1. Introduction
Thank you for choosing the FIMEI LED Pendant Light. This modern lighting fixture features a unique Saturn ring design, offering multi-angle illumination suitable for various indoor spaces such as dining rooms, living rooms, kitchens, bedrooms, and hallways. It provides continuous dimming and adjustable color temperature from warm yellow (3000K) to cool white (6000K), controlled via both a remote and a wall switch.
Please read this manual carefully before installation and operation to ensure safe and correct use of the product. Keep this manual for future reference.
The FIMEI LED Pendant Light is designed to provide versatile lighting, adapting to different ambiances and functional needs within your home. Its innovative design allows for 330-degree rotation of the outer ring, enabling precise light direction.
2. Safety Information
- Electrical Safety: Always disconnect power at the circuit breaker before installation, maintenance, or cleaning. Ensure all wiring connections are secure and comply with local electrical codes.
- Professional Installation: If you are unsure about electrical wiring, consult a qualified electrician.
- Voltage: This product is designed for AC100-240V, 50/60 Hz. Ensure your power supply matches these requirements.
- Handling: Handle the light fixture with care to avoid damage. Do not bend or pull the cable excessively.
- Environment: Do not install in damp or outdoor environments unless specifically rated for such conditions.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
3. Package Contents
Verify that all components are present and undamaged upon opening the package. If any parts are missing or damaged, contact customer support.
- LED Pendant Light Fixture (1)
- Remote Control (1)
- Mounting Bracket (1)
- Screws and Wall Anchors (Set)
- Cable Ties (Set)
- User Manual (1)
4. Setup and Installation
Installation typically takes 20-30 minutes. Ensure power is disconnected before beginning.
- Prepare the Mounting Location: Choose a suitable ceiling location. Disconnect power to the circuit at the main breaker.
- Install Mounting Bracket: Secure the mounting bracket to the ceiling using the provided screws and wall anchors. Ensure it is firmly attached.
- Adjust Cable Length: The pendant light features an adjustable cable up to 100 cm (3.28 ft). Adjust the cable length to your desired height by pressing the cable lock mechanism on the canopy and pulling or pushing the cable.
- Wire Connections: Connect the light fixture's wires to your household electrical wires (Live, Neutral, Ground) according to standard electrical practices. Ensure all connections are tight and secure.
- Attach Fixture to Bracket: Carefully lift the light fixture and attach it to the mounting bracket, securing it with the provided screws.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
5. Operating Instructions
The FIMEI LED Pendant Light offers versatile control options to customize your lighting experience.
5.1. Wall Switch Control
You can change the light color temperature by quickly turning the wall switch ON/OFF. Each quick toggle cycles through the preset color temperatures (3000K, 4500K, 6000K).
5.2. Remote Control Operation
The remote control provides comprehensive control over the light's functions. Insert 2 AAA batteries (not included) into the remote before use.
- Power On/Off: Press the ON/OFF button to turn the light on or off.
- Brightness Adjustment: Use the brightness up/down buttons to continuously adjust the light intensity from 10% to 100%.
- Color Temperature Adjustment: Use the color temperature buttons to switch between 3000K (warm yellow), 4500K (natural warm light), and 6000K (cool white).
- Dual Control: Independently adjust the colors and brightness of the outer ring and the central light.
- Memory Function (M1/M2): Save your preferred lighting settings using the M1 or M2 buttons. The light will recall these settings when activated.
5.3. Multi-angle Illumination
The side ring of the pendant light can be rotated 330 degrees, allowing you to direct the light precisely where needed, providing multi-angle illumination.
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the light.
- Bulb Replacement: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need replacement.
- Regular Checks: Periodically check all connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Ensure all wires are securely connected. Test the wall switch. |
| Remote control not working. | Dead batteries; remote not paired; obstruction. | Replace AAA batteries (ensure they are not drained quickly, consider high-quality or rechargeable). Ensure no obstructions between remote and light. Re-pair if necessary (refer to specific pairing instructions if provided with product). |
| Light flickers or dims unexpectedly. | Unstable power supply; loose connection; incompatible dimmer (if external). | Check power supply stability. Verify wiring connections. This light is dimmable via its own remote/wall switch, do not use external dimmers unless specified. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | FIMEI |
| Model Number | J230105102 |
| Product Dimensions (L x W x H) | 31 x 31 x 4 cm (12.2 x 12.2 x 1.6 inches) |
| Item Weight | 1.57 Kilograms (3.46 lbs) |
| Material | Aluminum |
| Finish Type | Painted |
| Style | Modern / Retro |
| Power Source | Corded Electric |
| Voltage | AC100-240V |
| Frequency | 50/60 Hz |
| Wattage | 32 Watts (Rated) / 11 Watts (Actual from spec sheet) |
| Luminous Flux | 1650 Lumens |
| Color Temperature | 3000K-6000K (Adjustable) |
| Special Features | Adjustable Color Temperature, Dimmable, Remote Control, Wall Switch Control, 330° Rotatable Ring |
| Included Components | Remote Control, Wall Switch (control functionality) |
| Installation Type | Ceiling Mount |
| Energy Efficiency Class | E |
| EPREL Database Link | View EPREL Data |
9. Warranty and Support
This FIMEI LED Pendant Light comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or normal wear and tear.
For warranty claims, technical support, or any questions regarding your product, please contact FIMEI customer service through your retailer or the official FIMEI support channels. Please have your purchase receipt and model number (J230105102) ready when contacting support.