1. Product Overview
The HUGMAPLE X20 Cordless 72W UV/LED Nail Lamp is designed for efficient and convenient curing of gel nails. It features a powerful 72W output with 30 LED beads, ensuring quick and even drying. The lamp is equipped with smart infrared sensors for automatic operation, a large heart-shaped touch display with multiple timer settings, and a rechargeable battery for cordless use. Its detachable base allows for easy cleaning and accommodates both fingernails and toenails.
Image: Top-down view of the HUGMAPLE X20 nail lamp, highlighting the infrared sensor lights and 30 LED beads for efficient curing.
Image: Close-up of the heart-shaped LCD display on the HUGMAPLE X20 nail lamp, showing the 5 timer setting buttons and battery level indicator.
Image: The HUGMAPLE X20 nail lamp, illustrating its cordless and rechargeable features with icons for battery capacity, charging time, and working duration.
2. Safety Instructions
- Use only the original charger provided for charging the device.
- Do not expose the device to water or other liquids.
- Keep out of reach of children.
- Avoid direct eye exposure to the UV/LED light.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
- Ensure proper ventilation during use.
3. Setup and First Use
3.1. Charging the Device
- Clean the device before first use.
- Connect the original charger to the lamp's charging port and plug it into a power outlet.
- The battery indicator on the display will show charging status. A full charge takes approximately 3 hours and provides up to 7 hours of operation.
- The lamp can also charge other devices via its USB output port when needed.
Image: The HUGMAPLE X20 nail lamp demonstrating its USB power supply feature, capable of charging a smartphone, nail drill, or mini dryer.
3.2. Initial Setup
- Ensure the lamp is placed on a stable, flat surface.
- Remove any protective films from the display and sensor areas.
4. Operating Instructions
4.1. Power On/Off
- Locate the power switch on the back of the device to turn it on or off.
4.2. Timer Settings
The lamp features a touch-sensitive display with five preset timer buttons:
- 10s: For quick flash curing or thin gel layers.
- 30s: Standard curing time for many gel polishes.
- 60s: Recommended for regular gel polishes.
- 90s: Ideal for darker colors or thicker gel applications.
- 99s (Low Heat Mode): A low-temperature mode designed for sensitive nails or for curing builder gels to minimize heat spikes.
Select the desired curing time by touching the corresponding button on the display. The countdown will begin once your hand is inserted.
Image: The HUGMAPLE X20 nail lamp's display with explanations for each of the 5 timer settings, including the 99s Low Heat Mode.
4.3. Auto Sensor Function
The intelligent infrared sensor automatically detects when a hand or foot is inserted into the lamp, turning the lights on. When the hand or foot is removed, the lights turn off. This feature provides a seamless and hands-free curing experience.
Video: A short demonstration of the HUGMAPLE X20 nail lamp's auto-sensor feature, showing the lights activating when a hand is placed inside and turning off when removed.
4.4. Curing Gel Polish
- Apply your desired gel polish according to the manufacturer's instructions.
- Place your hand or foot inside the lamp, ensuring your nails are centered under the LED beads for optimal curing.
- Select the appropriate timer setting. The lamp will automatically start.
- Once the timer completes, remove your hand/foot.
- This lamp is compatible with all types of gel polishes, including base coats, top coats, colored gels, hard gels, poly gels, adhesives, acrylic resins, sculpting gels, and gem gels. Note: Regular nail polish is not applicable.
Video: A user demonstrating the HUGMAPLE X20 nail lamp in use, showing how to place hands inside for curing and interacting with the touch controls.
5. Maintenance
5.1. Cleaning
- The lamp features a removable base for easy cleaning. Gently detach the base from the main unit.
- Wipe the interior and exterior surfaces with a soft, dry cloth. For stubborn stains, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the electronic components.
- Ensure the device is completely dry before reattaching the base and using it again.
Image: The HUGMAPLE X20 nail lamp with its detachable base, illustrating how it can be separated for easy cleaning and maintenance.
6. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Lamp not turning on. | Battery low or depleted; Power switch off; Charger not connected properly. | Charge the lamp fully using the original charger. Ensure the power switch is in the 'ON' position. Verify charger connection. |
| Gel not curing properly. | Incorrect timer setting; Insufficient curing time; Nails not positioned correctly; Gel type incompatible (e.g., regular polish). | Select the appropriate timer setting for your gel type. Ensure nails are centered under the LED beads. Confirm you are using gel polish, not regular nail polish. |
| Auto-sensor not working. | Obstruction near sensor; Hand not fully inserted. | Clear any debris from the sensor area. Ensure your entire hand or foot is fully inserted into the lamp. |
| Display shows incorrect time or glitches. | Temporary software glitch; Low battery. | Turn the lamp off and then on again. Ensure the lamp is fully charged. If the issue persists, contact customer support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | X20 |
| Power | 72W |
| Product Dimensions | 7.68 x 7.68 x 3.75 inches |
| Weight | 2.07 Pounds |
| Battery Type | 2 Lithium Polymer batteries (included) |
| Charging Time | Approx. 3 hours |
| Operating Time (Full Charge) | Up to 7 hours |
| Light Source | UV/LED (30 lamp beads) |
| Timer Settings | 10s, 30s, 60s, 90s, 99s (Low Heat Mode) |
| Special Features | Smart Auto Infrared Sensor, Touch Control, Large Smart Display, Cordless, Rechargeable, Detachable Base, USB Power Output |
| Material Type | Diamond (referring to the aesthetic finish) |
| Manufacturer | HUGMAPLE |
8. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact HUGMAPLE customer service through the retailer where the product was purchased or refer to the contact details provided in the product packaging. Please retain your proof of purchase for warranty claims.