Introduction
Thank you for purchasing the PEXMOR Foldable Indoor Basketball Arcade Game Set. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new game set. Please read these instructions carefully before initial use to ensure safe and enjoyable play.
Important Safety Information
To reduce the risk of serious injury, please observe the following safety precautions:
- Adult supervision is recommended, especially for younger users.
- This product is recommended for ages 12 years and up.
- Ensure all parts are correctly assembled and securely fastened before each use. Regularly check for loose bolts or damaged components.
- Do not hang on the basketball rim or frame.
- Keep hands and fingers clear of moving parts during folding and unfolding.
- Use only the provided basketballs or balls of similar size and weight.
- Do not modify the product in any way.
- Keep the product away from water and excessive moisture.
Package Contents
Please verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- 1 x Foldable Basketball Arcade Frame
- 1 x Electronic Scoreboard
- 3 x Mini Basketballs
- 1 x Air Pump
- Assembly Hardware (bolts, nuts, washers, etc.)
- Instruction Manual (this document)
Image: Included accessories - mini basketballs, air pump, and electronic scoreboard detail.
Assembly and Setup
Assembly typically requires two adults. Follow the numbered steps in the included detailed installation manual. Ensure you identify each part correctly using the numbers taped on the iron tubes.
- Unpack Components: Carefully remove all parts from the packaging and lay them out. Verify all parts against the package contents list.
- Assemble Frame: Begin by connecting the main frame pieces. Pay close attention to the orientation of each bar, especially curved or angled pieces, to ensure proper alignment. Secure connections with the provided bolts and washers. (Note: Some users have reported issues with hole alignment; ensure parts are not forced and check for any internal obstructions like metal shavings before assembly.)
- Attach Backboard and Rim: Secure the premium MDF backboard to the frame, followed by the steel rim and net.
- Install Ball Return Ramp: Attach the waterproof Oxford cloth ball return ramp to the frame.
- Mount Electronic Scoreboard: Install the electronic scoreboard in its designated position. Ensure it is securely attached and that the infrared sensors are unobstructed.
- Inflate Basketballs: Use the provided air pump to inflate the mini basketballs to the recommended pressure.
- Final Check: Before first use, double-check all bolts and connections to ensure they are tight and secure.
Image: The PEXMOR basketball arcade game fully assembled.
Image: Assembled and storage dimensions of the game set.
Operation
The PEXMOR Foldable Indoor Basketball Arcade Game Set is designed for single-player use, offering an engaging arcade experience.
- Power On: Locate the power switch on the electronic scoreboard and turn it on.
- Start Game: The scoreboard will typically display a countdown or be ready for play.
- Shoot Baskets: Throw the mini basketballs towards the hoop. The proprietary infrared sensors will detect successful shots and automatically update the score on the digital display.
- Sound Effects: The game features integrated sound effects to enhance the playing experience.
- Ball Return: Missed shots and successful baskets will roll down the Oxford cloth ramp, returning the balls to the player for continuous play.
- End Game: The game typically has a timed mode. Once the timer runs out, the final score will be displayed. Turn off the scoreboard when not in use to conserve battery life.
Image: Users enjoying the PEXMOR basketball arcade game.
Image: A child playing the PEXMOR basketball arcade game.
Maintenance
Regular maintenance will extend the life and performance of your PEXMOR basketball arcade game.
- Cleaning: Wipe down the frame, backboard, and ball return ramp with a damp cloth. Avoid abrasive cleaners or solvents.
- Check Connections: Periodically inspect all bolts, nuts, and connections to ensure they remain tight. Tighten any loose hardware.
- Ball Inflation: Check the inflation of the mini basketballs regularly and re-inflate with the air pump as needed.
- Storage: The game features a quick-folding design for compact storage. To fold, pull out the pin beneath the frame to collapse it. This saves up to 60% of space. Store in a dry place away from direct sunlight and extreme temperatures.
Image: The game set folded for compact storage.
Image: Slim profile of the game set in folded position.
Troubleshooting
If you encounter issues with your PEXMOR basketball arcade game, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Electronic scoreboard not turning on. | Batteries are dead or incorrectly installed. | Check battery compartment for correct polarity and replace batteries if necessary. |
| Scoreboard not registering shots accurately. | Infrared sensors are obstructed or dirty. | Ensure nothing is blocking the sensors. Gently clean sensors with a soft, dry cloth. |
| Game feels unstable or wobbly. | Loose assembly bolts or uneven surface. | Tighten all assembly bolts. Ensure the game is placed on a flat, level surface. Check that anti-slip pads are intact. |
| Balls do not return smoothly. | Obstruction in the ball return ramp or ramp is not properly aligned. | Check the Oxford cloth ramp for any debris or wrinkles. Ensure the ramp is securely attached and properly angled. |
| Missing or damaged parts during assembly. | Manufacturing defect or shipping damage. | Do not attempt to force parts. Contact PEXMOR customer support immediately for replacement parts. |
Image: Rear view of the electronic scoreboard, indicating sound output.
Specifications
- Model: B0CF2D1PSM
- Brand: PEXMOR
- Assembled Dimensions (L x W x H): Approximately 82" x 24.5" x 82" (Length x Width x Height)
- Folded Dimensions (L x W x H): Approximately 24.5" x 35" x 82" (Length x Width x Height)
- Frame Material: Durable Steel
- Backboard Material: Premium MDF (Medium-Density Fiberboard)
- Ball Return Material: Waterproof Oxford Cloth
- Scoring System: Electronic with Proprietary Infrared Sensors
- Included Accessories: 3 x Mini Basketballs, 1 x Air Pump
- Recommended Age: 12 years and up
Image: Features highlighting sturdy construction and materials.
Warranty and Customer Support
For information regarding product warranty, please refer to the warranty card included with your purchase or contact PEXMOR customer service directly. PEXMOR is committed to providing quality products and support.
If you have any questions, require assistance with assembly, or need replacement parts, please contact PEXMOR customer support through their official channels. Please have your product model number (B0CF2D1PSM) and purchase date available when contacting support.
Contact information for PEXMOR can typically be found on their official website or through the retailer where the product was purchased.
