Introduction
Welcome to the Olafus 50W LED Work Light instruction manual. This guide provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.
Safety Instructions
- Ensure the power supply voltage matches the product's requirements (120 Volts AC).
- Do not look directly into the LED light source when it is active.
- Keep the power cord away from heat, sharp edges, and moving parts.
- Do not operate the light if the cord or plug is damaged.
- Ensure the light is placed on a stable surface to prevent tipping.
- Although IP65 waterproof, avoid submerging the unit.
- Disconnect power before cleaning or maintenance.
- This product is not dimmable. Do not attempt to connect it to a dimmer switch.
Package Contents
- Olafus 50W LED Work Light (Model LEA50A)
- Integrated Stand
- 16.4 ft (5m) Power Cord with Switch
- Instruction Manual
Product Features
- High Luminosity: 50W LED with 5000 lumens output, 6000K daylight white light.
- Portable & Stable Design: 180° adjustment bracket and 360° adjustable lamp head for easy positioning and storage.
- IP65 Waterproof: Suitable for outdoor and damp environments.
- Long Switch Cord: 16.4 ft (5m) power cord with an integrated on/off switch.
- Efficient Heat Dissipation: Die-cast aluminum bar-shaped backplate for effective cooling.
- Wide Beam Angle: 120° beam angle for broad illumination, shadow-free and anti-glare.
- Material: Aluminum body, plastic shade.
- Dimensions: 10.63"L x 2.76"W x 12.6"H.
- Weight: Approximately 2.97 pounds.
Setup
The Olafus 50W LED Work Light comes pre-assembled.
- Unpacking: Carefully remove the work light from its packaging.
- Positioning: Place the work light on a flat, stable surface. Adjust the 180° bracket and 360° lamp head to direct the light as needed.
- Power Connection: Uncoil the 16.4 ft power cord. Plug the power cord into a standard 120V AC electrical outlet.
Operation
- Turning On/Off: Use the integrated switch located on the power cord to turn the light on or off.
- Adjusting Light Angle: Loosen the adjustable screws on the side of the stand to rotate the lamp body 360 degrees. The stand itself can be adjusted up to 170 degrees. Tighten the screws after adjustment to secure the position.
Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, fold the stand for compact storage. Store in a dry place.
- Cord Inspection: Regularly inspect the power cord and plug for any signs of damage. If damaged, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. | Check if the power cord is securely plugged into a live outlet. Ensure the switch on the cord is in the "ON" position. |
| Light flickers. | Unstable power connection. | Check power connections. If flickering persists, try a different outlet. |
| Light is not bright enough. | Incorrect placement or distance. | Adjust the position of the light to optimize illumination for your workspace. Ensure the area is within the effective coverage of 108 sq ft. |
Specifications
| Model | LEA50A |
| Wattage | 50 Watts |
| Lumen Output | 5000 LM |
| Color Temperature | 6000K (Daylight White) |
| Voltage | 120V AC |
| Beam Angle | 120° |
| Waterproof Rating | IP65 |
| Cord Length | 16.4 ft (5 meters) |
| Material | Aluminum (body), Plastic (shade) |
| Dimensions (L x W x H) | 10.63" x 2.76" x 12.6" |
| Item Weight | 2.97 lbs |
| Manufacturer | Olafus |
Warranty and Support
For warranty information or technical support, please contact Olafus customer service. Refer to the product packaging or the official Olafus website for contact details.
