BRAIDOL Wireless HDMI Transmitter and Receiver R1B User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your BRAIDOL Wireless HDMI Transmitter and Receiver (Model R1B). This device facilitates wireless transmission of high-definition video and audio signals from a source device to a display, supporting resolutions up to 1080p with 4K decoding capabilities.

Please review this manual thoroughly before initial use to ensure correct installation and optimal performance of your device.

2. Package Contents

Verify that all the following items are included in your product package:

Wireless HDMI Receiver (1 unit)
Wireless HDMI Transmitter (1 unit)
Micro HDMI Adapter (1 unit)
Mini HDMI Adapter (1 unit)
HDMI Cable (2 units)
USB Cable (1 unit)
User Manual (1 unit)

Image showing the BRAIDOL Wireless HDMI Transmitter and Receiver, along with included accessories like HDMI cables, USB cable, and various HDMI adapters.

Image: Contents of the BRAIDOL Wireless HDMI Kit.

3. Product Overview

The BRAIDOL Wireless HDMI system comprises two main components: a Transmitter (TX) and a Receiver (RX) unit. The TX unit connects to your video source device, while the RX unit connects to your display device.

Front view of the BRAIDOL Wireless HDMI Transmitter and Receiver units, showcasing their compact design and included Mini and Micro HDMI adapters.

Image: BRAIDOL Wireless HDMI Transmitter and Receiver units with adapters.

3.1 Key Features

Plug and Play: Automatic connection established within 10 seconds of powering on.
Ultra-Low Latency: Utilizes 2.4/5GHz transmission technology for stable, near real-time signal delivery.
Extended Range: Supports wireless transmission up to 98 feet (30 meters).
High-Definition Visuals: Delivers 1080p video output with advanced 4K decoding capabilities.
Broad Compatibility: Connects to various devices including laptops, PCs, cameras, set-top boxes (STB), projectors, monitors, and televisions.

4. Setup Instructions

Follow these steps to correctly set up your BRAIDOL Wireless HDMI system:

4.1 Connecting the Receiver (RX)

Connect an HDMI cable from the Receiver unit (the unit equipped with two antennas) to an available HDMI input port on your display device (e.g., TV, projector, monitor).
Connect the provided USB power cable to the Receiver unit's power input and then to a 5V/2A power adapter (not included) or a powered USB port on your display device. Ensure the Receiver is powered on.

Diagram illustrating the connection of the BRAIDOL Wireless HDMI Receiver to a television via HDMI and to a 5V/2A power adapter.

Image: Receiver unit connected to a TV and power source.

4.2 Connecting the Transmitter (TX)

Connect the HDMI plug of the Transmitter unit (the smaller unit with a short, flexible HDMI cable) to the HDMI output port of your source device (e.g., laptop, PC, camera, STB). Utilize the provided Mini HDMI or Micro HDMI adapters if your source device requires them.
If your source device's HDMI port does not supply adequate power, or if you experience unstable performance, connect the USB power cable to the Transmitter unit's Micro USB power port and then to a 5V/2A power adapter or a powered USB port on your source device.

A laptop connected to the BRAIDOL Wireless HDMI Transmitter via its HDMI and USB-C ports, demonstrating a typical setup for signal transmission.

Image: Transmitter unit connected to a laptop.

The BRAIDOL Wireless HDMI Transmitter connected to a camera using a Micro HDMI adapter, with the receiver unit connected to a TV in the background, illustrating versatile compatibility.

Image: Transmitter connected to a camera with Micro HDMI adapter.

Important: The Transmitter (TX) is the unit without external antennas, and the Receiver (RX) is the unit with two antennas. Ensure these are connected to the correct source and display devices, respectively.

5. Operating Instructions

5.1 Initial Connection (Plug and Play)

After connecting both the Transmitter and Receiver units as detailed in the Setup section, ensure both units are powered on.
The units will automatically pair within approximately 10 seconds. The display connected to the Receiver will then show the content from your source device.

A laptop connected to the BRAIDOL Wireless HDMI Transmitter, illustrating the simple plug and play setup process.

Image: Plug and Play connection with a laptop.

5.2 Switching Display Modes (Extended/Copy)

The system supports both Extended Mode and Copy Mode for your display. To switch between these modes:

Locate the button on the top surface of the Transmitter unit.
Press this button to toggle between Extended Mode (where the display shows different content from your source device) and Copy Mode (where the display mirrors the content of your source device).

