1. Introduction
Thank you for choosing the ARGENDON 70 Pint Commercial Dehumidifier. This manual provides essential information for the safe and efficient operation of your new dehumidifier. Please read it thoroughly before use and keep it for future reference. This dehumidifier is designed for effective moisture removal in basements, crawl spaces, and various commercial settings, improving air quality and protecting your property.
2. Important Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury, always follow these basic precautions:
- Read all instructions before using the appliance.
- Ensure the power supply matches the rating label on the unit.
- Do not operate the unit with a damaged cord or plug.
- Do not use the unit near water or in excessively damp environments.
- Keep the unit away from heat sources and direct sunlight.
- Do not block air inlets or outlets.
- Always unplug the unit before cleaning or performing maintenance.
- This dehumidifier meets strict ETL safety standards.
- Warm Reminder: If the dehumidifier has frosting, please check whether the ambient temperature is below 65°F. Frosting below 65°F is a normal phenomenon. It takes about 20 to 40 minutes to frost, followed by a 7-minute defrosting phase, in a sequential cycle.
3. Product Features
- 70 Pint Dehumidifier: Effectively removes 70 pints of moisture per day with an air output of 115 CFM. Ideal for areas up to 1000 square feet.
- Multi-functional Commercial Dehumidifier: Features automatic and continuous gravity drainage, reducing the need for frequent water pouring. Convenient control knob for easy manual adjustment of air humidity. Operates with a low noise level at 50 dBA. Includes automatic restart, auto defrost, and memory functions.
- Energy Star Certified: Designed to reduce energy consumption and greenhouse gas emissions. Comes with a Merv-1 removable filter for easy replacement.
- Compact & Portable: Thoughtfully designed with adjustable leveling feet and ergonomic handles for effortless placement in various spaces like crawl spaces, closets, bathrooms, RVs, and boats. Lightweight at only 37.8 lbs.
- Adjustable Humidity Control: Intuitive manual rotary knob allows selection from three pre-set humidity levels (30%, 50%, or 70%) or continuous mode (CONT) for constant operation.
4. Package Contents
Your ARGENDON Dehumidifier package includes:
- ARGENDON Dehumidifier Unit
- User Manual (this document)
- Drain Hose
- Merv-1 Filter
5. Setup
- Unpacking: Carefully remove the dehumidifier and all accessories from the packaging.
- Placement: Place the unit on a stable, level surface in the desired area (e.g., basement, crawl space, garage). Ensure there is adequate space around the unit for proper airflow.
- Adjustable Feet: Utilize the adjustable leveling feet to ensure the unit is stable and slightly elevated if using gravity drainage.
- Drainage Setup:
- Continuous Drainage: For continuous operation without manual emptying, connect the provided drain hose to the drainage outlet on the unit. Route the hose to a suitable drain (e.g., floor drain, sink). Ensure the hose is sloped downwards to allow for gravity flow.
- Manual Drainage: If continuous drainage is not desired, ensure the drainage outlet plug is securely in place. The unit will alert you when the internal reservoir is full.
- Power Connection: Plug the power cord into a grounded electrical outlet.
6. Operating Instructions
The ARGENDON dehumidifier features a convenient rotary knob control panel for easy operation.
Control Panel Overview:
- Rotary Knob: Used to select the desired humidity level or operation mode.
- Power Indicator: Illuminates green when the machine is turned on.
- Defrost Indicator: Illuminates when the machine is defrosting. Otherwise, it will remain off.
- Full Indicator: Illuminates when the water reservoir is full (if not using continuous drainage).
- Fault Indicator: Blinks twice to indicate an "EI" error.
Operation Modes:
- OFF: Turns the unit off.
- CONT (Continuous): The unit will run continuously regardless of the humidity level until manually turned off or the reservoir is full (if not using continuous drainage).
- Humidity Settings (30%, 50%, 70%): Select your desired humidity level. The unit will operate until the ambient humidity reaches the set point, then it will automatically turn off. It will restart when the humidity rises above the set point.
Additional Functions:
- Automatic Restart: The unit will automatically restart with previous settings after a power outage.
- Auto Defrost: Prevents coils from freezing, ensuring efficient performance in challenging environments.
- Memory Function: Retains your last settings even after power interruptions.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your dehumidifier.
Filter Cleaning:
- The unit comes with a Merv-1 removable filter.
- This filter is washable and reusable.
- To clean, simply slide out the filter from its slot.
- Wash the filter with warm, soapy water, rinse thoroughly, and allow it to air dry completely before reinserting.
- It is recommended to replace the filter every 3-6 months, depending on the air quality of the space in which the filter is used.
General Cleaning:
- Wipe the exterior of the unit with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the unit is unplugged before any cleaning.
8. Troubleshooting
If you encounter issues with your dehumidifier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Unit does not turn on | No power; Power cord not plugged in; Power outage | Check power outlet; Ensure cord is securely plugged in; Check circuit breaker | ||||||||||
| Unit not dehumidifying | Humidity setting too high; Air filter clogged; Ambient temperature too low | Lower humidity setting; Clean or replace air filter; Ensure ambient temperature is above 65°F | ||||||||||
Related Documents - Shield 35M
|
