1. Introduction
The CurrentBody Skin LED Light Therapy Face Mask is an advanced device designed for at-home skin rejuvenation. It combines clinically proven Red (633nm) and Near Infra-Red (830nm) light wavelengths to stimulate natural skin processes, aiming to reduce wrinkles, improve skin texture, and promote a healthier complexion. This manual provides essential information for the safe and effective use of your device.
2. Safety Information
Please read all instructions carefully before using the device. Keep this manual for future reference.
- Do not operate the device while it is plugged into a power source. The mask is designed for cordless use once fully charged.
- Always use the provided eye protection during treatment to shield your eyes from the LED light.
- Keep the device dry. Do not immerse in water or use in wet environments.
- Store the device out of reach of children.
- If you experience any discomfort or adverse reactions, discontinue use immediately and consult a healthcare professional.
3. What's Included
Your CurrentBody Skin LED Light Therapy Face Mask package includes the following components:
- LED Light Therapy Mask
- Velcro Straps
- Power Cable
- Charging Plug
- User Manual
Figure 1: The CurrentBody Skin LED Light Therapy Face Mask with its included accessories.
4. Setup
Before your first use, ensure the device is fully charged.
- Charge the Device: Connect the power cable to the mask's portable power unit, and then plug the charging plug into a wall outlet. The indicator light on the power unit will show charging status. Ensure the battery is fully charged before use.
- Attach Straps: Secure the Velcro straps to the designated loops on the mask. Adjust the straps to ensure a comfortable and snug fit around your head, allowing the mask to sit evenly on your face.
Figure 2: The flexible silicone mask is designed to conform comfortably to facial contours.
Figure 3: The portable power unit connects to the mask via a cable, providing power for cordless operation.
5. Operating Instructions
For optimal results, use the mask on clean, dry skin.
- Prepare Skin: Cleanse your face thoroughly and ensure it is dry before placing the mask.
- Wear the Mask: Place the mask on your face, ensuring the eye protection is properly positioned. Adjust the Velcro straps for a secure and comfortable fit.
- Power On: Press the power button on the portable power unit to activate the LED lights. The mask will illuminate with red and near infra-red light.
- Treatment Duration: Each session is automatically timed for 10 minutes. The device will automatically switch off once the session is complete.
- Frequency: For visible results, use the mask consistently 3 to 5 times per week.
Figure 4: The mask allows for comfortable use during relaxation or other activities.
Figure 5: The mask is embedded with 132 LED bulbs, emitting red and near-infrared light for comprehensive skin coverage.
6. Maintenance
Proper care ensures the longevity and effectiveness of your device.
- Cleaning: After each use, gently wipe the mask's surface with a clean, damp cloth. For deeper cleaning, use a cloth lightly dampened with rubbing alcohol. Ensure the device is completely dry before storing.
- Storage: Store the mask in its original packaging or a clean, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To maintain battery health, avoid completely draining the battery frequently. Recharge as needed.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mask does not turn on. | Battery is not charged or device is plugged into wall. | Ensure the portable power unit is fully charged. Disconnect the charging cable from the power unit before attempting to turn on the mask. |
| Mask does not stay in place. | Straps are too loose or improperly adjusted. | Adjust the Velcro straps to achieve a snug and secure fit around your head. The flexible silicone should conform to your face. |
| LED lights appear dim. | Low battery charge. | Recharge the portable power unit fully. |
8. Specifications
- Model: B0CDX275Q2
- Dimensions: 11.93 x 8.98 x 2.32 inches
- Weight: 2.14 Pounds
- Battery: 1 Lithium Ion battery (included)
- LED Wavelengths: Red (633nm), Near Infra-Red (830nm)
- LED Count: 132 (66 red, 66 near-infrared)
- Country of Origin: China
- Manufacturer: CurrentBody
9. Warranty and Support
For warranty information, product support, or to purchase replacement parts, please visit the official CurrentBody website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
