Introduction
This manual provides essential instructions for the safe and effective use of your Bestway Rectangle Solar Pool Cover. This cover is designed to harness solar energy to warm your pool water, reduce heat loss, prevent debris accumulation, and inhibit algae growth in compatible Bestway rectangular frame pools.
Safety Information
- Always keep the pool cover in a safe place when not in use to prevent damage or tripping hazards.
- Ensure the cover is securely placed on the pool surface to prevent accidental submersion or entanglement.
- WARNING: A pool cover is not a safety device. Never leave children unattended near the pool, even when covered. Adult supervision is always required.
Setup and Installation
The Bestway Rectangle Solar Pool Cover is designed for simple floating installation directly on the water surface of your rectangular above-ground pool.
- Unpack the Cover: Carefully remove the solar pool cover from its packaging.
- Unfold and Position: Gently unfold the cover and place it directly onto the surface of your pool water. Ensure the bubble side faces down into the water.
- Adjust for Fit: Allow the cover to spread across the entire water surface. If necessary, you may trim the cover with scissors to achieve a precise fit for your pool dimensions, ensuring it reaches the edges without excessive overlap.
Image: Two individuals positioning the solar pool cover over the water.
Image: Adjusting the cover to fit the pool's dimensions.
Image: The solar pool cover fully installed on the pool.
Operating Instructions
To maximize the benefits of your solar pool cover, follow these guidelines:
- Daily Use: Place the solar cover on the pool surface whenever the pool is not in use. This includes overnight and during periods of inactivity throughout the day.
- Heat Retention: The cover's design traps heat from the sun, warming the water and reducing heat loss, especially overnight.
- Debris Protection: The cover acts as a barrier, preventing leaves, dirt, and other debris from entering the pool, thereby reducing cleaning efforts.
- Algae Prevention: By blocking sunlight, the cover helps to inhibit algae growth, contributing to clearer water and potentially reducing chemical usage.
- Removal: Carefully remove the cover before using the pool. It is recommended to fold or roll the cover and store it in a shaded area to prolong its lifespan.
Image: Bestway solar pool cover in use on an above-ground pool.
Maintenance
Proper maintenance will extend the life of your Bestway Solar Pool Cover:
- Regular Cleaning: Periodically clean the cover with mild detergent and water. Rinse thoroughly to remove any soap residue.
- Drying: Ensure the cover is completely dry before folding and storing to prevent mold or mildew growth.
- Storage: When not in use for extended periods (e.g., off-season), store the cover in a cool, dry, and shaded location, away from direct sunlight and sharp objects.
Troubleshooting
This section addresses common concerns regarding your solar pool cover.
- Cover Not Heating Water: Ensure the bubble side is facing down into the water. The cover must be on the pool during sunny hours to absorb heat effectively.
- Debris Still Entering Pool: Verify the cover is properly sized and extends to the edges of the pool. Gaps can allow debris entry.
- Tears or Damage: Small tears can often be repaired with a vinyl repair kit. For significant damage, replacement may be necessary. Avoid dragging the cover over rough surfaces.
- Cover Sinking/Not Floating Properly: Ensure the cover is fully inflated with air bubbles (bubble side down). If it's waterlogged, it may indicate a leak in the bubbles.
Specifications
| Feature | Detail |
|---|---|
| Brand | Bestway |
| Model Name | 58228 |
| Item Model Number | 1058228XXX24 |
| Material | Polyethylene (PE) |
| Color | Blue |
| Shape | Rectangular |
| Installation Type | Floating |
| Compatible Pool Sizes | 6.40 m x 2.74 m (21 ft. x 9 ft.) and 7.32 m x 3.66 m (24 ft. x 12 ft.) rectangular frame pools |
| Product Dimensions (approx.) | 276.77"L x 132.28"W (7.03m x 3.36m) |
| Item Weight (approx.) | 4.36 pounds (1.98 Kilograms) |
Image: Dimensional diagram of the solar pool cover.
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please refer to the documentation included with your purchase or visit the official Bestway website. Contact information for customer service is typically available on the product packaging or the manufacturer's website.
