1. Introduction
Thank you for choosing the VEVOR Acrylic Folding Tray Table. This manual provides essential information for the safe and efficient use of your new table. Please read these instructions carefully before assembly and operation, and retain them for future reference.
2. Safety Information
To ensure safe operation and prolong the life of your product, please observe the following safety guidelines:
- Protective Film: Remove the protective film from all acrylic surfaces after installation.
- Cleaning Agents: Avoid using alcohol or harsh chemical cleaners on the acrylic material, as this may cause damage or discoloration. Use a damp cloth for cleaning.
- Outdoor Exposure: This table is designed for indoor use. Avoid prolonged outdoor exposure, especially direct sunlight, to prevent material degradation.
- Weight Capacity: Do not exceed the maximum weight recommendation of 22 lbs (10 kg) on the tabletop.
- Stability: Ensure the table is placed on a flat, stable surface to prevent tipping. The X-shaped leg design and slip-proof pads enhance stability.
3. Package Contents
Upon unpacking, please verify that all components are present and undamaged:
- 1 x VEVOR Acrylic Folding Tray Table (Model JYFT-001R)
- 1 x Assembly Guide (This document)
- Necessary Fasteners (e.g., bolts)
- Allen Key (if required for minor assembly)
4. Specifications
| Brand | VEVOR |
| Model Number | JYFT-001R |
| Product Dimensions (D x W x H) | 11.4" x 15.7" x 22.8" (290 x 400 x 580 mm) |
| Item Weight | 3.7 lbs (1.7 kg) |
| Maximum Weight Recommendation | 22 lbs (10 kg) |
| Frame Material | Acrylic (5 mm thick) |
| Tabletop Features | 1.8-inch raised edge |
| Special Features | Foldable, Portable, X-shaped leg with slip-proof pads |
| Recommended Uses | Living Room, Bedroom, Study |
| Indoor/Outdoor Usage | Indoor (Avoid prolonged outdoor exposure) |
| Assembly Tools Recommended | Allen Key (if needed) |
| Product Care Instructions | Wipe with Damp Cloth |
5. Setup and Assembly
The VEVOR Acrylic Folding Tray Table is designed for quick and easy setup. It arrives almost ready to use, requiring minimal assembly.
- Unpack: Carefully remove all components from the packaging.
- Unfold the Legs: Gently unfold the X-shaped legs until they are fully extended and locked into position. Ensure all hinges are secure.
Figure 5.1: Unfolding the table. The table features a simple folding design for easy setup and storage. - Remove Protective Film: Peel off any protective film from the acrylic surfaces of the tabletop and legs. This film protects the table during shipping.
- Final Check: Ensure the table is stable and all parts are securely in place before placing any items on it.
6. Operating Instructions
The VEVOR Acrylic Folding Tray Table is designed for versatile use in various indoor settings.
- Placement: Position the table next to a sofa, bed, or in a study area or balcony corner. Its compact and clear design allows it to blend seamlessly with various home decor styles.
Figure 6.1: Examples of table placement in different indoor environments. - Functionality: Use the tabletop for holding beverages, snacks, books, remote controls, or as a temporary workstation for a laptop. The 1.8-inch raised edge helps prevent items from sliding off.
Figure 6.2: The table in use as a workstation, demonstrating the raised edge for item security. - Portability: When not in use, the table can be easily folded and stored, making it ideal for small spaces or for moving between rooms.
7. Maintenance
Proper care will help maintain the appearance and longevity of your acrylic table.
- Cleaning: Wipe the table surfaces with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, damp cloth and drying thoroughly.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or alcohol-based products, as these can damage the acrylic finish.
- Scratch Prevention: While acrylic is durable, avoid dragging sharp or abrasive objects across the surface to prevent scratches.
- Storage: When folded for storage, keep the table in a dry, cool place away from direct sunlight.
8. Troubleshooting
If you encounter any issues with your VEVOR Acrylic Folding Tray Table, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly or unstable. | Legs not fully extended or locked; uneven surface. | Ensure the X-shaped legs are fully unfolded and securely locked. Place the table on a flat, level surface. Check if any fasteners are loose and tighten them with an Allen key if necessary. |
| Scratches on the acrylic surface. | Abrasive cleaning or contact with sharp objects. | For minor scratches, specialized acrylic polish may help. Prevent future scratches by using soft cloths for cleaning and avoiding abrasive materials. |
| Discoloration or haziness of acrylic. | Exposure to harsh chemicals or prolonged direct sunlight. | Avoid using alcohol or strong cleaning agents. Keep the table indoors and out of prolonged direct sunlight. |
9. Warranty and Support
VEVOR is committed to providing high-quality products. For warranty information, technical support, or any questions regarding your VEVOR Acrylic Folding Tray Table (Model JYFT-001R), please contact VEVOR customer service directly.
Please refer to the official VEVOR website or your purchase documentation for the most up-to-date contact information and warranty details.
VEVOR Official Website: www.vevor.com