plusOne Luxe Ripple Multi-Vibe Vibrator

Introduction

This manual provides detailed instructions for the safe and effective use of your plusOne Luxe Ripple Multi-Vibe Vibrator, Model 6760. Please read all instructions carefully before first use and retain this manual for future reference.

Safety Information

• For adult use only.
• Do not use if the device appears damaged.
• Discontinue use immediately if you experience any discomfort or pain.
• Consult a healthcare professional if you have any concerns about using this product.
• Keep out of reach of children.

Product Overview

The plusOne Luxe Ripple Multi-Vibe Vibrator is designed for versatile use, featuring a flexible shaft, multiple vibration modes, and a suction cup base for hands-free operation. It is made from body-safe silicone and is fully waterproof.

Image: The plusOne Luxe Ripple Multi-Vibe Vibrator, highlighting its soft and smooth texture, multi-vibe stimulation, power button, suction cup, and charging port.

Setup

Charging

Before first use, fully charge your device. The plusOne Luxe Ripple Multi-Vibe uses a magnetic USB charging cable. Connect the cable to the charging port located at the base of the device and plug the USB end into a compatible power source. The indicator light will show charging status.

Image: The vibrator connected to its USB charging cable, resting on a nightstand.

Image: A hand connecting the magnetic charging cable to the base of the vibrator.

Initial Cleaning

Clean the device thoroughly before its first use. Refer to the 'Maintenance' section for detailed cleaning instructions.

Operating Instructions

Power On/Off

To turn the device on or off, press and hold the power button located on the shaft for 3 seconds. The indicator light will illuminate when the device is on.

Image: A hand pressing the power button on the vibrator, with the button glowing.

Vibration Modes

Once powered on, press the power button repeatedly to cycle through the 10 distinct vibration modes. Each press will advance to the next mode. The device offers a variety of patterns for different sensations.

Image: The vibrator alongside a graphic displaying 10 different vibration patterns.

Suction Cup Use

The device features a low-profile suction cup base for hands-free use. Ensure the surface is clean, smooth, and dry. Press the base firmly onto the surface to create a vacuum seal. To release, gently lift the edge of the suction cup.

Image: A hand pressing the suction cup base of the vibrator onto a flat surface.

Maintenance

Cleaning

Clean the device before and after each use. The plusOne Luxe Ripple Multi-Vibe is fully waterproof, allowing for easy cleaning with warm water and mild soap. Rinse thoroughly and pat dry with a lint-free cloth. Do not use cleaners containing alcohol, petroleum, or acetone, as these can damage the silicone.

Image: Hands holding the vibrator under running water, demonstrating its waterproof design for cleaning.

Storage

Store the device in a clean, dry place away from direct sunlight and extreme temperatures. Avoid storing with other toys made of different materials to prevent potential damage or reactions.

Troubleshooting

• Device not turning on: Ensure the device is fully charged. Press and hold the power button for 3 seconds.
• Vibrations are weak: The battery may be low. Recharge the device.
• Suction cup not adhering: Ensure the surface is clean, smooth, and dry. Press firmly to remove air.

Specifications

Image: The vibrator held in a hand, indicating its approximate length of 7 inches and an insertable width of 1.25 inches.

Warranty and Support

For warranty information, product support, or to view additional resources, please visit the official plusOne website or contact customer service. You can also scan the QR code below for more information.

Image: The product packaging, which includes a QR code. The QR code links to https://qrcodes.pro/nlmws2 for additional usage information.