1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your KOHLER K-26368-VS Transitional Beverage Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Retain this manual for future reference.
2. Safety Information
- Always turn off the main water supply before installing or performing any maintenance on the faucet.
- Wear appropriate personal protective equipment, such as safety glasses, during installation.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any installation steps, consult a qualified plumber.
- Do not use harsh chemicals or abrasive cleaners on the faucet finish, as this may cause damage.
3. Package Contents
Verify that all components are present before beginning installation:
- KOHLER K-26368-VS Faucet Assembly (Vibrant Stainless)
- Mounting Hardware
- Supply Lines
- Installation Instructions (this manual)
Figure 1: Kohler K-26368-VS Transitional Beverage Faucet in Vibrant Stainless finish. This image displays the gooseneck spout and single lever handle, characteristic of the faucet's design.
4. Setup and Installation
This faucet is designed for deck mount installation with a single hole. Professional installation is recommended.
Required Tools (Not Included):
- Adjustable Wrench
- Phillips Head Screwdriver
- Plumber's Putty or Silicone Sealant
- Safety Glasses
Installation Steps:
- Turn Off Water Supply: Locate the main water shut-off valve and turn off the water supply to the installation area.
- Prepare Mounting Surface: Ensure the mounting hole on your sink or countertop is clean and free of debris. The faucet requires a single hole for installation.
- Install Faucet: Place the faucet body through the mounting hole. Apply plumber's putty or silicone sealant around the base of the faucet if required by local codes or for an extra seal.
- Secure Faucet: From underneath the sink, attach the mounting hardware (washer and nut) to the threaded shank of the faucet. Tighten securely with an adjustable wrench, ensuring the faucet is properly aligned.
- Connect Water Supply Lines: Connect the hot and cold water supply lines from the faucet to the corresponding water supply valves. Hand-tighten first, then use an adjustable wrench for a final quarter-turn. Do not overtighten.
- Check for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten connections slightly until they stop.
- Flush Faucet: Remove the aerator (if applicable) and turn on the faucet to flush out any debris from the lines. Run both hot and cold water for a few minutes. Reinstall the aerator.
5. Operating Instructions
The KOHLER K-26368-VS faucet features a single lever handle for controlling both water temperature and flow.
- Water Flow: Lift the handle to increase water flow. Push down to decrease or turn off the water.
- Water Temperature: Move the handle to the left for hot water and to the right for cold water. Adjust the handle position between left and right to achieve the desired temperature.
- Maximum Flow Rate: The faucet operates at a maximum flow rate of 1.5 gallons per minute (GPM).
6. Maintenance
Proper care and maintenance will ensure the lasting beauty and performance of your KOHLER faucet.
Cleaning the Finish:
- Clean the Vibrant Stainless finish with a soft, damp cloth.
- For stubborn spots, use a mild soap and water solution, then rinse thoroughly and dry with a soft cloth.
- Do not use abrasive cleaners, scouring pads, ammonia, bleach, or cleaners containing alcohol, as these can damage the finish.
Aerator Maintenance:
- If water flow decreases or becomes erratic, the aerator may be clogged.
- Unscrew the aerator from the spout.
- Rinse the aerator screen under running water to remove any debris.
- Reinstall the aerator, ensuring it is securely tightened.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator; partially closed shut-off valve; debris in supply lines. | Clean aerator; ensure shut-off valves are fully open; flush supply lines. |
| Leaks at connections | Loose connections; damaged O-rings or washers. | Tighten connections; replace O-rings or washers if damaged. |
| Water temperature issues | Incorrect handle position; issues with water heater. | Adjust handle; check water heater settings. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | KOHLER |
| Model Number | K-26368-VS |
| Finish Type | Vibrant Stainless |
| Material | Metal (Handle Material: Brass) |
| Mounting Type | Deck Mount |
| Installation Type | Single Hole |
| Number of Handles | 1 |
| Maximum Flow Rate | 1.5 Gallons Per Minute |
| Spout Design | Gooseneck |
| Spout Height | 243 Millimeters |
| Spout Reach | 5.63 Inches |
| Item Weight | 1 Pound (16 ounces) |
| Product Dimensions | 10 x 10 x 10 inches |
| Certificate Type | NSF/ANSI 61 |
9. Warranty and Support
This KOHLER faucet comes with a limited warranty. For specific warranty details, registration, or to obtain support, please refer to the warranty documentation included with your product or visit the official KOHLER website. You can also contact KOHLER customer service for assistance with parts, service, or technical questions.
KOHLER Official Website: www.kohler.com
