Product Overview
The AMP Research Bedstep 2 is a strong, rugged, non-slip, and retractable bumper step designed to provide easier and safer access to your pickup truck's cargo area. It quickly flips down with a foot nudge and supports up to 300 lbs. This innovative step mounts under the rear bumper, allowing full functionality even with an open tailgate or when towing. It is proudly manufactured in the USA using global materials.
Image: The AMP Research Bedstep 2 in its deployed position, showing the textured non-slip surface.
Key Features
- Fitment: Specifically designed for 2023 Ford F-250/F-350 Super Duty Passenger Side Only.
- Durability: Engineered to support loads up to 300 lbs, ensuring robust performance.
- Maintenance-Free: Features self-lubricating bushings for reliable all-weather operation.
- Construction: Made with high-strength aluminum alloy components and precision stainless steel pivot pins for stability.
- Accessibility: Provides a faster, easier, and safer way to access your truck bed.
Setup and Installation
Installation of the Bedstep 2 requires careful attention to the provided vehicle-specific instructions. All necessary hardware is included with the product. It is crucial to read and precisely follow these instructions to ensure proper and safe installation.
What's in the Box:
- BedStep 2 assembly
- All necessary mounting hardware
- Vehicle-specific installation instructions
General Installation Notes:
- Ensure the vehicle is parked on a level surface and the engine is off.
- Refer to the detailed diagrams and step-by-step instructions in the included manual for your specific vehicle model.
- Proper torque specifications for fasteners must be followed to ensure safety and product longevity.
- Professional installation is recommended if you are not familiar with automotive modifications.
Image: Close-up view of the Bedstep 2 installed on a truck, positioned near the rear tire for easy access to the bed.
Operating Instructions
The Bedstep 2 is designed for simple and intuitive operation. It deploys and retracts with a gentle nudge of your foot.
To Deploy the Bedstep 2:
- Locate the Bedstep 2 assembly mounted under the rear bumper on the passenger side of your 2023 Ford F-250/F-350 Super Duty.
- With your foot, gently push the step outwards and downwards. The step will pivot and lock into its extended, horizontal position.
- Ensure the step is fully deployed and stable before placing your weight on it.
To Retract the Bedstep 2:
- With your foot, gently push the step upwards and inwards. The step will pivot back into its stored, vertical position under the bumper.
- Ensure the step is fully retracted and securely stowed to prevent interference during driving.
The self-lubricating bushings ensure smooth operation in various weather conditions.
Image: The Bedstep 2 shown in its deployed state, highlighting the AMP Research branding.
Maintenance
The AMP Research Bedstep 2 is designed to be largely maintenance-free due to its durable construction and self-lubricating components. However, periodic inspection and basic cleaning will help ensure its longevity and optimal performance.
- Cleaning: Clean the step surface and pivot points periodically with mild soap and water to remove dirt, mud, or road grime. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Regularly inspect all mounting hardware for tightness. Re-torque any loose fasteners according to the specifications in your installation manual.
- Pivot Points: While the bushings are self-lubricating, you may apply a small amount of silicone-based lubricant to the pivot points if you notice any stiffness in operation. Do not use oil-based lubricants as they can attract dirt.
- Damage Check: Inspect the step for any signs of damage, bending, or excessive wear. If significant damage is observed, contact customer support for assistance.
Troubleshooting
If you encounter any issues with your Bedstep 2, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Step is stiff or difficult to deploy/retract. | Accumulation of dirt/debris in pivot points; lack of lubrication. | Clean pivot points thoroughly. Apply a small amount of silicone-based lubricant to the pivot pins. |
| Step feels loose or wobbly. | Loose mounting hardware. | Inspect and re-torque all mounting bolts according to the installation manual. |
| Step does not fit vehicle as expected. | Incorrect product for vehicle model/side; installation error. | Verify product model number (75423-01A) and ensure it is for the passenger side of a 2023 Ford F-250/F-350 Super Duty. Review installation instructions carefully. Contact customer support if issues persist. |
If these troubleshooting steps do not resolve the issue, please contact AMP Research customer support for further assistance.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 75423-01A |
| Product Name | Bedstep 2 |
| Brand | AMP Research |
| Fitment | 2023 Ford F-250/F-350 Super Duty Passenger Side Only |
| Weight Limit | 300 Pounds (136 kg) |
| Material | Stainless Steel, Aluminum |
| Exterior Finish | Alloy Steel (Black) |
| Item Weight | 12.78 pounds (5.8 kg) |
| Package Dimensions | 21 x 9.5 x 7 inches (53.3 x 24.1 x 17.8 cm) |
| UPC | 815410016745 |
Warranty and Support
AMP Research provides a comprehensive warranty for the Bedstep 2 to ensure customer satisfaction and product reliability.
- Warranty Coverage: AMP Research stands behind its products with a hassle-free, comprehensive 5-year/60,000 mile warranty.
- Claim Process: For warranty claims or technical support, please contact AMP Research customer service directly. Have your proof of purchase and product model number (75423-01A) ready.
- Contact Information: Refer to the official AMP Research website or the packaging for the most current contact details.
