Hitachi RSQG318HGXA

Hitachi 1.5 Ton 3 Star Hot & Cold Inverter Split AC User Manual

Model: RSQG318HGXA

Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Hitachi 1.5 Ton 3 Star Hot & Cold Inverter Split AC, model RSQG318HGXA. Please read this manual thoroughly before using the air conditioner and retain it for future reference.

Setup and Installation

Unpacking and Components

Carefully unpack all components and ensure the following items are present:

  • 1 Indoor Unit
  • 1 Outdoor Unit
  • Inter Connecting Copper Pipe (3m / 9.84 ft length)
  • 1 Remote Control
  • 1 User Manual & Warranty Card
  • 2 Batteries for Remote Control

Unit Dimensions

Refer to the diagram below for the dimensions of the indoor and outdoor units to ensure proper placement and installation.

Diagram showing dimensions of Hitachi AC indoor and outdoor units with energy label.

Figure 1: Indoor and Outdoor Unit Dimensions. The indoor unit measures 96.8 cm (width) x 29.4 cm (height) x 24 cm (depth). The outdoor unit measures 75 cm (width) x 54.8 cm (height) x 28.8 cm (depth).

Installation Guidelines

This is a split-system air conditioner requiring professional installation. Ensure the installation area meets the minimum width requirement of 96 cm for the indoor unit. The copper condenser coil ensures better cooling and requires low maintenance. Always ensure proper grounding and electrical connections are made by a qualified technician.

Operating Instructions

Remote Control

The air conditioner is controlled via the provided remote control. Familiarize yourself with the buttons for power, mode selection (Cool, Heat, Fan, Dry), temperature adjustment, fan speed, and special features.

Operating Modes and Features

  • Hot & Cold Function: This AC provides both heating and cooling capabilities, making it suitable for year-round use. It operates effectively within an ambient temperature range of -15°C to 52°C.
    Diagram illustrating hot air in winters and cool air in summers for the AC.

    Figure 2: Hot & Cold Functionality. The unit delivers warm air in winters and cool air in summers, adapting to a wide range of outdoor temperatures.

  • Expandable Technology: Hitachi Expandable ACs can increase their capacity under adverse temperature conditions. This technology helps to reduce humidity levels inside the room and achieve the desired temperature more quickly.
    Image showing an AC with 'Xpandable Technology' text and a family meditating in a room.

    Figure 3: Expandable Technology. This feature allows the AC to adjust its capacity to maintain comfort even in challenging weather conditions.

  • Penta Sensor Technology: This intelligent technology utilizes an advanced microcontroller and five sensors (Room Temperature, Ambient Temperature, Compressor Protection, Defrost, Motor Overload) to optimize cooling performance in varying load conditions and protect critical components.
    Hitachi AC indoor unit with a conceptual diagram of Penta Sensor Technology components.

    Figure 4: Penta Sensor Technology. This system ensures perfect cooling in extreme summer conditions and protects the AC's vital parts.

  • Tropical Design: Engineered to perform efficiently in high ambient temperatures, this AC is designed to operate effectively up to 52°C.
    Icon indicating Tropical Design with a thermometer showing 52 degrees Celsius.

    Figure 5: Tropical Design. Ensures reliable performance even in very hot climates.

  • 100% Cooling at 43°C: The unit is capable of delivering its full cooling capacity even when the outdoor temperature reaches 43°C.
    Icon showing a sun and thermometer indicating 100% cooling at 43 degrees Celsius.

    Figure 6: 100% Cooling at 43°C. Maintains comfort during peak summer heat.

  • Silent Air: Designed for quiet operation, minimizing noise disturbance.
    Diagram illustrating silent air flow from the AC unit.

    Figure 7: Silent Air. Enjoy a peaceful environment with reduced operational noise.

  • Odour-Free Air: The AC is equipped with features to ensure the air circulated is free from unpleasant odors.
    Diagram showing air purification for odour-free air.

    Figure 8: Odour-Free Air. Promotes a fresh and clean indoor atmosphere.

Maintenance

Filter Clean Indicator

The unit features a Filter Clean Indicator that alerts you when the air filter requires cleaning. Regularly cleaning the filter is crucial for maintaining air quality and the efficiency of the AC.

Image showing a filter with a light indicating it needs cleaning.

Figure 9: Filter Clean Indicator. A visual cue for timely filter maintenance.

General Cleaning and Care

  • Air Filter: Clean the air filter regularly (e.g., every two weeks or when indicated) to ensure optimal airflow and cooling/heating performance. Refer to the detailed cleaning instructions in the included user manual.
  • Outdoor Unit: Keep the outdoor unit clear of obstructions, dust, and debris to ensure proper heat exchange.
  • Indoor Unit: Wipe the surface of the indoor unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Copper Condenser Coil: The 100% copper condenser coil is designed for durability and requires minimal maintenance. However, periodic professional inspection is recommended.
    Cross-section view of an inner grooved copper tube.

