Picun V1 Gaming Earbuds User Manual

1. Introduction

The Picun V1 Gaming Earbuds are designed to provide a superior audio experience for gaming and communication. Featuring ultra-low latency, 3D stereo sound, and a clear noise-cancelling microphone, these earbuds are compatible with a wide range of devices including PCs, PlayStation consoles, Nintendo Switch, and VR headsets.

2. What's in the Box

Upon opening your Picun V1 Gaming Earbuds package, you will find the following components:

• Smart Charge Case
• Left and Right Earbuds
• USB-C Bluetooth Dongle
• USB-C to USB-A Adapter
• Charging Cable
• Three sizes of Ear Caps (Small, Medium, Large)
• User Manual

Image: All components included in the Picun V1 Gaming Earbuds package.

3. Setup

3.1 Initial Charging

Before first use, ensure the charging case and earbuds are fully charged. Place the earbuds into the charging case. Connect the charging cable to the USB-C port on the case and the other end to a USB power source. The indicator lights on the case will show charging status. Once fully charged, the lights will change color (e.g., from red/orange to blue/green) or turn off.

Image: The Picun V1 charging case displaying its indicator lights during operation or charging.

3.2 Connecting to Devices

The Picun V1 earbuds offer three wireless connection modes:

• 2.4G Wireless (via USB Dongle): For ultra-low latency gaming on PC, PS4, PS5, Switch, and VR headsets.
• Bluetooth 5.4: For general use with cellphones, tablets, and laptops.

Image: Visual representation of the three wireless connection modes available for the Picun V1 earbuds.

3.2.1 2.4G Wireless Connection

1. Insert the USB-C Bluetooth dongle directly into your device's USB-C port. If your device only has USB-A ports, use the provided USB-C to USB-A adapter.
2. Take the earbuds out of the charging case. They will automatically enter pairing mode.
3. The earbuds will automatically connect to the dongle. You should hear an audio prompt indicating successful connection.

3.2.2 Bluetooth Connection

1. Take the earbuds out of the charging case. They will automatically enter pairing mode.
2. On your device (phone, tablet, laptop), go to Bluetooth settings.
3. Search for "picun V1" in the list of available devices.
4. Select "picun V1" to connect. You should hear an audio prompt indicating successful connection.

4. Operating Instructions

4.1 Intelligent Touch Control

The Picun V1 earbuds feature intelligent touch controls on each earbud for easy management of music, calls, and game modes.

Image: Overview of the intelligent touch controls on the Picun V1 earbuds.

4.2 Sound Quality and Microphone

The Picun V1 earbuds are equipped with dual 10mm dynamic EQ driver units, producing 3D stereo surround sound. This enhances spatial awareness in games, allowing you to better pinpoint footsteps and gunshots.

Image: Detailed view of the 10mm sound driver for immersive 3D audio.

Advanced microphone technology ensures clear and high-quality communication with minimal lag, crucial for team-based gaming.

5. Maintenance

5.1 Cleaning

Regularly clean your earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry, lint-free cloth to wipe down the earbuds and charging contacts. For the ear tips, remove them and clean with mild soap and water, then ensure they are completely dry before reattaching.

5.2 Storage

When not in use, store the earbuds in their charging case to protect them from dust, damage, and to keep them charged. Avoid exposing the earbuds or case to extreme temperatures or direct sunlight for prolonged periods.

6. Troubleshooting

• Earbuds not pairing: Ensure both earbuds are out of the case and fully charged. Turn off Bluetooth on other nearby devices that might interfere. Try resetting the earbuds by placing them back in the case, closing it, and then reopening after a few seconds.
• No sound or low volume: Check the volume levels on both your device and the earbuds. Ensure the earbuds are correctly seated in your ears and that the ear tips form a good seal.
• Charging issues: Verify the charging cable is securely connected to both the case and the power source. Check if the charging port is clean and free of debris.
• Microphone not working: Ensure the earbuds are properly connected to your device. Check your device's audio input settings to confirm the earbuds' microphone is selected.

7. Specifications

8. Warranty and Support

Picun products come with a standard manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please refer to the official Picun website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.