Miracase Glass Series Full-Body Magnetic Case for iPhone 15 User Manual

Introduction

Welcome to your Miracase Glass Series Full-Body Magnetic Case for iPhone 15. This manual provides instructions for installation, usage, maintenance, and troubleshooting to ensure optimal protection and functionality for your device. This case is designed specifically for the iPhone 15 (6.1 inches) and offers enhanced compatibility with MagSafe accessories, along with comprehensive 360-degree protection.

Setup and Installation

Follow these steps for a secure and bubble-free installation of your Miracase Glass Series case:

1. Remove Existing Protectors: Before installing the Miracase case, ensure you remove any other screen protectors or camera lens protectors currently on your iPhone 15.
2. Remove Protective Films: Carefully peel off all protective films from both the front frame (with the built-in screen protector) and the back casing of the Miracase case.
3. Apply Camera Lens Protector: Place the included camera lens protector precisely over your iPhone's camera lenses.
4. Insert iPhone into Back Casing: Gently slide your iPhone into the back casing of the case, ensuring the bottom of the phone is seated first, then carefully press the top into place.
5. Assemble Front and Back: Align the front frame with the back casing. Starting from the lower right corner, snap the two parts together firmly around your iPhone until they are fully sealed.

For a visual guide, please refer to the installation video below:

Visual guide for installing the Miracase iPhone 15 case, detailing the steps for attaching the camera lens protector and securing the case components.

Operating Features

MagSafe Compatibility

The Miracase Glass Series case for iPhone 15 features a built-in 3rd generation magnetic ring. This design ensures seamless compatibility with all MagSafe accessories, such as wireless chargers, magnetic wallets, battery packs, and car mounts. Your iPhone will remain securely attached, regardless of rotation or movement.

The case securely holds a MagSafe charger, illustrating its compatibility with MagSafe accessories.

Comprehensive Protection

This case provides 360-degree military-grade full-body rugged protection for your iPhone 15. It has been tested to withstand over 5000 drops. The flexible TPU materials and tri-layer structure absorb and deflect impacts from all directions. It includes a built-in 9H tempered glass screen protector with an anti-fingerprint coating and a dedicated camera lens protector. Raised bezels (1.8mm for the screen and 4.2mm for the camera lens) effectively prevent scratches from daily use.

Demonstration of the case's military-grade drop protection, showing impact absorption.

Illustration of the 9H tempered glass screen protector's durability against impacts.

Maintenance

To ensure the longevity and clarity of your Miracase Glass Series case, follow these maintenance guidelines:

• Cleaning: Regularly wipe the case with a soft, lint-free, slightly damp cloth. Avoid using abrasive materials, harsh chemicals, or solvents, as these can damage the tempered glass and TPU materials.
• Moisture Caution: Important Note: This case is not water-resistant. Even light exposure to moisture, such as splashes or rain, can allow water to enter between your phone and the case. If moisture is detected, immediately remove the case and thoroughly dry both your iPhone and the case components before reassembling. Failure to do so may result in water damage to your device.
• Avoid Extreme Temperatures: Do not expose the case to extreme heat or cold, as this can affect the material integrity and fit.

Troubleshooting

Here are solutions to common issues you might encounter:

Bubbles Under the Screen Protector

• Solution: Ensure all protective films were completely removed from both the front and back parts of the case prior to installation. Re-install the case carefully, following the steps in the Installation Guide, to minimize air bubbles. Sometimes, gently pressing out bubbles from the center outwards can help.

Phone Not Fitting Correctly / Camera Protector Interference

• Solution: Verify that no other screen protectors or camera lens protectors are installed on your iPhone before attempting to fit the Miracase. The case includes its own built-in screen and camera lens protectors. If you have an existing camera protector that causes interference, it must be removed.

MagSafe Accessories Not Attaching Securely

• Solution: Ensure the MagSafe accessory is properly aligned with the magnetic ring on the back of the case. Check for any debris or foreign objects between the case and the accessory that might weaken the magnetic connection.

Product Specifications

Warranty and Support

Miracase stands behind the quality of its products. Your Miracase Glass Series case for iPhone 15 comes with the following:

• Lifetime Warranty: A LIFETIME WARRANTY for replacement is guaranteed if any issues arise with your product.
• Manufacturer Warranty: The product is covered by a 1-Year Manufacturer Warranty.
• Customer Support: For any questions or concerns, including incorrect size, faulty products, or other order-related problems, please contact Miracase customer service 24/7 via the Amazon Message Center.