Diagram showing two laptops and a large display, illustrating how to switch between Extended Mode and Copy Mode by pressing a button on the wireless HDMI transmitter.

Image: Switching between Extended and Copy display modes.

5.3 General Usage Tips

For optimal signal strength and stability, maintain a clear line of sight between the Transmitter and Receiver units. Physical obstructions such as walls can reduce the effective transmission range.
Position both units away from strong sources of electromagnetic interference (e.g., microwaves, large motors) to prevent signal disruption.
Ensure adequate ventilation around both units, particularly the Transmitter, to prevent overheating during prolonged operation.

6. Maintenance

To ensure the longevity and optimal performance of your BRAIDOL Wireless HDMI system, adhere to the following maintenance guidelines:

Cleaning: Use a soft, dry, lint-free cloth to clean the exterior surfaces of the units. Avoid using liquid cleaners, abrasive materials, or aerosol sprays.
Storage: When the units are not in use for extended periods, store them in a cool, dry environment, away from direct sunlight and extreme temperatures.
Ventilation: Regularly check that the ventilation openings on both units are unobstructed to allow for proper airflow and prevent overheating.
Cable Care: Handle all connected HDMI and USB cables with care. Avoid sharp bends, kinks, or excessive pulling that could damage the internal wiring or connectors.

7. Troubleshooting

If you encounter any issues with your BRAIDOL Wireless HDMI system, consult the following table for common problems and their solutions:

Problem	Possible Cause	Solution
No signal or 'No Input' message on display.	Incorrect unit connection. Insufficient power to Transmitter or Receiver. Units not paired. Display input not correctly selected.	Ensure TX is connected to the source's HDMI output and RX to the display's HDMI input. Verify both units are powered by a stable 5V/2A power source if needed. Allow up to 10 seconds for automatic pairing after power-on. Manually select the correct HDMI input on your display device.
Intermittent signal, flickering, or poor video quality.	Physical obstructions between units. Exceeding maximum transmission distance. Interference from other wireless devices. Unit overheating.	Reduce obstructions; ensure a clear line of sight between TX and RX. Move units closer together (within 98 feet / 30 meters). Relocate units away from other 2.4GHz/5GHz wireless devices. Ensure proper ventilation for both units to prevent overheating.
Audio not synchronized with video.	Signal degradation. Temporary software glitch.	Check for environmental factors affecting signal (obstructions, distance, interference). Restart both the source device and the BRAIDOL HDMI units.
Transmitter unit feels excessively hot.	Normal operating temperature (some warmth is expected). Inadequate ventilation.	Ensure the unit has sufficient airflow and is not covered. If overheating persists, disconnect the unit and allow it to cool before resuming use. Consider adding external cooling if used in a confined space.

8. Specifications

Feature	Detail
Brand	BRAIDOL
Model Number	R1B
Connectivity Technology	HDMI Wireless
Wireless Frequency	2.4GHz / 5GHz
Max Resolution	1080p (with 4K decoding support)
Transmission Range	Up to 98 feet (30 meters)
Latency	Ultra-low, near real-time
Compatible Devices	Laptops, PCs, Cameras, Set-Top Boxes (STB), Projectors, Monitors, Televisions
Power Input	5V/2A (Micro USB for TX, USB-C for RX)
Product Dimensions	7.01 x 5.51 x 1.65 inches
Item Weight	13 ounces
Video Encoding	H.264, H.265/HEVC
Audio Output Mode	Stereo

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official BRAIDOL website or contact their customer service directly. Specific warranty terms and contact details are typically provided in the product packaging or the full user manual.

Additional support resources and frequently asked questions may also be available on the BRAIDOL Store on Amazon.

10. Important Notes

This product is not designed to support direct connection with smartphones.
Always ensure the Transmitter (TX) unit is connected to the signal-emitting port of your source device, and the Receiver (RX) unit is connected to the input port of your display device.
If your computer's HDMI port does not provide sufficient power, or if you experience performance issues, connect the Transmitter to an external 5V/2A power source for optimal operation.

11. Product Videos

No relevant official product videos from the seller are available at this time.

BRAIDOL R1B