FLYLINKTECH BD20 Car Battery Jump Starter with Air Compressor User Manual

Introduction

Thank you for choosing the FLYLINKTECH BD20 Car Battery Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting power, efficient tire inflation, and portable charging capabilities for your electronic devices. Please read this manual thoroughly before use to ensure safe and optimal performance.

What's in the Box

Your FLYLINKTECH BD20 package includes the following items:

• 1 X Portable Car Jump Starter BD20
• 1 X Jumper Cable With Clamps
• 1 X USB-C Cable
• 1 X DC Cigarette Lighter
• 1 X Hose
• 3 X Valve Adapters
• 1 X User Manual
• 1 X Portable EVA Carrying Case

Figure 1: All components included in the FLYLINKTECH BD20 package.

Key Features

High-Efficiency Battery Starter

The BD20 car jumper starter portable boasts a 5000A peak current and enhanced smart clamps, capable of starting completely dead or low-voltage car batteries in seconds, even in extreme temperatures (-20℃ to 60℃). It is specifically designed for all gas engines and diesel engines up to 10.0L, offering powerful and safe operation for on-the-go use.

Figure 2: The jump starter's powerful 5000A peak current for various vehicle types.

Video 1: Demonstration of the FLYLINKTECH BD20 Car Battery Jump Starter in action.

Built-in Intelligent Air Compressor

Equipped with an intelligent air compressor, the BD20 allows for preset pressure settings and automatic shut-off, eliminating the need for constant monitoring. With 150 PSI capability, it provides fast and proper inflation for various items such as tires, kayaks, and balls. The user-friendly design includes real-time data reading, unit switching, and a removable air hose for ease of use.

Figure 3: The device's integrated 150PSI air compressor for various inflation needs.

Video 2: Overview of the FLYLINKTECH Jump Starter with Air Compressor features.

Multi-functional Fast Charge Power Station

This battery jump box features a 20000mAh battery capacity with two USB output charging ports (including one fast charge 3.0 USB output), making it compatible with almost all devices for rapid charging of mobile phones, tablets, and more. A 12V-16V/10A DC output allows for charging automotive devices via an EC5 cigarette lighter. The unit can be fully charged in 6 hours via the USB-C input port.

Figure 4: The device's capability to function as a versatile 20000mAh power bank.

Ultra-Bright LED Light

A built-in LED light offers three modes: Flashlight, Strobe, and SOS. This feature makes the portable car battery jumper starter an essential and life-saving tool for long-distance driving, outdoor adventures, emergencies, and travel.

Figure 5: The integrated LED light with Flashlight, Strobe, and SOS modes.

Intelligent Large Screen Display

The car battery charger jump starter features an eye-catching LCD intelligent display, providing real-time readings of the internal battery level, operating status, and tire pressure.

Figure 6: The intelligent LCD display showing various operational parameters.

Intelligent Safety Jumper Clamp with Screen

The patented jump pack includes a high-temperature resistant and sturdy housing for enhanced safety. It features a unique screen and a timely beep indicator that automatically initiates protection mechanisms to safeguard both the user and the battery from improper operation.

Figure 7: Overview of the intelligent safety features of the jumper clamps.

Setup

Initial Charging

Before first use, fully charge the jump starter using the provided USB-C cable. Connect the USB-C cable to the jump starter's input port and the other end to a compatible USB power adapter (not included). The LCD screen will indicate the charging progress.

Connecting Jumper Cables

Ensure the jump starter is sufficiently charged (preferably above 80%).

1. Insert the plug of the jumper cable into the jumpstart port on the device.
2. Connect the red (+) clamp to the positive (+) terminal of the car battery.
3. Connect the black (-) clamp to the negative (-) terminal of the car battery.
4. The smart clamp's screen will light up, indicating a successful connection and displaying the battery voltage.

Figure 8: Visual guide for connecting jumper cables.

Operating Instructions

Jump Starting a Vehicle

1. Ensure the jump starter is charged and connected to the car battery as described in the Setup section.
2. Start your vehicle. If the vehicle does not start immediately, wait at least 30 seconds before attempting again.
3. Once the vehicle starts, remove the jumper clamps from the car battery terminals.
4. Disconnect the jumper cable from the jump starter unit.

Using the Air Compressor

1. Screw the air hose into the designated port on the jump starter.
2. Connect the other end of the air hose to the tire valve or the item you wish to inflate. Ensure a secure connection.
3. Press the 'PUMP' button on the device. The screen will display the current pressure.
4. Use the '+' and '-' buttons to set your desired pressure.
5. Press the 'PUMP' button again to start inflation. The compressor will automatically stop once the preset pressure is reached.
6. Disconnect the air hose from the item and the jump starter.

Figure 9: Instructions for using the air compressor.

Using as a Power Bank

1. Open the protective cover on the side of the device to access the USB output ports.
2. Connect your mobile phone, tablet, or other electronic device to one of the USB output ports (USB1, USB2, or USB-C) using the appropriate charging cable.
3. The device will automatically begin charging your connected device.
4. For automotive devices, use the DC output port with the provided EC5 cigarette lighter adapter.

Figure 10: Charging electronic devices using the power bank feature.

Using the LED Light

Press and hold the light button on the side of the device to turn on the LED light. Subsequent short presses will cycle through the three modes: Flashlight (steady on), Strobe (flashing), and SOS (Morse code for emergency). Press and hold again to turn off the light.

Maintenance

• Storage: Store the jump starter in its portable EVA carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
• Charging: For optimal battery life, fully charge the unit every 3-6 months, even if not in use.
• Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Cable Care: Inspect jumper cables and clamps for any damage before each use. Replace if frayed or damaged.

Troubleshooting

• Device not turning on: Ensure the device is charged. If the battery level is too low, it may not power on.
• Vehicle not starting: Check that the jumper clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the vehicle's battery is not completely damaged beyond jump-starting capability.
• Air compressor not working: Verify the air hose is securely attached. Check the pressure setting on the display. Ensure the device has sufficient charge.
• Charging issues: Try a different USB-C cable or power adapter. Ensure the charging port is clean and free of debris.
• Error messages on display: Refer to the specific error code in the detailed user manual (PDF) for troubleshooting steps. The intelligent safety clamp provides timely beep indicators for improper operation.

Specifications

Warranty and Support

FLYLINKTECH offers a 3-YEAR FREE Warranty for your BD20 Car Battery Jump Starter. We are committed to providing excellent customer service and technical assistance.

• Customer Service: Available 7 days a week, 24 hours a day.
• Technical Support: Lifetime technical support is provided for your product.

For any inquiries or assistance, please refer to the contact information provided in your user manual or on the product packaging.