ETENWOLF T300 Plus Digital Tire Pressure Gauge User Manual

Introduction

The ETENWOLF T300 Plus Digital Tire Pressure Gauge is designed for accurate and easy measurement of tire pressure across various vehicles. This manual provides essential information for proper setup, operation, and maintenance of your device.

Package Contents

Upon unboxing, please ensure all items listed below are present:

1 x ETENWOLF T300 Plus Tire Pressure Gauge
2 x AAA Batteries
1 x Presta Valve Adaptor
1 x User Manual

ETENWOLF T300 Plus Tire Pressure Gauge and included accessories: 2 AAA batteries, Presta valve adapter, and user manual.

Image: Contents of the ETENWOLF T300 Plus package.

Setup

1. Battery Installation

Locate the battery compartment cover at the rear of the device.
Slide the cover open.
Insert two AAA batteries, ensuring correct polarity (+/-).
Close the battery compartment cover securely.

Close-up of the ETENWOLF T300 Plus battery compartment showing two AAA batteries and the LED light.

Image: Battery compartment with AAA batteries.

2. Unit Selection

Press the power button to turn on the device. The display will illuminate.
Repeatedly press the power button to cycle through the available pressure units: PSI, BAR, and KPA.
Stop pressing when your desired unit is displayed. The device will remember this setting for future use.

ETENWOLF T300 Plus display showing PSI, BAR, and KPA units.

Image: Digital display showing various pressure units.

Operating Instructions

1. Power On/Off and Auto-Calibration

Press the power button once to turn on the gauge. The device will automatically calibrate, displaying '0.0' when ready.
To turn off, press and hold the power button until the display clears. The device also features an auto-off function after a period of inactivity to conserve battery.

Four panel image showing the ETENWOLF T300 Plus powering on, calibrating, becoming ready to use, and checking tire pressure.

Image: Auto-calibration process on power-on.

2. Measuring Tire Pressure (Schrader Valve)

Ensure the gauge is powered on and calibrated.
Remove the valve cap from the tire.
Firmly press the nozzle of the gauge straight onto the tire valve stem. A brief hiss may occur as the seal is made.
Hold the gauge in place until the digital display shows a stable reading.
Remove the gauge and replace the valve cap.

A hand holding the ETENWOLF T300 Plus Digital Tire Pressure Gauge against a car tire's Schrader valve, displaying a pressure reading.

Image: Measuring tire pressure on a Schrader valve.

3. Measuring Tire Pressure (Presta Valve)

Unscrew the small nut on the Presta valve stem.
Screw the provided Presta valve adapter onto the valve stem.
Firmly press the nozzle of the gauge onto the Presta valve adapter.
Hold the gauge in place until the digital display shows a stable reading.
Remove the gauge, unscrew the adapter, and tighten the small nut on the Presta valve.

Comparison image showing the ETENWOLF T300 Plus being used on both a Presta valve (with adapter) and a Schrader valve.

Image: Presta valve adapter usage.

A person using the ETENWOLF T300 Plus Digital Tire Pressure Gauge on a bicycle tire with a Presta valve adapter.

Image: Digital Tire Pressure Gauge for car and bicycle.

Video: Demonstration of the ETENWOLF T300 Plus Tire Pressure Gauge in use, showing its ease of operation and digital display.

Features

Laboratory-Tested Precision: Calibrated to ANSI B40.7 Grade 2A (±1 PSI) with 0.1 PSI increments, ensuring accurate readings.

Image detailing the accuracy grade of the ETENWOLF T300 Plus, showing it is ANSI B40.7 Grade 2A with +/- 0.5% of span.

Image: Accuracy specifications of the gauge.

Wide Pressure Range: Measures tire pressure from 3 to 200 PSI, suitable for various vehicle types including pickups, RVs, and heavy-duty vehicles.
Accurate in Extreme Weather: Equipped with a built-in AI chip and thermal compensation, the gauge operates reliably in temperatures ranging from -4°F to 130°F (-20°C to 54°C).

Image showing the ETENWOLF T300 Plus operating in both hot (130°F) and cold (-4°F) weather conditions.

Image: Performance in extreme temperatures.

Bright LED Display and Light: Features a bright LED display for clear readings and a built-in LED light to illuminate dark areas, making tire checks effortless at night or in low-light conditions.

A hand holding the ETENWOLF T300 Plus, with its LED light illuminating the tire valve area in a dark setting.

Image: LED light for dark environments.

Durable Construction: Designed to withstand bumps and drops, ensuring years of reliable service.

Video: A demonstration of the ETENWOLF T300 Plus's durability, showing it withstands being run over by a car and remains functional.

Maintenance

Battery Replacement: Replace AAA batteries when the display dims or the device fails to power on. Always use fresh batteries.
Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
Storage: Store the tire pressure gauge in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Device does not power on: Check if batteries are inserted correctly and are not depleted. Replace if necessary.
Inaccurate readings: Ensure the nozzle is firmly pressed onto the valve stem to create a tight seal. Allow the device to auto-calibrate to '0.0' before use.
Display is dim: Replace the AAA batteries.

Specifications

Feature	Specification
Brand	ETENWOLF
Model	T300 Plus
Material	Plastic
Pressure Range	3-200 PSI
Accuracy	ANSI B40.7 Grade 2A (±1 PSI)
Operating Temperature	-4°F to 130°F (-20°C to 54°C)
Power Source	2 x AAA Batteries
Item Dimensions (L x W x H)	5.91 x 1.46 x 1.22 inches
Item Weight	100 Grams

Warranty and Support

For warranty information or technical support, please contact ETENWOLF customer service:

Email: support@etenwolf.com
Phone: 1-877-828-0209
Operating Hours: Monday - Friday, 8 AM - 5 PM PST