Kajaia 12-Piece Christmas Winter Village Houses and Trees with LED Lights Instruction Manual

1. Introduction

This manual provides instructions for the Kajaia 12-Piece Christmas Winter Village Houses and Trees set. This set is designed for decorative purposes, featuring miniature houses with integrated LED lighting and accompanying miniature trees to create a festive display. Please read these instructions carefully before setup and use to ensure proper handling and enjoyment of your product.

2. Package Contents

Verify that all items listed below are present in your package:

• 12 x LED Christmas House Decorations
• 12 x Christmas Tree Decorations (in 3 assorted sizes: approximately 5.91 inches, 3.94 inches, and 1.97 inches in height)

Figure 2.1: Overview of included village houses and trees.

3. Setup

3.1 Unpacking

Carefully remove all components from the packaging. Inspect each item for any signs of damage. Retain packaging for future storage if desired.

Figure 3.1: Product packaging.

3.2 Battery Installation

Each LED house decoration requires button batteries for operation. Batteries are typically pre-installed. Before first use, locate the battery compartment on the underside of each house. Remove the plastic insulating tab if present. If batteries need replacement, ensure correct polarity (+/-) when inserting new batteries.

Figure 3.2: Battery compartment detail on a village house.

3.3 Arrangement

Arrange the houses and trees on a flat, stable surface such as a tabletop or mantelpiece. The items are designed for tabletop display. Consider using artificial snow or other decorative elements to enhance your winter village scene.

Figure 3.3: Example arrangement of the village set.

4. Operating Instructions

4.1 Turning Lights On/Off

Each LED house has an individual power switch, typically located near the battery compartment on the underside. To activate the LED lights, slide the switch to the 'ON' position. To turn off the lights, slide the switch to the 'OFF' position.

Figure 4.1: Illuminated village houses.

5. Maintenance

5.1 Cleaning

To clean the village houses and trees, use a light dusting cloth. For spot cleaning, gently wipe the affected area with a slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the painted finish.

5.2 Battery Replacement

When the LED lights dim or cease to function, it is time to replace the batteries. Open the battery compartment on the underside of the house, remove the old batteries, and insert new ones, ensuring correct polarity. Dispose of used batteries responsibly.

5.3 Storage

Store the village set in a cool, dry place away from direct sunlight when not in use. If storing for an extended period, it is recommended to remove all batteries to prevent leakage and potential damage to the electronic components.

6. Troubleshooting

• Lights not working:
  Ensure the power switch on the underside of the house is in the 'ON' position. Check if the batteries are correctly installed with the proper polarity. Replace batteries if they are depleted.
• Lights are dim:
  This typically indicates low battery power. Replace the batteries in the affected house.
• Physical damage:
  The houses are made of ABS resin and electronic components, and trees are plastic. Handle with care to prevent breakage. If a part is broken, assess if it can be safely repaired with appropriate adhesive.

7. Specifications

Figure 7.1: Approximate dimensions of village components.

8. Warranty and Support

Specific warranty information is not provided with this product. For any questions, concerns, or support needs regarding your Kajaia Christmas Winter Village set, please refer to the retailer where the product was purchased or visit the official Kajaia brand store online. You can find more information at the Kajaia Store.