ECONTROLLY D-US-TAB5305-12

User Manual for ECONTROLLY Replacement Remote Control

Compatible with Philips Soundbar Audio Speaker Systems

Introduction

This manual provides essential information for the setup, operation, and maintenance of your ECONTROLLY Replacement Infrared Remote Control. This remote is specifically designed to be compatible with various Philips Soundbar Audio Speaker System 2.1 Channel 5000 Series models, offering a seamless replacement for your original remote.

Please read this manual thoroughly before using the remote control to ensure proper functionality and to maximize your user experience.

Package Contents

1 x ECONTROLLY Replacement Infrared Remote Control

Note: AAA alkaline batteries and a user manual are not included in the package.

Setup

Battery Installation

The ECONTROLLY Replacement Remote Control requires two (2) 1.5V AAA alkaline batteries for operation. Follow these steps to install the batteries:

Locate the battery compartment on the back of the remote control.
Slide the battery compartment cover downwards or press the release tab (if present) and lift the cover to open it.
Insert two new 1.5V AAA alkaline batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Replace the battery compartment cover by sliding it back into place until it clicks securely.

Back of the remote control with the battery compartment open, showing two AAA battery slots.

Figure 1: Back of the remote control with the battery compartment open, illustrating where to insert the two AAA batteries.

Once batteries are installed, the remote control is ready for use with compatible Philips Soundbar models. No programming or pairing is required.

Operating Instructions

This remote control provides direct functionality for your compatible Philips Soundbar. Point the remote control directly at the soundbar's infrared receiver for optimal performance.

Front view of the ECONTROLLY replacement remote control, showing all buttons.

Figure 2: Front view of the remote control, displaying all functional buttons.

Key Functions

Button	Function
Power (⏻)	Turns the soundbar On or Off.
Mute (🔇)	Mutes or unmutes the sound.
Volume Up (+)	Increases the volume level.
Volume Down (-)	Decreases the volume level.
Play/Pause (⏸)	Plays or pauses audio playback.
Previous Track (⏮)	Skips to the beginning of the current track or the previous track.
Next Track (⏭)	Skips to the next track.
Pair BT (Bluetooth)	Initiates Bluetooth pairing mode for connecting devices.
HDMI (ARC)	Selects HDMI ARC as the audio input source.
EQ (Equalizer)	Cycles through available equalizer sound modes.
AUX (Auxiliary)	Selects the Auxiliary input source.
Optical	Selects the Optical input source.

Maintenance

Cleaning: Use a soft, dry cloth to clean the remote control. Avoid using abrasive cleaners or solvents, as they may damage the surface.
Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries simultaneously with new 1.5V AAA alkaline batteries.
Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store the remote in a cool, dry place.
Avoid Exposure: Do not expose the remote control to direct sunlight, heat sources, or excessive moisture.

Troubleshooting

Problem	Possible Cause / Solution
Remote control is not working.	Batteries: Check if the batteries are inserted correctly with the correct polarity (+/-). Replace old or depleted batteries with new 1.5V AAA alkaline batteries. Line of Sight: Ensure there are no obstructions between the remote control and the soundbar's infrared receiver. Distance: Make sure you are within the effective operating range of the remote control (typically up to 20 feet). Soundbar Power: Confirm that the Philips Soundbar is powered on and functioning correctly.
Remote control works intermittently.	Low Batteries: Batteries may be low. Replace them with new ones. Interference: Strong light sources (e.g., direct sunlight, fluorescent lights) or other infrared devices might interfere. Try using the remote in a different environment.

Problem

Possible Cause / Solution

Remote control is not working.

Batteries: Check if the batteries are inserted correctly with the correct polarity (+/-). Replace old or depleted batteries with new 1.5V AAA alkaline batteries.
Line of Sight: Ensure there are no obstructions between the remote control and the soundbar's infrared receiver.
Distance: Make sure you are within the effective operating range of the remote control (typically up to 20 feet).
Soundbar Power: Confirm that the Philips Soundbar is powered on and functioning correctly.

Remote control works intermittently.

Low Batteries: Batteries may be low. Replace them with new ones.
Interference: Strong light sources (e.g., direct sunlight, fluorescent lights) or other infrared devices might interfere. Try using the remote in a different environment.

Specifications

Feature	Detail
Model Number	D-US-TAB5305-12
Brand	ECONTROLLY
Product Dimensions	5.9 x 1.57 x 0.65 inches
Item Weight	3.2 ounces
Color	Black
Special Feature	Ergonomic design
Max Number of Supported Devices	18 (referring to the remote's internal capability, not necessarily 18 soundbars)
Compatible Devices	Philips Soundbar Audio Speaker Systems (Stereo System)
Power Source	2 x 1.5V AAA Alkaline Batteries (not included)

Compatible Models

This ECONTROLLY replacement remote control is compatible with the following Philips Soundbar Audio Speaker System 2.1 Channel 5000 Series models:

TAB5305
TAB5306
TAB5305/12
TAB5305/37
TAB5305/98
TAB5105/10
TAB5105
TAB5306VD
TAB5105/37
TAB5105/94
TAB5105/12
TAB5106/37
TAB5306/37

If your Philips Soundbar model is listed above, this remote control should function without any additional setup.

Warranty and Support

For any questions, concerns, or support regarding your ECONTROLLY Replacement Remote Control, please refer to the seller's contact information on the platform where the product was purchased. Specific warranty details are typically provided by the seller at the time of purchase.

Please retain your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.