Jetson Arro Folding Electric Bike

Introduction

Welcome to the Jetson Arro Folding Electric Bike user manual. The Jetson Arro is designed for efficient and convenient urban travel, featuring a powerful 350-Watt motor, easy-folding mechanism, and versatile riding modes. This manual provides essential information for safe operation, assembly, maintenance, and troubleshooting to ensure you get the most out of your electric bike.

Please read this manual thoroughly before your first ride and keep it for future reference.

Safety Information

Your safety is paramount. Always adhere to the following guidelines when operating the Jetson Arro Electric Bike:

• This product is certified to UL 2849 standards by SGS, ensuring electrical safety.
• Recommended for ages 14 and older.
• Always wear a helmet and appropriate safety gear.
• Obey all local traffic laws and regulations.
• Perform a pre-ride inspection before each use, checking brakes, tires, and all connections.
• Be aware that transportation of this item is subject to hazardous materials regulations due to its battery.
• Do not operate the bike under the influence of alcohol or drugs.
• Avoid riding in adverse weather conditions or on slippery surfaces.

What's in the Box

Upon unpacking your Jetson Arro Electric Bike, please ensure all the following components are present:

• Jetson Arro Electric Bike
• Charger
• User Manual (this document)

Image: The Jetson Arro Folding Electric Bike in its complete form, ready for assembly.

Assembly and Setup

The Jetson Arro Electric Bike requires some assembly before its first use. Follow these steps carefully:

1. Unpack: Carefully remove all components from the packaging.
2. Unfold the Frame: Locate the folding mechanism on the frame and carefully unfold the bike until it locks into place. Ensure the locking mechanism is securely engaged.
3. Adjust Handlebars: Loosen the handlebar stem clamp, raise the handlebars to a comfortable height, and tighten the clamp securely.
4. Adjust Seat: Use the quick-release lever to adjust the seat post height. Ensure your feet can comfortably touch the ground when stopped. Tighten the lever firmly.


Image: Detail of the adjustable seat post, showing the range of height adjustment.

5. Inflate Tires: Check tire pressure and inflate to the recommended PSI (usually found on the tire sidewall).
6. Charge Battery: Before your first ride, fully charge the battery using the provided charger. Connect the charger to the bike's charging port and then to a power outlet. The indicator light on the charger will change when fully charged.

Image: Side profile of the Jetson Arro Electric Bike, highlighting its compact design.

Operating Instructions

Familiarize yourself with the controls and features of your Jetson Arro Electric Bike:

• Power On/Off: Locate the power button (usually on the handlebar or battery pack) and press to turn the bike on or off.
• Twist Throttle: The Jetson Arro features a twist throttle for electric propulsion. Gently twist the throttle grip to engage the 350-Watt motor and accelerate. The bike can reach speeds of up to 15.5 mph using the throttle.
• Pedal Assist: For extended range and assistance while pedaling, engage the pedal assist mode. This system provides power boosts as you cycle, allowing you to travel farther than with throttle-only use.
• Braking: The bike is equipped with dual disc brakes for reliable stopping power. Squeeze the brake levers on the handlebars to slow down or stop.
• Headlight and Tailight: The integrated headlight and tailight improve visibility. Activate them using the designated switch, typically located on the handlebars.


Image: The bright LED headlight, essential for night riding and visibility.

• Folding Mechanism: The Arro's easy-folding mechanism allows for compact storage and transport. To fold, disengage the frame and stem locking mechanisms. The bike folds down to a compact size of 28.0” (L) x 17.3” (H) x 22.8” (W).


Image: The Jetson Arro in its folded state, demonstrating its portability.

Image: A rider demonstrating the use of the Jetson Arro Electric Bike in an urban setting.

Maintenance

Regular maintenance ensures the longevity and safe operation of your Jetson Arro Electric Bike:

• Battery Care: Charge the battery regularly, even if not in use, to maintain its health. Avoid fully draining the battery. Store the bike and battery in a cool, dry place.
• Tire Pressure: Check tire pressure before each ride. Maintain the recommended PSI to ensure optimal performance and prevent flats.
• Brake Inspection: Regularly inspect brake pads and cables for wear. Ensure brakes are responsive and properly adjusted.
• Cleaning: Clean the bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
• General Check: Periodically check all nuts, bolts, and quick-release levers to ensure they are tight and secure.

Troubleshooting

Here are some common issues and their potential solutions:

If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support.

Specifications

Warranty and Support

The Jetson Arro Electric Bike comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Jetson website.

For customer support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Jetson Store:

Visit the Jetson Store on Amazon