User Manual: Hidden Camera & Bug Detector Pen

Product Overview

The ERYITRDK X16 Hidden Camera & Bug Detector is a multi-functional device designed to enhance your privacy and security. This ultra-portable, pen-shaped detector combines several detection capabilities to help you identify hidden cameras, listening devices, and GPS trackers. Its discreet design makes it an ideal tool for personal privacy protection in various environments.

Figure 1: ERYITRDK X16 Detector Pen and its accessories.

Key features include powerful signal detection for bugs, infrared scanning for hidden cameras, and strong magnetic detection for GPS trackers. The device is designed for ease of use with adjustable sensitivity levels and a long-lasting rechargeable battery.

Figure 2: Detailed view of the detector pen's components including LED light, Type-C interface, toggle switches, pilot lamp, charge indicator light, and function key.

Setup

1. Charging the Device

Before first use, fully charge the detector pen. The device features a built-in rechargeable battery. Use the provided USB cable to connect the detector to a power source (e.g., computer USB port, USB wall adapter).

• A full charge takes approximately 1 hour.
• The charge indicator light will provide feedback on the charging status.
• Once fully charged, the device offers up to 25 hours of continuous use or 30 days in standby mode.

Figure 3: Illustration of the detector pen's 400mAh battery capacity, 1-hour charging time, and 25-hour working time.

2. Initial Inspection

Familiarize yourself with the device components. The pen itself is functional for writing. The detection module attaches to the top. Identify the function key and indicator lights on the side of the pen.

Operating Instructions

The X16 detector pen offers three primary detection functions:

1. Wireless Signal Detection (Bug Detector)

This mode detects RF signals from wireless listening devices, hidden cameras, and other transmitting bugs within a range of 1MHz-6.5GHz.

• Activation: Press the function key to activate the device.
• Sensitivity Adjustment: The device has 5 levels of sensitivity. Adjust the sensitivity using the toggle switches to narrow down the detection area. Higher sensitivity covers a wider area, while lower sensitivity helps pinpoint the exact location of a signal source.
• Detection: Slowly sweep the area you wish to inspect. The indicator lights on the side of the pen will illuminate, and an audible alarm may sound (depending on alarm mode settings) when a signal is detected. The more lights that illuminate, the stronger the signal, indicating closer proximity to the bug.

Figure 4: Visual representation of wireless signal detection in an office environment.

2. Hidden Camera Detection (Infrared Scanning)

This function uses infrared scanning to locate hidden cameras, including pinhole cameras and those with invisible wire traps.

• Activation: Attach the detection module to the pen. Activate the infrared scanning function via the function key. The LED lights around the viewfinder will illuminate.
• Scanning: Look through the viewfinder and slowly scan the area. Hidden camera lenses will appear as bright red dots or reflections when illuminated by the infrared LEDs.
• Target Areas: Pay close attention to common hiding spots such as smoke detectors, air vents, electrical outlets, picture frames, and furniture.

Figure 5: Example of using the detector pen to find hidden cameras in a bathroom setting.

3. GPS Tracker Detection (Magnetic Detection)

This mode is specifically designed to detect strong magnetic fields, commonly used by GPS trackers for attachment to vehicles or other metal surfaces.

• Activation: Activate the magnetic detection function.
• Scanning: Move the pen close to areas where GPS trackers might be hidden, such as under vehicles, inside wheel wells, or attached to metal objects. The device will alert you with a sound or light when a strong magnetic field is detected.

Figure 6: Depiction of the magnetic detection function for GPS trackers.

Alarm Modes

The detector pen offers two alarm modes to notify you of detected signals or magnetic fields:

• Sound Alert: An audible beep will indicate detection.
• Light Alert: The indicator lights on the side of the pen will illuminate.

Refer to the user manual for specific instructions on how to switch between these alarm modes.

Figure 7: Illustration of the two available alarm modes: Sound Alert and Light Alert.

Figure 8: The detector pen can be used to protect privacy in locations such as hotels, conference rooms, bathrooms, and dressing rooms.

Figure 9: The detector can find various hidden devices including GPS tracking, watch cameras, hidden cameras, bulb cameras, socket cameras, air conditioning cameras, in-ear bugs, car charger wiretaps, USB flash drive bugs, and eavesdropping devices.

Maintenance

• Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Store the detector in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid dropping the device or subjecting it to strong impacts.
• Do not attempt to disassemble or repair the device yourself, as this will void the warranty.

Troubleshooting

Specifications

Warranty & Support

For any questions, technical assistance, or warranty claims, please contact our customer support team. We offer 24/7 customer support to ensure you have the best experience with your ERYITRDK detector pen.

Please refer to the packaging or product registration card for specific contact details or visit the official ERYITRDK website for the most up-to-date support information.