    Figure 10: 100% Inner Grooved Copper Tube. Enhances heat transfer efficiency and durability.

Troubleshooting

If you encounter any issues with your Hitachi AC, please refer to the following basic troubleshooting steps before contacting customer service.

  • AC not turning on: Check if the power cord is securely plugged in and if the circuit breaker has tripped. Ensure batteries in the remote control are functional.
  • Insufficient cooling/heating: Verify that the correct mode is selected and the temperature setting is appropriate. Clean the air filter if it is dirty. Ensure no obstructions are blocking the indoor or outdoor units.
  • Unusual noises: Minor operational sounds are normal. If you hear loud or unusual noises, turn off the unit and contact customer support.
  • Water leakage: Check if the drain hose is properly connected and not blocked. Ensure the indoor unit is installed level.

For complex issues or if troubleshooting steps do not resolve the problem, please contact Hitachi customer support.

Specifications

FeatureDetail
BrandHitachi
Model Number3100HP RSQG318HGXA
Capacity1.5 Tons
Cooling Power17400 British Thermal Units
Energy Rating3 Star (BEE 2025 guidelines)
ISEER Value3.80
Annual Energy Consumption1040.2 units
RefrigerantR-32 (Environmental Friendly)
Noise Level33 Decibels
Indoor Unit Dimensions (WxHxD)96.8 cm x 29.4 cm x 24 cm
Outdoor Unit Dimensions (WxHxD)75 cm x 54.8 cm x 28.8 cm
Indoor Unit Weight11.2 Kg
Outdoor Unit Weight34 Kg
Voltage230 Volts
Wattage1847 Watts
Compressor TypeTropical Twin Rotary Inverter
Core Material100% Copper
Filter TypePre-Filter
Control MethodRemote Control
Applicable Room Size111 to 150 sq.ft

Warranty and Support

Warranty Information

Your Hitachi AC comes with the following warranty:

  • Comprehensive Product Warranty: 5 Years
  • Compressor Warranty: 10 Years
  • PCB/Controller Warranty: 5 Years

Please retain your purchase invoice for warranty claims. The warranty is subject to terms and conditions outlined in the warranty card included with your product.

Customer Support

For any queries, service requests, or technical assistance, please contact Hitachi customer care:

  • Customer Care Number: 7567884848
  • Email: customercare@jci-hitachi.com
  • Manufacturer Address: Bosch Home Comfort India Limited, Hitachi Complex, Karannagar, Kadi. Dist. Mehsana- 382715. Gujarat. India.

Related Documents - RSQG318HGXA

Preview Hitachi Inverter-Driven Multi-Split System Heat Pump Air Conditioners Operation Manual
Operation manual for Hitachi Inverter-Driven Multi-Split System Heat Pump Air Conditioners. Includes safety, operation, maintenance, and troubleshooting instructions.
Preview Hitachi Split Air Conditioners Installation and Maintenance Manual
Comprehensive installation and maintenance guide for Hitachi Split Air Conditioners, covering safety, unit setup, refrigerant handling, electrical connections, and troubleshooting. Includes model details and operational guidelines.
Preview Hitachi Inverter-Driven Multi-Split System Heat Pump Air Conditioner Operation Manual
Operation manual for Hitachi In-the-Ceiling Inverter-Driven Multi-Split System Heat Pump Air Conditioners. Covers models RPI-0.8FSN2 through RPI-5.0FSN2, including safety guidelines, remote control operation, maintenance, and troubleshooting.
Preview Hitachi 4-Way Cassette Air Conditioners Operation Manual
User guide for Hitachi inverter-driven multi-split system air-cooled heat pump air conditioners, 4-way cassette type indoor units (models RCI-1.0FSRP to RCI-6.0FSRP). Learn about operation, maintenance, and troubleshooting.
Preview Hitachi Split Air Conditioners Installation and Maintenance Manual
This manual provides comprehensive instructions for the installation and maintenance of Hitachi Split Air Conditioners, covering safety precautions, parts identification, operational guidelines, troubleshooting, and electrical specifications. It is intended for qualified personnel.
Preview Hitachi Air Conditioner Installation and Maintenance Manual | 1.5TR-7.5TR
Comprehensive guide for installing, maintaining, and troubleshooting Hitachi split air conditioning systems (1.5TR to 7.5TR). Includes wiring diagrams, warranty, and operational best practices from Johnson Controls-Hitachi.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.