Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your XTRONS 9-inch QLED Android 14 Car Stereo. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
The XTRONS IQP94TTAP is an advanced car navigation system featuring an Octa-Core processor, 8GB RAM, 256GB ROM, and a QLED 1280*800 display. It supports built-in 4G LTE, Wireless CarAutoPlay, Wireless Android Auto, DTS sound, DSP, HDMI Output, and Dual Band WiFi. It is designed for Audi TT MK2 8J (2006-2012) models.
Safety Information
Always prioritize safety. Do not operate the device in a way that distracts you from driving. Ensure all connections are secure and properly insulated to prevent short circuits or electrical hazards. Consult a professional for installation if you are unsure about any steps.
- Do not disassemble or modify the unit.
- Keep the unit away from water and excessive moisture.
- Ensure proper ventilation to prevent overheating.
- Use only specified accessories and cables.
Package Contents
Verify that all items listed below are included in your package:
- 2 x ISO Wiring Harness
- 1 x RCA Cable
- 2 x USB Cables
- 1 x GPS Antenna
- 1 x Amplifier Box for BOSE System
- 1 x CANbus Cable
- 1 x Camera Cable
- 1 x Radio Antenna Cable
- 1 x 4G+ Antenna
- 1 x 4G- Antenna
- 2 x User Manual (English/German)
Setup
Vehicle Compatibility and Installation
This unit is specifically designed for Audi TT MK2 8J models from 2006-2012. Professional installation is recommended. Ensure your vehicle's radio antenna port matches the picture provided. If not, an additional cable (XTRONS AK/INIB/NRCBL, ASIN: B082SC6G94) may be required to prevent static noise or no sound from the rear speakers.
Wiring and Connections
Connect the provided ISO wiring harness, RCA cables, USB cables, GPS antenna, camera cable, radio antenna cable, and 4G antennas according to the vehicle's wiring diagram and the included user manual. If your vehicle has a BOSE system, use the dedicated amplifier box.
Operating Instructions
Basic Operation
The unit features a responsive QLED touchscreen. Power on the device using the power button. Navigate through the Android 14 interface by tapping and swiping. Adjust volume using the dedicated controls or on-screen interface.
Smartphone Integration
The unit supports Wireless CarAutoPlay and Wireless Android Auto for seamless smartphone integration. Connect your device via Bluetooth or USB for wired connections. Screen Mirroring allows you to cast content from your smartphone to the car stereo's display.
Audio Features
Experience high-fidelity audio with the built-in DTS Digital Sound and DSP. The powerful TDA7808 amplifier chip and Si47925 intelligent audio processor chip ensure a fully digital, lossless audio output. Adjust equalizer settings, delay, volume, and frequency for optimal sound.
Connectivity
The unit features Qualcomm 4G LTE (for Asia and Europe) and Dual Band WiFi (2.4GHz and 5GHz) for internet access. It supports Micro-SIM cards for 4G data. An HD output port allows sharing content with external monitors, such as rear-seat displays.
Maintenance
To ensure the longevity and optimal performance of your XTRONS car stereo, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates to ensure the system runs efficiently and has the latest features. Information on guaranteed software updates is currently unknown.
- Heat Management: The unit features a 100% aluminum heat sink and a built-in cooling fan that auto-activates above 90°C or can be manually activated. Ensure proper airflow around the unit.
Troubleshooting
If you encounter issues with your XTRONS car stereo, refer to the following common problems and solutions:
- No Power: Check all power connections and fuses. Ensure the vehicle's ignition is on.
- No Sound or Static Noise from Rear Speakers: This may occur if your vehicle has a specific wiring configuration. You might need the XTRONS AK/INIB/NRCBL adapter (ASIN: B082SC6G94).
- Touchscreen Unresponsive: Try restarting the unit. If the issue persists, perform a factory reset (refer to the on-screen settings for this option).
- GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky.
- Bluetooth Pairing Issues: Ensure Bluetooth is enabled on both the car stereo and your device. Delete previous pairings and try reconnecting.
For more complex issues, please contact XTRONS customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | XTRONS |
| Model | IQP94TTAP |
| Applicable Vehicle Service Type | Auto |
| Connectivity Technology | RCA, Bluetooth, USB, WLAN |
| Map Type | Street |
| Mounting Type | Dashboard Mount |
| Storage Capacity | 256 GB |
| Model Year | 2006 (for vehicle compatibility) |
| Touchscreen Type | Capacitive |
| Display Type | LCD (QLED) |
| Processor | Qualcomm Snapdragon 665 Octa Core |
| RAM | 8GB |
| Operating System | Android 14 |
| Display Resolution | 1280*800 |
| Audio Output | HD Output, Optical Output, RCA Output |
| Amplifier Chip | TDA7808 (Max 4 x 45W Output) |
| Audio Processor Chip | Si47925 (DTS Decoding) |
Warranty and Support
XTRONS provides comprehensive support for this device:
- Warranty: The device is covered by a one-year warranty.
- Refund Policy: A 30-day refund option is available.
- Exchange/Repair: Beyond 30 days, exchange or repair options are available.
- Technical Support: Professional technical support is provided.
For any inquiries or technical assistance, please do not hesitate to contact XTRONS via Amazon email. We aim to respond as quickly as possible to ensure your rights and interests are protected.
