Towallmark C1632

Towallmark 18ft x 36ft Rectangle Pool Solar Cover, 300µm Instruction Manual

Heat Retaining Blanket for In-Ground and Above-Ground Rectangular Swimming Pools

Introduction

Thank you for choosing the Towallmark 18ft x 36ft Rectangle Pool Solar Cover. This 300µm heat-retaining blanket is designed to enhance your swimming experience by reducing water evaporation, retaining heat, and keeping your pool clean. This manual provides essential information for the proper setup, operation, and maintenance of your solar cover.

Towallmark 18ft x 36ft Rectangle Pool Solar Cover deployed on a rectangular pool, showing its heat retention and evaporation reduction benefits.

Image: The Towallmark solar cover covering a rectangular pool, illustrating its primary function.

Safety Information

Please read and understand all safety instructions before using this product.

  • Avoid exposure to sharp objects to prevent damage to the cover.
  • Avoid prolonged direct sunlight exposure when the cover is not on the pool, as this can degrade the material.
  • Keep out of reach of children to prevent entrapment or suffocation. This cover is not a safety cover and will not support the weight of a person or pet.

Product Features

The Towallmark Solar Cover offers several benefits for your pool:

  • Superior Water Evaporation Reduction: Reduces water evaporation by over 95%, conserving water and reducing chemical loss.
  • Heat Retention: Helps maintain water temperature, allowing for an extended swimming season. Experiments show it can maintain water temperature at 1.8℃ even in lower environmental temperatures.
  • Pool Cleanliness: Acts as a barrier to keep leaf litter, insects, and other debris out of your pool.
  • Durable Material: Made from high-quality international standard LDPE with a 300µm bubble thickness, designed to withstand UV radiation.
  • Customizable Fit: Can be easily trimmed to fit unique pool shapes.
Close-up of the blue solar cover material showing its bubble design, 14mil thickness, 9mm air nubble diameter, 90% water evaporation reduction, and heat retention up to 10°C/50°F.

Image: Detailed view of the solar cover's bubble design and key specifications.

The solar cover on a pool, highlighting features like Standard LDEP Material, Chlorine Resistant, Sun Protection, and Easy to Clean.

Image: The solar cover in use, emphasizing its material properties and benefits.

Setup

1. Unpacking and Unrolling

Carefully unpack the solar cover from its packaging. Unroll the cover next to your pool. The cover may have creases from packaging; these will typically relax once the cover is on the water and exposed to sunlight.

2. Trimming to Fit (if necessary)

The Towallmark solar cover is designed to be easily trimmed to fit various pool shapes. If your pool is not a standard rectangle, or if you desire a custom fit, follow these steps:

  1. Place the solar cover over your pool, ensuring it covers the entire water surface.
  2. Using a marker, carefully trace the outline of your pool onto the cover. Allow for a slight overlap if desired, but ensure the cover floats entirely on the water.
  3. Remove the cover from the pool and use sharp scissors to cut along the marked lines.
Illustration showing how to measure the pool, mark the size on the solar cover, and cut off excess parts with scissors to fit various pool shapes.

Image: Steps for customizing the solar cover to your pool's shape.

3. Initial Placement

Once trimmed, place the cover back onto the pool surface. Ensure the bubble side faces down into the water. The bubbles are designed to trap solar heat and transfer it to the water, while the smooth side faces up to absorb sunlight.

Diagram illustrating thermal insulation with the bubble side of the solar cover facing down into the water to retain heat.

Image: Diagram showing the correct orientation of the solar cover for thermal insulation.

Operating Instructions

Daily Use

For optimal performance, deploy the solar cover on your pool when it is not in use, especially overnight and during cooler periods. This maximizes heat retention and minimizes evaporation.

  • Deploying the Cover: Gently pull the cover across the water surface until it completely covers the pool. If using a solar reel (sold separately), slowly crank the reel to unroll the cover.
  • Removing the Cover: When you are ready to use the pool, carefully pull the cover off the water. If using a solar reel, crank the reel to roll up the cover.
A person operating a solar reel to roll up the pool cover, demonstrating ease of use.

Image: A person demonstrating the use of a solar reel to manage the pool cover.

Indoor/Outdoor Use

This solar cover is suitable for both indoor and outdoor swimming pools, providing heat retention and debris protection in various environments.

Two images showing the solar cover in use: one on an indoor pool and one on an outdoor pool, illustrating its versatility.

Image: The solar cover applied to both indoor and outdoor pools.

Maintenance

Proper care will extend the lifespan of your Towallmark Solar Cover:

  • Cleaning: Clean the cover with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the material. Rinse thoroughly.
  • Drying: Allow the cover to dry completely before folding or storing. This prevents mildew and material degradation.
  • Storage: When not in use for extended periods (e.g., during winter), store the cover in a cool, dry place away from direct sunlight and sharp objects. Rolling it onto a solar reel or folding it neatly can help prevent creases and damage.
  • Avoid Sharp Objects: Keep the cover away from sharp edges or objects that could puncture or tear the material.
Before and after images of a pool, demonstrating how the solar cover protects water quality by preventing dust, leaves, insects, and debris from falling into the pool.

Image: The solar cover's effectiveness in keeping debris out of the pool.

Troubleshooting

Here are solutions to common issues you might encounter:

  • Issue: Pool water is not heating sufficiently.
    Solution: Ensure the bubble side of the cover is facing down into the water. Verify that the cover is fully extended over the pool surface during sunny hours. Check for any gaps or areas where the cover is not making full contact with the water.
  • Issue: Debris is still entering the pool.
    Solution: Confirm the cover is fully extended and covers the entire pool surface, leaving no significant gaps around the edges. Ensure the cover is not damaged, allowing debris to fall through.
  • Issue: Cover is tearing or degrading prematurely.
    Solution: Inspect for contact with sharp objects or rough pool edges. Ensure the cover is not left exposed to direct sunlight for extended periods when rolled up or stored, as UV exposure can accelerate degradation. Proper storage in a cool, dry, shaded area is crucial.
  • Issue: Cover is difficult to deploy or remove.
    Solution: Consider investing in a solar reel system (sold separately) to simplify the process of covering and uncovering your pool.

Specifications

FeatureDetail
BrandTowallmark
Model NameC1632
Size18ft x 36ft (432"L x 216"W)
ColorBlue
Style/Thickness300µm
MaterialLDPE (Low-Density Polyethylene)
Installation TypeFloating
ShapeRectangular (Trimmable)
Additional FeaturesFoldable, UV Resistant, Chlorine Resistant
UPC196336074782

Warranty and Support

For warranty information or product support, please refer to the product listing on Amazon or contact Towallmark customer service directly through their official channels. Keep your purchase receipt as proof of purchase.

You can visit the Towallmark Store for more information: Towallmark Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.