Hypervolt 2 Percussion Device User Manual

1. Introduction

The Hypervolt 2 is an advanced percussion device engineered to help you move better and feel better. Featuring patented QuietGlide technology and an ergonomic design, it provides a powerful yet quiet massage experience. This manual provides essential information for the safe and effective use of your Hypervolt 2.

2. What's Included

Your Hypervolt 2 package includes the following components:

• Hypervolt 2 Device
• Power Supply + Adapters (to keep your device charged no matter where you are)
• Head Attachments (5 types, to tailor the device to best suit the area you're focused on)
• Head Attachment Pouch (to keep all the attachments together and organized)

3. Setup

3.1 Charging the Device

Before first use, fully charge your Hypervolt 2. Connect the power supply to the charging port on the base of the handle. The LED band on the handle will illuminate to indicate charging status. A full charge typically takes approximately 2-3 hours.

3.2 Attaching a Head

To attach a head, simply push the desired attachment firmly into the opening on the front of the device. To remove, pull the attachment straight out. Ensure the device is off before changing attachments.

4. Operating Instructions

4.1 Powering On/Off

To power on the Hypervolt 2, press and hold the power button on the back of the device for 2 seconds. The LED band will light up. To power off, press and hold the power button again for 2 seconds.

4.2 Adjusting Speed

The Hypervolt 2 features 3 speed settings. Once powered on, press the power button briefly to cycle through the speeds (Level 1, Level 2, Level 3). The LED indicators will show the current speed setting.

4.3 Usage Guidelines

Apply the device to the desired muscle area. Use light to moderate pressure. Move the device slowly across the muscle. Do not apply excessive pressure or use on bony areas. For optimal results, use for 30-60 seconds per muscle group.

5. Attachments Guide

The Hypervolt 2 comes with five interchangeable head attachments, each designed for specific muscle groups and massage types:

• Ball: General use, large muscle groups.
• Fork: For spinal muscles, Achilles, or other narrow areas.
• Flat: Versatile, for all body parts, dense muscles.
• Bullet: Pinpoint treatment, small areas, trigger points.
• Cushion: Softer impact for sensitive areas or bony parts.

6. Maintenance

6.1 Cleaning

Wipe the device with a damp cloth or a mild disinfectant wipe. Do not immerse the device in water or any liquids. Keep the ventilation ports free of dust and debris.

6.2 Storage

Store the Hypervolt 2 in a cool, dry place, away from direct sunlight and extreme temperatures. Keep all attachments in the provided pouch.

7. Troubleshooting

• Device not turning on: Ensure the device is fully charged. Press and hold the power button for 2 seconds.
• No vibration: Check if an attachment is properly secured. Ensure the device is powered on and not in standby mode.
• Unusual noise: If the device makes an unusual noise, power it off immediately and contact customer support.
• LED indicators not working: If the LED band or speed indicators are not functioning, try restarting the device. If the issue persists, contact support.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the official Hyperice website or contact the retailer from whom you purchased the device. Keep your proof of purchase for any warranty claims.

For additional guidance and routines, you can connect your Hypervolt 2 to the Hyperice Bluetooth-enabled app (HyperSmart).