LIVINGbasics Cat Litter Box Enclosure Instruction Manual

1. Introduction

Thank you for choosing the LIVINGbasics Cat Litter Box Enclosure. This product is designed to provide a private and comfortable space for your cat's litter box, while also serving as a stylish piece of furniture in your home. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and effective use of your new enclosure.

2. Important Safety Information

Please read all instructions carefully before assembling and using this product. Keep this manual for future reference.

• Do not step or sit on the product. This enclosure is designed for pet use and light decorative items, not for human seating or standing.
• Ensure all parts are securely fastened before use. Loose parts can cause instability.
• Keep children and pets away from the assembly area to prevent injury or choking on small parts.
• Place the enclosure on a flat, stable surface to prevent tipping.
• Avoid exposing the product to excessive moisture or direct sunlight for prolonged periods to prevent damage to the wood material.
• This product is intended for indoor use only.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Wooden panels (top, bottom, sides, back, doors)
• Metal frame components
• Hardware pack (screws, dowels, magnetic locks, door handles, feet pads)
• Assembly instructions (this manual)

4. Setup and Assembly

Follow these steps to assemble your LIVINGbasics Cat Litter Box Enclosure. It is recommended to have two people for assembly.

4.1 Unpacking and Preparation

1. Open the package and carefully remove all components.
2. Lay out all parts on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
3. Identify all parts against the package contents list.

4.2 Assembly Steps

1. Assemble the Base Frame: Attach the metal frame components to the bottom wooden panel using the provided screws. Ensure they are tightly secured.
   

   This diagram illustrates the overall dimensions of the enclosure: 28.35 inches (72cm) length, 15.75 inches (40cm) width, and 18.9 inches (48cm) height. It also specifies the maximum internal space for a litter box: 25.51 inches (64.8cm) length, 13.38 inches (34cm) width, and 11.54 inches (29.3cm) height. The cat entry hole is 7.48 inches (19cm) high and 6.38 inches (16.2cm) wide.

2. Attach Side Panels: Secure the side wooden panels to the base frame and bottom panel. One side panel will have the cat entry hole.
3. Install Back Panel: Slide or screw the back panel into place, ensuring it aligns with the side and bottom panels.
4. Attach Top Panel and Upper Frame: Place the top wooden panel onto the structure and secure the remaining metal frame components to form the upper structure.
5. Install Doors: Attach the doors to the front of the enclosure using the provided hinges. Ensure they open and close smoothly.
   

   This image provides detailed views of key components: the double magnetic locks that secure the doors, the floor-friendly feet designed to protect surfaces, and the stylish door latches, showcasing the thoughtful design elements.
6. Attach Door Handles and Magnetic Locks: Install the door handles and the double magnetic locks to ensure the doors stay closed when desired.
7. Attach Feet Pads: Secure the floor-friendly feet pads to the bottom of the metal frame to protect your floors.
8. Final Check: Verify that all screws are tightened and the enclosure is stable.
   

   The image displays the assembled cat litter box enclosure in a home environment, functioning as a piece of furniture. One cat is on top, and another is resting in front, demonstrating its integration into a living space.

5. Operating Instructions

5.1 Placing the Litter Box

• Open the front doors of the enclosure.
• Place your cat's litter box inside the enclosure. Ensure the litter box dimensions do not exceed 25.51 x 13.38 x 11.54 inches (L x W x H) to allow for proper fit and cat access.
• Close the doors securely using the magnetic locks.

This image highlights the spacious interior of the enclosure, with the doors open to reveal a comfortable cat bed placed inside. This demonstrates its versatility as a private resting area for cats, or for accommodating a litter box.

5.2 Cat Access

• Your cat will access the litter box through the side entry point.
• Allow your cat time to adjust to the new setup. You may need to guide them to the entry point initially.


The image shows a cat using the side entry point of the enclosure. Below, a comparison illustrates how the enclosure helps contain litter, showing a clean area versus an area with tracked litter, emphasizing its function in reducing mess.

5.3 Dual Functionality

• The sturdy top surface can be used as a coffee table, side table, or nightstand.
• Decorate with plants, books, or other household items to seamlessly integrate it into your home decor.


The enclosure is shown integrated into a room as a functional piece of furniture, serving as a side table with decorative items placed on its top surface, illustrating its dual purpose.

6. Maintenance

Regular cleaning and care will extend the life of your cat litter box enclosure.

• Cleaning: The wooden box is waterproof and anti-scratch. Wipe down surfaces with a damp cloth and mild detergent as needed. Avoid abrasive cleaners.
• Litter Box Cleaning: Access the litter box by opening the front doors for easy scooping and cleaning.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
• Protection: The anti-scratch surface coating helps protect against cat claws. However, extreme scratching may still cause damage.

7. Troubleshooting

If you encounter any issues with your enclosure, refer to the following common problems and solutions:

• Problem: The litter box does not fit inside the enclosure.
  Solution: Verify the dimensions of your litter box against the maximum allowed internal size: 25.51 x 13.38 x 11.54 inches (L x W x H). This enclosure is suitable for small to medium cats (up to 14 pounds) and corresponding litter box sizes. A larger litter box will not fit.
• Problem: My cat is not using the enclosure.
  Solution: Cats can be sensitive to changes. Place a familiar item (like a favorite toy or blanket) inside. Ensure the litter box is clean. You may need to temporarily remove the doors or guide your cat through the side entry until they become comfortable.
• Problem: The enclosure feels wobbly after assembly.
  Solution: Recheck all screws and connections. Ensure they are fully tightened. Make sure the enclosure is placed on a completely flat and level surface.
• Problem: Doors do not close properly.
  Solution: Check the alignment of the hinges and magnetic locks. Adjust if necessary. Ensure no obstructions are preventing the doors from closing flush.

8. Specifications

9. Warranty Information

LIVINGbasics products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official LIVINGbasics website. Keep your proof of purchase for any warranty claims.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact LIVINGbasics customer support through the retailer where you purchased the product or visit the LIVINGbasics official website for contact information.

Online Resources: LIVINGbasics Store on Amazon