Rgdood U80N Automatic Upper Arm Blood Pressure Monitor User Manual

1. Introduction

Thank you for choosing the Rgdood U80N Automatic Upper Arm Blood Pressure Monitor. This device is designed for convenient and accurate measurement of blood pressure and pulse rate at home. It features a large display, dual-user memory, and multiple power options for ease of use. Please read this manual thoroughly before using the device to ensure correct operation and accurate readings.

2. Safety Information

• Consult your physician before using this device if you have any medical conditions.
• Do not use this device for diagnosis or treatment of any health problem or disease.
• Keep the device out of reach of children.
• Do not use the device in a moving vehicle.
• Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes before measurement.
• Rest for at least 5 minutes before taking a measurement.

3. Package Contents

Verify that all items are present in the package:

• 1 x Rgdood U80N Blood Pressure Monitor
• 1 x Arm Cuff (22-42 cm / 8.5"-16.5")
• 4 x AAA Batteries
• 1 x DC 6V USB-A Cable
• 1 x Storage Pouch
• 1 x User Manual (this document)

Image: The package contents including the monitor, cuff, batteries, USB cable, and pouch.

4. Product Overview

The Rgdood U80N monitor features a large display and intuitive buttons for easy operation.

Image: Detailed view of the monitor's display, showing indicators for time, systolic/diastolic blood pressure, heart rate, memory symbol, and buttons (MEM, SET, START/STOP).

Display Indicators:

• SYS (Systolic Blood Pressure): The top number, indicating pressure when the heart beats.
• DIA (Diastolic Blood Pressure): The bottom number, indicating pressure when the heart rests between beats.
• PUL (Pulse Rate): Heartbeats per minute.
• Memory Symbol: Indicates a reading stored in memory.
• User Icon: Indicates which user (User 1 or User 2) is selected.
• Time/Date: Displays the current time and date.

Buttons:

• START/STOP Button: Powers the device on/off and starts/stops a measurement.
• MEM (Memory) Button: Accesses stored measurement data.
• SET Button: Used for setting date/time and switching users.

5. Setup

5.1 Power Source

The monitor can be powered by either AAA batteries or a DC 6V USB-A cable.

Image: The monitor displaying its dual power options: 4 AAA batteries (inserted into the battery compartment) and a DC 6V USB-A cable connection.

Battery Installation:

1. Open the battery compartment cover on the back of the monitor.
2. Insert 4 AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover.

DC Power Connection:

Connect the provided DC 6V USB-A cable to the monitor's power port and plug the other end into a compatible USB power adapter (not included) or a USB port.

5.2 Setting Date and Time

Accurate date and time settings are crucial for tracking your measurements.

1. With the device powered off, press and hold the SET button for a few seconds until the year starts flashing.
2. Press the MEM button to adjust the year.
3. Press SET again to confirm the year and move to the month setting.
4. Repeat the process using MEM to adjust and SET to confirm for month, day, hour, and minute.
5. Once all settings are confirmed, the device will exit setting mode.

6. Operating Instructions

6.1 Applying the Arm Cuff

Proper cuff placement is essential for accurate readings.

Image: An illustration demonstrating how to correctly wrap the adjustable arm cuff (22-42 cm) around the upper arm, ensuring the tube is positioned correctly.

1. Ensure the cuff is connected securely to the monitor's port.
2. Place the cuff on your bare upper arm, approximately 2-3 cm (0.8-1.2 inches) above the elbow joint.
3. The air tube should run down the center of your arm, aligned with your middle finger.
4. Wrap the cuff snugly around your arm, ensuring it is not too tight or too loose. The index line should fall within the range indicated on the cuff.
5. Sit upright with your feet flat on the floor, and rest your arm on a table so the cuff is at heart level.

6.2 Taking a Measurement

1. Press the START/STOP button to turn on the monitor. The cuff will automatically inflate.
2. Remain still and silent during the measurement. Avoid talking or moving.
3. Once the measurement is complete, the cuff will deflate, and your systolic pressure, diastolic pressure, and pulse rate will be displayed on the screen.
4. The reading will automatically be stored in the selected user's memory.
5. Press the START/STOP button again to turn off the monitor, or it will automatically shut off after 3 minutes of inactivity.

6.3 Dual User Functionality

The monitor supports two users, each with 90 memory slots.

Image: The monitor displaying its dual user feature, with instructions on how to switch between User 1 and User 2 using the SET and MEM buttons.

Switching Users:

1. With the device powered off, press the SET button. The current user icon will flash.
2. Press the MEM button to toggle between User 1 and User 2.
3. Press SET again to confirm your selection.

6.4 Viewing Memory Records

To review past measurements:

1. With the device powered off, press the MEM button.
2. The most recent reading will be displayed first.
3. Press the MEM button repeatedly to scroll through older readings.
4. To exit memory mode, press the START/STOP button or wait for automatic shut-off.

7. Understanding Your Readings

The monitor displays Systolic (SYS), Diastolic (DIA), and Pulse (PUL) readings. It also features an irregular heartbeat detection symbol.

Image: A man holding his chest, with the blood pressure monitor in the foreground displaying an irregular heartbeat detection symbol, indicating the device's capability to monitor heart health.

Blood Pressure Classification:

Blood pressure categories are defined by health organizations. Consult your doctor for interpretation of your readings.

Note: This table is for general reference. Always consult a healthcare professional for medical advice.

8. Maintenance

8.1 Cleaning

• Wipe the monitor and cuff with a soft, dry cloth.
• If necessary, use a slightly damp cloth with mild soap, then wipe dry.
• Do not use abrasive cleaners or immerse the device in water.

8.2 Storage

• Store the device in its storage pouch in a cool, dry place.
• Avoid extreme temperatures, direct sunlight, and high humidity.
• If not using for an extended period, remove the batteries to prevent leakage.

9. Troubleshooting

If you encounter issues with your monitor, refer to the following table:

10. Specifications

• Model: U80N
• Measurement Method: Oscillometric
• Cuff Size: 22-42 cm (8.5"-16.5")
• Memory: 2 users x 90 sets of readings
• Power Source: 4 x AAA batteries (included) or DC 6V USB-A cable (included)
• Display Type: Large Digital Display
• Product Dimensions: 2.75"L x 2.3"W x 1.57"Th
• Item Weight: 8 ounces
• Automatic Shut-off: Yes, after 3 minutes of inactivity

11. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Rgdood website. Keep your purchase receipt as proof of purchase.