KCO L1043-BS
KCO Lighting 7-Light Linear Chandelier Instruction Manual
Model: L1043-BS
Brand: KCO
1. Introduction
Thank you for choosing the KCO Lighting Black and Gold Linear Kitchen Pendant Lighting Mid Century Modern Chandelier. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference.
1.1 Safety Information
- Always turn off the main power supply at the circuit breaker before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
- This fixture is designed for indoor use only.
2. What's in the Box
Carefully unpack all components and check against the list below. Keep packaging materials until installation is complete to ensure no parts are missing or damaged.
- Chandelier Fixture (Linear Bar with 7 Light Sockets)
- 7 Smoke Gray Glass Globes (Dia: 5.9'')
- Canopy (Dia: 5.9'')
- Extension Rods: 1 x 7.9'' (20cm), 2 x 11.8'' (30cm)
- Universal Buckle / Sloped Ceiling Adapter
- Mounting Hardware (screws, wire nuts, etc.)
- 7 Warm White Non-Dimmable Bulbs (E26 Base, 40W Max per socket) - Included as gifts
- Instruction Manual
Figure 2.1: KCO Lighting 7-Light Linear Chandelier with smoke glass globes.
3. Product Specifications
| Feature | Detail |
|---|---|
| Brand | KCO |
| Model Number | L1043-BS |
| Color | Black + Smoke Glass |
| Material | Glass, Metal |
| Style | Modern |
| Light Fixture Form | Chandelier |
| Product Dimensions (L x W x H) | 43.3'' x 13.8'' x 31.5'' (Adjustable Height) |
| Specific Uses | Indoor use only |
| Power Source | AC |
| Light Source Type | LED (Compatible) |
| Number of Light Sources | 7 |
| Voltage | 110V (UL listed wire and lamp holder) |
| Bulb Base | E26 |
| Maximum Compatible Wattage | 60 Watts per bulb |
| Item Weight | 13.8 Pounds |
| Assembly Required | Yes |
Figure 3.1: Detailed product parameters including dimensions and sloped ceiling compatibility.
4. Setup and Installation
Follow these steps for proper installation. It is recommended to have two people for installation due to the size and weight of the fixture.
4.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Carefully unpack all components and inspect for any damage.
- Identify all parts using the "What's in the Box" section.
4.2 Assembling the Fixture
- Determine Desired Height: The chandelier comes with 1 x 7.9'' and 2 x 11.8'' extension rods. You can combine these rods to achieve your desired hanging height. For higher ceilings, additional rods may be available upon request from KCO Lighting.
- Attach Rods: Screw the selected extension rods together and then attach them to the main fixture body and the canopy.
- Install Glass Globes: Carefully screw each smoke gray glass globe onto its respective E26 socket on the linear bar. Ensure they are finger-tight but do not overtighten.
Figure 4.1: Illustration of adjustable height using the provided extension rods.
Figure 4.2: Detail of the glass globe attachment to the E26 bulb socket.
4.3 Mounting the Fixture
- Install Mounting Bracket: Attach the mounting bracket to your ceiling junction box using the provided screws. Ensure it is securely fastened.
- Wire Connections: Connect the chandelier's wires to your household electrical wires.
- Connect the live (black) wire from the fixture to the live (black) wire from the junction box.
- Connect the neutral (white) wire from the fixture to the neutral (white) wire from the junction box.
- Connect the ground (green or bare copper) wire from the fixture to the ground wire from the junction box.
- Secure all connections with wire nuts.
- Secure Canopy: Carefully push the wired fixture up towards the ceiling, aligning the canopy with the mounting bracket. Secure the canopy to the mounting bracket using the provided screws or nuts.
- Sloped Ceilings: This chandelier includes a universal buckle/sloped ceiling adapter, allowing for secure installation on sloped, vaulted, or flat ceilings.
Figure 4.3: Detail of the chandelier canopy, which attaches to the ceiling.
Figure 4.4: The chandelier installed in a room with a sloped ceiling, demonstrating its adaptability.
5. Operating Instructions
Once the chandelier is fully installed and secured, you can restore power at the circuit breaker.
- Turning On/Off: Operate the chandelier using your standard wall switch.
- Bulb Replacement: The chandelier uses E26 base bulbs. The included bulbs are non-dimmable. If you wish to use dimmable functionality, you must replace the included bulbs with dimmable E26 bulbs and install a compatible dimmer switch (not included).
Figure 5.1: The chandelier with E26 base bulbs, showing the light in both off and on states.
Figure 5.2: Examples of compatible E26 base bulbs for the chandelier.
6. Maintenance and Care
Regular cleaning will help maintain the appearance and performance of your chandelier.
- Cleaning: Before cleaning, ensure the power is turned off and the fixture has cooled down. Use a soft, dry cloth to wipe the metal parts. For the glass globes, a slightly damp cloth can be used, followed by a dry cloth to prevent water spots. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: When replacing bulbs, ensure the fixture is cool and power is off. Unscrew the glass globe, then carefully unscrew the old bulb and replace it with a new E26 bulb (max 60W). Reattach the glass globe.
7. Troubleshooting
If you encounter any issues with your chandelier, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply, loose wiring, faulty bulb. | Check circuit breaker. Ensure all wire connections are secure. Replace bulb. |
| Lights flicker. | Loose bulb, incompatible dimmer switch (if applicable), unstable power. | Tighten bulbs. Ensure dimmer switch is compatible with bulbs. Consult electrician for power issues. |
| Glass globe is broken. | Accidental damage. | Contact KCO Lighting for a free replacement within the warranty period. |
If the problem persists after trying these solutions, please contact KCO Lighting customer support.
8. Warranty and Support
KCO Lighting is committed to providing high-quality products and excellent customer service.
- 3-Year Warranty: KCO Lighting offers a 3-year warranty on this product. Please contact us for free replacement if you encounter any quality issues.
- 90 Days Free Replacement: Enjoy a 90-day free replacement service. If you receive a broken globe shade, please contact us for a free replacement.
- Professional Services: If you have any problems or questions, our professional support team will provide a solution within 24 hours.
- Customization Service: Some products offer free customized service. Please feel free to contact us for consultation.
For support, please visit the KCO Lighting Store on Amazon or contact their customer service directly.
Figure 8.1: KCO Lighting's commitment to customer satisfaction and support services.