T-SUN RGB LED Flood Light 100W Instruction Manual

1. Introduction

The T-SUN RGB LED Flood Light 100W provides a versatile and dynamic lighting solution for both indoor and outdoor environments. Featuring 16 distinct color effects and 4 operational modes, these lights are designed to enhance various settings, from holiday decorations and parties to landscape illumination and architectural accents. This manual provides essential information for the safe and effective use of your flood lights.

2. What's in the Box

Please check the package contents upon receipt to ensure all items are present:

• 2 x T-SUN RGB LED Flood Lights (100W)
• 2 x Remote Controls
• 1 x Instruction Manual

3. Specifications

4. Safety Information

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Electrical Safety: Ensure the power supply is disconnected before installation or maintenance. Use appropriate wiring and connections for outdoor use.
• Installation: Install the flood light on a stable surface. Do not install in areas with excessive vibration or heat.
• Water Exposure: While rated IP66 waterproof, avoid submerging the light in water. Ensure all connections are secure and protected from direct water spray if not specifically designed for it.
• Temperature: Operate within the specified temperature range (-20℃ to 40℃).
• Children and Pets: Keep the product and its remote control out of reach of children and pets.
• Damage: Do not operate the light if the cable, plug, or housing is damaged. Contact customer support for assistance.

5. Setup and Installation

The T-SUN RGB LED Flood Light features a widened and thickened adjustable metal bracket for stable and easy installation. You can mount the light on various surfaces by adjusting the bracket to your desired angle.

5.1 Mounting Options

The flood light can be installed in three primary ways:

• Floor Mounting: Position the light on the ground and secure the bracket.
• Wall Mounting: Attach the bracket to a wall using appropriate screws and anchors (not included).
• Ceiling Mounting: Secure the bracket to a ceiling or overhang.

5.2 Installation Steps

1. Choose Location: Select a suitable location for your flood light, considering the desired illumination area and proximity to a power source.
2. Adjust Bracket: Loosen the screws on the side of the bracket to adjust the light's angle. Tighten the screws once the desired angle is set. The bracket allows for 180° rotation.
3. Secure Light: Using appropriate hardware for your mounting surface, securely attach the flood light's bracket.
4. Connect Power: Plug the power cord into a suitable electrical outlet. Ensure the outlet is protected for outdoor use if applicable.

6. Operating Instructions

The T-SUN RGB LED Flood Light is controlled using the included remote control. Ensure the remote has working batteries (included) and is pointed towards the light for optimal response.

6.1 Remote Control Functions

• OFF: Turns the light off.
• ON: Turns the light on.
• Brightness + / Change Speed +: Increases brightness (6 levels) or increases the speed of dynamic modes.
• Brightness - / Change Speed -: Decreases brightness (6 levels) or decreases the speed of dynamic modes.
• R, G, B, W: Selects Red, Green, Blue, or White static colors.
• Color Buttons (e.g., Orange, Purple, Cyan): Selects various preset static colors.
• FLASH: Activates a fast jump mode cycling through RGB colors.
• STROBE: Activates a strobe effect with the current color.
• FADE: Activates a slow fade mode cycling through colors.
• SMOOTH: Activates a slow gradient mode cycling through RGB colors.

6.2 Memory Function

The flood light is equipped with a memory function. When turned on again via the remote control, it will automatically resume the last color setting or mode that was active before it was turned off. No need to reset your preferred settings.

7. Key Features

7.1 RGB Color Effects and Modes

The T-SUN RGB LED Flood Light offers 16 distinct color options and 4 dynamic modes (Flash, Strobe, Fade, Smooth), allowing for diverse lighting effects to suit any occasion or mood.

7.2 IP66 Waterproof Rating

Constructed with a die-cast aluminum housing and tempered glass, this flood light is designed to withstand various weather conditions. Its IP66 rating ensures reliable operation in rain, sleet, and snow, making it suitable for both indoor and outdoor applications.

7.3 Efficient Heat Dissipation

The flood light incorporates an aluminum radiator for excellent heat dissipation, which is crucial for extending the lifespan of LED components. Additionally, its waterproof drive power with IC drive current protection further reduces the impact of current fluctuations on the lamp body, contributing to a service life of approximately 30,000 hours.

8. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your T-SUN RGB LED Flood Light.

• Cleaning: Periodically clean the glass surface and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the light is off and unplugged before cleaning.
• Inspection: Regularly inspect the power cord and plug for any signs of damage. Check the mounting bracket for tightness and corrosion.
• Storage: If storing the lights for an extended period, ensure they are clean, dry, and stored in a cool, dry place.

9. Troubleshooting

If you encounter issues with your T-SUN RGB LED Flood Light, refer to the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, please contact T-SUN customer support.

10. Warranty and Support

The T-SUN RGB LED Flood Light comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official T-SUN brand store.

For technical support, warranty claims, or any other inquiries, please visit the T-SUN Brand Store or contact our customer service team.