Introduction
The Yeedi Cube Robot Vacuum Cleaner is an advanced all-in-one cleaning solution designed to simplify your home maintenance. It features powerful vacuuming, efficient mopping, and a convenient auto-clean and auto-empty station. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Yeedi Cube to ensure optimal performance and longevity.
Image: The Yeedi Cube robot vacuum docked in its white auto-empty and auto-clean station, with a mobile app interface showing a mapped home layout.
Setup
1. Cube Station Setup
- Unpack the Cube Station and place it on a hard, flat surface against a wall, ensuring adequate space around it.
- Connect the power cord to the station and plug it into a wall outlet.
- Ensure the clean water tank and dirty water tank are correctly installed.
2. Robot Setup
- Remove all protective films and packing materials from the robot.
- Install the side brushes by pressing them onto the corresponding posts until they click into place.
- Ensure the mop pad is securely attached to the mop pad plate.
- Place the robot onto the charging pins of the Cube Station.
3. App Download and Network Setup
Download the official Yeedi app from your mobile device's app store. Follow the in-app instructions to connect your Yeedi Cube to your home Wi-Fi network. This will enable smart features, scheduling, and remote control.
4. Initial Mop Pad Installation and Water Filling
Before the first mopping session, ensure the mop pad is properly attached. Open the water tank cover on the robot and fill it with clean water. Close the cover securely.
Operating Your Yeedi Cube
The Yeedi Cube offers versatile cleaning modes to suit your needs:
- Vacuum Mode: Utilizes 5100Pa suction power for effective dry cleaning on various surfaces.
- Mop Mode: Engages the 8mm auto-lifting mop for wet cleaning, ideal for hard floors.
- Vacuum & Mop Mode: Combines both functions for comprehensive cleaning.
Smart Navigation and Obstacle Avoidance
Image: The Yeedi Cube robot vacuum intelligently navigating around furniture and objects, demonstrating its visual and laser fusion navigation system.
The robot uses visual and laser fusion navigation to map your home and efficiently clean. It is designed to avoid getting stuck and handles transitions between different floor types, including carpets, with its 8mm mop auto-lifting feature.
Image: A close-up of the Yeedi Cube robot vacuum showing its 8mm mop auto-lifting mechanism as it transitions from a hard floor to a carpet, preventing carpet wetting.
Auto-Emptying and Auto-Washing
Image: An internal view of the Yeedi Cube station showing the robot's mop being automatically scrubbed and cleaned with 10N of force, ensuring thorough cleaning of the mop pad.
The Cube Station automatically empties the robot's dustbin, storing up to 60 days of debris. It also features auto-washing and rapid hot air drying for the mop pad, ensuring it's clean and odor-free for every use.
Maintenance
Regular maintenance ensures your Yeedi Cube operates efficiently. Here are key maintenance tasks:
- Emptying and Cleaning the Dirty Water Tank: After each mopping session, remove the dirty water tank from the station and empty its contents. Rinse the tank thoroughly with clean water.
- Refilling the Clean Water Tank: Ensure the robot's internal clean water tank is refilled before each mopping cycle.
- Cleaning the Mop Pad: The station automatically washes and dries the mop pad. However, periodically remove the mop pad for deeper cleaning or replacement if heavily soiled.
- Cleaning the Dustbin and Filters: The auto-empty feature reduces manual emptying frequency. However, it is recommended to periodically check and clean the robot's internal dustbin and filters (HEPA, foam, cloth) to maintain optimal suction. Tap out dust from the filters and rinse if necessary, ensuring they are completely dry before reinstallation.
- Cleaning Side Brushes and Main Brush: Regularly check the side brushes and main brush for tangled hair or debris. Use the provided cleaning tool or scissors to cut and remove any wrapped hair.
Troubleshooting
If your Yeedi Cube encounters issues, try the following common troubleshooting steps:
- Robot Stuck: Clear any obstacles around the robot. Ensure no cables or small items are obstructing its path.
- Poor Suction: Check if the dustbin is full or if the filters are clogged. Clean or replace as needed. Ensure the main brush is free of tangled hair.
- Poor Mopping: Verify the clean water tank is filled and the mop pad is wet. Ensure the mop pad is clean and properly attached.
- Station Issues: Check power connection. Ensure water tanks are correctly inserted and the dust bag is not full.
- App Connectivity: Restart the robot and your Wi-Fi router. Ensure your phone is connected to a 2.4GHz Wi-Fi network during setup.
Specifications
| Feature | Specification |
|---|---|
| Brand | Yeedi |
| Model Name | yeedi cube |
| Special Feature | Automatic Dust Collection, Self-Emptying |
| Color | White 1 |
| Product Dimensions | 20"L x 17.95"W x 16.93"H |
| Included Components | Water Tank Plug x 1, Mopping Pad x 1, Edge Brushes x 2, yeedi cube Robotic Vacuum Cleaner x 1, Cube Station x 1 |
| Filter Type | Cloth, Cartridge, Foam |
| Battery Life | 5 years |
| Capacity | 1000 Milliliters |
| Power Source | Battery Powered |
| Compatible Devices | Amazon Echo |
| Item Weight | 38.1 pounds |
| Item model number | YDAX11 |
Warranty & Support
The Yeedi Cube Robot Vacuum Cleaner comes with a standard manufacturer's warranty. For detailed warranty information, product support, or service requests, please refer to the official Yeedi website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Important Note on Videos
Based on the provided data, no official "Seller" videos were available for direct embedding. All available videos were from "Customer" or "Influencer" creators, which do not meet the criteria for inclusion in this manual.
