Introduction
This instruction manual provides detailed guidance on the setup, operation, and maintenance of your PETLIBRO Automatic Cat Feeder. Please read this manual thoroughly before using the product to ensure proper function and pet safety.
Safety Information
- Use this product indoors only.
- Keep out of reach of children and pets when not in use or during assembly.
- Do not wash the feeder base with water; wipe only with a dry cloth.
- Ensure all parts are securely locked in place during installation and operation.
- Use only dry pet food with kibble sizes ranging from 2-15mm. Do not use wet food or kibble with a diameter over 15mm.
Product Overview and Components
Package Contents
- PETLIBRO Automatic Cat Feeder (Main Unit)
- Stainless Steel Food Bowl
- Power Adapter and Cable
- Desiccant Bag
- User Manual (this document)
Product Diagram
Image: PETLIBRO Automatic Cat Feeder showing its main unit, food tank, and stainless steel bowl.
Setup
1. Unpacking and Assembly
- Carefully remove all components from the packaging.
- Attach the stainless steel food bowl to the feeder base.
- Insert the desiccant bag into its designated compartment under the lid to keep food fresh.
- Fill the food tank with dry kibble (2-15mm diameter).
- Securely close the lid by pressing down until it locks.
Image: The PETLIBRO Automatic Cat Feeder disassembled, showing the food tank, base, and bowl.
2. Power Supply
The feeder offers dual power options: AC adapter or 3 D-cell alkaline batteries (not included).
- AC Adapter: Plug the power adapter into the feeder and a wall outlet.
- Battery Power: Install 3 D-cell alkaline batteries in the battery compartment at the bottom of the feeder. This provides up to 180 days of operation and acts as a backup during power outages.
Image: PETLIBRO Automatic Cat Feeder highlighting its 180-day battery life feature.
Video: Demonstrates the dual power supply options (AC adapter and batteries) for the automatic pet feeder.
Operating Instructions
1. Setting Time and Feeding Schedule
- Unlock the control panel by pressing and holding the lock button for 3 seconds.
- Press the 'Set' button to enter time setting mode. Use '+' and '-' buttons to adjust the hour and minute. Press 'Set' again to confirm.
- Press the 'Set' button again to enter meal setting mode. The meal icon (M:1) will flash.
- Use '+' and '-' buttons to set the desired feeding time for Meal 1.
- Press 'Set' to move to portion setting (P:0). Use '+' and '-' buttons to set the number of portions (1-16) for Meal 1.
- Repeat steps 4-5 for up to 6 meals per day.
- Press and hold the lock button for 3 seconds to lock the control panel and prevent accidental changes.
Image: A visual representation of setting up a feeding schedule with multiple meals and portions per day.
Image: The feeder's button protection panel, designed to prevent unintended button presses.
Video: Demonstrates the product assembly and program setting process for the PETLIBRO Feeder, including time and meal portions.
2. Manual Feeding
To dispense food manually, press the 'Feed' button once. This will dispense one portion of food immediately.
Image: A cat eating dry food from the PETLIBRO Automatic Cat Feeder's stainless steel bowl.
Video: Instructions on how to set the DUDUPET Automatic Cat Feeder, including manual feeding.
Maintenance
1. Cleaning
- Unplug the feeder and remove any remaining food.
- Disassemble the top lid, food tank, internal rotor, and stainless steel food bowl.
- Wash the removable parts (lid, food tank, rotor, bowl) with water and mild detergent. Rinse thoroughly.
- Wipe all parts dry before reassembly.
- The feeder base cannot be washed with water. If cleaning is necessary, wipe it with a dry cloth.
Image: Detachable parts of the PETLIBRO Automatic Cat Feeder being cleaned under running water in a sink.
2. Desiccant Replacement
Replace the desiccant bag every 2-4 weeks to maintain food freshness and prevent moisture buildup.
Troubleshooting
Common Issues and Solutions
- Feeder not dispensing food: Check if the food tank is empty or if kibble is jammed. Ensure the power supply is stable.
- Indicator light: A flashing red indicator can mean low food, food stuck, or low battery levels. Address the specific issue indicated.
- Accidental button presses: Utilize the button protection panel to prevent pets from changing settings.
- Clock losing time: Some users have reported minor time discrepancies over long periods. Regularly check and adjust the time if necessary.
Image: The smart status indicator on the PETLIBRO Automatic Cat Feeder displaying alerts for low food, food stuck, and low battery.