Yaheetech YT-00127482-001 Adjustable Swivel Bar Stools User Manual

1. Introduction

This manual provides instructions for the assembly, operation, and maintenance of your Yaheetech Adjustable Swivel Bar Stools. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Image 1.1: Yaheetech Adjustable Swivel Bar Stools (Set of 2).

Key Features:

• Ergonomic Design: Features a curved foam-padded backrest designed to support the spine's natural curve.


Image 1.2: Ergonomic backrest design for comfort.

• Comfortable Seating: Constructed with smooth PU leather and high-density foam for a soft, water-resistant, and easy-to-clean surface.

Image 1.3: Comfortable and durable seating materials.
• Stable Base: Equipped with a 16.3-inch diameter base and an anti-slip rubber ring for enhanced stability and floor protection.
• Versatile Use: Adjustable seat height from 24.6 to 32.5 inches, suitable for various counter and bar heights (35 to 43 inches).

2. Safety Information

⚠ WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov/furniture.

• Ensure all parts are present and undamaged before assembly.
• Do not stand on the stool.
• Do not exceed the maximum weight capacity of 276 pounds per stool.
• Keep children away from the assembly area. Small parts may pose a choking hazard.
• Periodically check all connections and tighten as necessary.

3. Package Contents

The package includes components for two (2) adjustable swivel bar stools. Please verify all parts are included before beginning assembly.

• 2 x Seat with Backrest (PU Leather, Light Grey)
• 2 x Gas Lift Cylinder
• 2 x Base (Chrome-plated steel)
• 2 x Footrest Ring (Chrome-plated steel)
• 2 x Base Cover
• Assembly Hardware Kit (Screws, Allen wrench)
• Instruction Manual

4. Assembly Instructions

Assembly is straightforward and typically takes about 10 minutes per stool. Follow these steps carefully:

1. Step 1: Attach the Seat to the Gas Lift. Align the mounting plate on the underside of the seat with the top of the gas lift cylinder. Secure with the provided screws and Allen wrench.
2. Step 2: Install the Footrest. Slide the footrest ring onto the gas lift cylinder. Ensure it is oriented correctly.
3. Step 3: Place the Base Cover. Slide the decorative base cover over the gas lift cylinder, resting it on the footrest.
4. Step 4: Connect to the Base. Insert the bottom of the gas lift cylinder into the central hole of the chrome base. Press down firmly to secure.
5. Step 5: Test Stability. Once assembled, gently sit on the stool to ensure all connections are secure and the stool is stable.

Image 4.1: Key components for assembly and operation.

5. Operating Instructions

Your bar stools are designed for ease of use with adjustable height and swivel functionality.

• Height Adjustment: To adjust the seat height, locate the lever under the seat.
  • To raise the seat: Lift the lever while standing beside the stool (no weight on the seat). The seat will rise automatically.
  • To lower the seat: Lift the lever while seated on the stool. The seat will lower under your weight.
  The seat height can be adjusted between 24.6 inches and 32.5 inches.
• Swivel Function: The seat is designed to swivel 360 degrees for flexible movement. Simply rotate the seat to your desired position.

Image 5.1: Stools in a kitchen counter environment.

6. Maintenance

Proper care will extend the life and appearance of your bar stools.

• Cleaning: Wipe the PU leather and chrome parts with a damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.
• Weight Capacity: Do not exceed the maximum weight capacity of 276 pounds per stool to prevent damage and ensure safety.

7. Troubleshooting

If you encounter any issues with your bar stools, refer to the following common solutions:

• Stool is wobbly:
  • Ensure all assembly screws are securely tightened.
  • Verify the gas lift cylinder is fully seated in the base.
  • Check that the floor surface is even.
• Height adjustment not working:
  • Ensure the lever is fully engaged when attempting to adjust the height.
  • Confirm that the plastic cap on the top of the gas lift cylinder (if present) was removed during assembly.
• Squeaking noise:
  • Apply a small amount of silicone lubricant to the moving parts of the gas lift mechanism, if accessible.
  • Check and tighten all screws.

8. Specifications

Image 8.1: Product Dimensions and Weight Capacity.

9. Warranty and Support

For warranty information or technical support, please contact Yaheetech customer service through their official website or the retailer where the product was purchased. Please have your model number (YT-00127482-001) and purchase date available.

You can visit the Yaheetech store for more information: Yaheetech Store