BIGWASP Z1 Wireless Rotary Tattoo Cartridge Machine Pen User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your BIGWASP Z1 Wireless Rotary Tattoo Cartridge Machine Pen. Please read this manual thoroughly before operating the device to ensure proper function, maintenance, and longevity of your machine. Retain this manual for future reference.

2. Product Overview

The BIGWASP Z1 is a versatile wireless rotary tattoo machine designed for professional tattoo and SMP artists. It features an adjustable stroke mechanism, a powerful Swiss motor, and dual battery support for extended operation.

Key Features:

• Versatile Performance & Precision Control: Adjustable strokes from 2.6mm to 4.0mm and needle depth from 0-4.5 mm, suitable for lining, color packing, and shading.
• Long-lasting Battery & Continuous Work: Equipped with two rechargeable 2000mAh batteries, providing 6 to 10 hours of work time per battery.
• Wireless or Wired Flexibility: Operates cordlessly with a replaceable battery or can be connected via an RCA adapter for wired use.
• High-Quality Swiss Motor & Efficient Operation: Powered by a Swiss DC motor, delivering 10500rpm no-load speed for smooth and stable performance.
• Safety & Protection Features: Includes overload and short circuit prompts, along with automatic power-off for enhanced safety.

3. Setup

3.1 Battery Installation and Charging

The BIGWASP Z1 comes with two 2000mAh rechargeable lithium-ion batteries. Ensure batteries are fully charged before first use.

1. To install a battery, unscrew the bottom section of the machine.
2. Insert the 3.7V 18500 Li-ion battery with the positive (+) terminal facing inwards.
3. Screw the bottom section back onto the machine securely.
4. To charge, connect the provided Type-C charging cable to the machine's charging port and a suitable USB power adapter. Charging typically takes 2-3 hours.

3.2 Cartridge Needle Installation

The BIGWASP Z1 is compatible with most standard cartridge needles on the market.

1. Ensure the machine is powered off.
2. Gently push the cartridge needle into the machine's grip until it clicks into place.
3. To remove, twist the cartridge slightly and pull it out.

4. Operating Instructions

4.1 Power On/Off and Start/Pause

The machine features intuitive controls for power and operation.

• Power On/Off: Press and hold the power button (usually marked with a circle or 'C') for a few seconds to turn the machine on or off.
• Start/Pause: A short press of the power button will start or pause the machine's operation.

4.2 Voltage Adjustment

Adjust the voltage to suit your tattooing needs.

• Use the '+' button to increase voltage.
• Use the '-' button to decrease voltage.
• Long press the '+' or '-' button for continuous voltage adjustment.

4.3 Stroke Adjustment

The BIGWASP Z1 allows for precise stroke length adjustments.

• Rotate the stroke adjustment ring located on the machine body to select your desired stroke length (2.6mm to 4.0mm).
• Ensure the machine is off or paused when adjusting the stroke to prevent accidental activation.

4.4 Wired and Wireless Operation

The machine offers flexibility for both cordless and wired use.

• Wireless Mode: Operate using the internal rechargeable battery.
• Wired Mode: For continuous power or preference, attach an RCA adapter to the machine's RCA port and connect it to a compatible power supply.

5. Maintenance

5.1 Cleaning

Regular cleaning is essential for hygiene and optimal performance.

• Always disconnect the machine from any power source and remove the battery before cleaning.
• Wipe down the exterior of the machine with a clean cloth dampened with a suitable disinfectant solution.
• Do not immerse the machine in liquid.
• Ensure all surfaces are dry before reassembling or storing.

5.2 Storage

Store the machine in a clean, dry place away from direct sunlight and extreme temperatures. When storing for extended periods, ensure batteries are partially charged (around 50%) to prolong their lifespan.

6. Troubleshooting

• Machine not turning on: Ensure the battery is correctly installed and fully charged. If using wired mode, check RCA cable connection and power supply.
• Intermittent operation: Check battery connection. If using wired mode, inspect RCA cable for damage.
• Overload/Short Circuit: The machine has built-in protection. If an overload or short circuit is detected, the machine may display a prompt and automatically power off. Disconnect the power source or remove the battery, inspect for any issues (e.g., jammed needle, faulty cable), and restart.
• Unusual noise or vibration: Ensure the cartridge needle is properly seated. Check for any debris or damage to the internal components.

If issues persist, contact customer support for assistance.

7. Specifications

8. Safety Information

• Always use sterile, single-use cartridge needles.
• Ensure proper sanitation and sterilization protocols are followed for all equipment that comes into contact with skin.
• Do not operate the machine if it appears damaged or malfunctioning.
• Keep the machine away from water and excessive moisture. The machine is water resistant, but not waterproof.
• Store out of reach of children.
• Be aware of the machine's built-in overload and short circuit protection, which may cause automatic shutdown in unsafe conditions.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact BIGWASP customer service through the retailer where the product was purchased or visit the official BIGWASP website. Please have your product model number and purchase date available when contacting support.