KCO Lighting Linear Globe Chandelier

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your KCO Lighting Linear Globe Chandelier, Model L1043-SG. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The KCO Lighting Linear Globe Chandelier features a brushed nickel finish with seven smoke gray glass globes, designed to provide ambient lighting in various indoor settings such as kitchen islands, dining rooms, and living areas. Its design allows for adjustable height and compatibility with sloped, vaulted, slanted, or flat ceilings.

2. Safety Information

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in electric shock or fire.

• All electrical connections must be in accordance with local codes and ordinances, National Electric Code (NEC), and ANSI/NFPA 70-1999.
• Consult a qualified electrician if you are unsure about the installation process.
• Do not install this fixture in wet or damp locations. This product is for indoor use only.
• Ensure the mounting surface can support the weight of the fixture.
• Use only the specified bulb type and wattage to avoid overheating.
• Do not touch the bulb directly with bare hands during operation or immediately after turning off, as it may be hot.

3. Package Contents

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact customer support before proceeding with installation.

• Linear Chandelier Frame with Brushed Nickel Finish
• 7 Smoke Gray Glass Globes
• Canopy (Ceiling Plate)
• Mounting Hardware (screws, wire nuts, etc.)
• Adjustable Rods (7.9"/20cm, 11.8"/30cm, 11.8"/30cm)
• E26 Base Bulbs (7 included)
• Instruction Manual

Image: Close-up of the chandelier's components, highlighting the brushed nickel finish and smoke gray glass globes.

4. Setup and Installation

Professional installation is recommended for electrical fixtures. Ensure power is disconnected before starting.

4.1 Dimensions and Adjustable Height

The chandelier's length is 43.3 inches (110 cm), and each shade is 5.9 inches (15 cm) in diameter. The fixture comes with multiple rods (7.9"/20cm, 11.8"/30cm, 11.8"/30cm) allowing for a maximum hanging height of 31.5 inches (80 cm) and a minimum height of 7.9 inches (20 cm). Additional rods can be requested from the seller if needed.

Image: Product dimensions and adjustable height options.

Image: Customizing chandelier height with included rods.

4.2 Installation Steps

1. Turn off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where you will install the fixture.
2. Prepare Mounting Plate: Attach the mounting plate to the junction box using the provided screws. Ensure it is securely fastened.
3. Assemble Rods: Determine your desired hanging height. Connect the appropriate combination of extension rods to the fixture body and the canopy. The fixture is compatible with sloped ceilings, allowing for flexible installation.
4. Wire Connections: Carefully connect the fixture's wires to the household electrical wires according to standard wiring practices (usually black to black, white to white, and ground to ground). Secure connections with wire nuts.
5. Mount Fixture: Carefully lift the fixture and secure the canopy to the mounting plate with the provided screws.
6. Install Glass Globes and Bulbs: Gently attach each smoke gray glass globe to the fixture. Insert the E26 base bulbs into the sockets.
7. Restore Power: Turn the power back on at the circuit breaker or fuse box.

5. Operating Instructions

Once installed, the KCO Lighting Linear Globe Chandelier operates like any standard light fixture controlled by a wall switch. If connected to a compatible dimmer switch and using dimmable E26 bulbs, the light output can be adjusted.

• Turning On/Off: Use your wall switch to turn the chandelier on or off.
• Dimming Function: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the brightness by operating the dimmer switch.

Image: Chandelier providing warm illumination in a kitchen.

6. Maintenance

Regular maintenance will help preserve the appearance and functionality of your chandelier.

6.1 Cleaning

• Always disconnect power before cleaning.
• Wipe the fixture with a soft, dry cloth.
• Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish or glass.
• For glass globes, a mild glass cleaner can be used, applied to a cloth first, not directly to the glass.

6.2 Bulb Replacement

• Ensure power is off and bulbs have cooled completely before attempting to replace them.
• Gently remove the glass globe by unscrewing it.
• Unscrew the old E26 bulb and replace it with a new E26 base bulb of the correct wattage (max 40W per bulb).
• Carefully reattach the glass globe.

7. Troubleshooting

If you encounter issues with your chandelier, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact KCO Lighting customer support.

Image: Information on contacting seller for replacement parts.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

This KCO Lighting product comes with a 3-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any questions, concerns, or assistance with installation, operation, or warranty claims, please contact KCO Lighting customer support. If you received a broken, damaged, or cracked glass shade, or need extra rods or bulbs, communicate with the seller via your order number for replacement.

Please refer to your purchase platform or the KCO Lighting official website for specific contact details.