1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GLOBE Electric 64000051 Kennedy 24-inch 4-Light Dimmable LED Integrated Track Lighting fixture. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.
The Kennedy track light features a modern contemporary design with a matte black finish and four integrated LED lights. Its rotating track heads allow for adjustable light direction, providing versatile illumination for various spaces.
Figure 1.1: Front view of the GLOBE Electric Kennedy 4-Light Track Lighting fixture.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes and ordinances, National Electric Code (NEC), and ANSI/NFPA 70-1999.
- Consult a qualified electrician if you are unsure about the installation process.
- Do not install this fixture in wet locations. Suitable for indoor use only.
- Ensure the mounting surface can support the weight of the fixture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Integrated LED lights are not replaceable. Do not attempt to remove or replace the LED components.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x GLOBE Electric Kennedy 4-Light LED Integrated Track Light Fixture
- Mounting Hardware (screws, wire nuts, etc.)
- Instruction Sheet (this document)
Figure 3.1: Example of product packaging, indicating included items.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | 64000051 |
| Dimensions (L x W x H) | 24" x 4.25" x 6.5" (60.9 cm x 10.8 cm x 16.5 cm) |
| Wattage | 22 Watts |
| Brightness | 1200 Lumens |
| Color Temperature | 3000 Kelvin (Soft White) |
| Color Rendering Index (CRI) | 80 |
| Lifespan | Up to 50,000 hours |
| Voltage | 120 Volts |
| Material | Metal |
| Finish | Matte Black |
| Installation Type | Semi Flush Mount, Hardwired |
| Dimmable | Yes (with compatible dimmer switch, not included) |
| Indoor/Outdoor Usage | Indoor |
Figure 4.1: Product dimensions for the Kennedy track light.
5. Setup and Installation
This fixture requires hardwired, semi-flush mount installation. Professional installation is recommended if you are not familiar with electrical wiring.
5.1 Pre-Installation Steps
- Turn off power: Locate the circuit breaker or fuse box and turn off the power to the junction box where you will install the fixture.
- Unpack contents: Carefully remove all components from the packaging and inspect for any damage. Retain packaging for future reference.
- Gather tools: You will need basic electrical tools such as a screwdriver, wire strippers, and electrical tape.
5.2 Mounting the Fixture
- Attach the mounting bracket to the junction box using the provided screws. Ensure the bracket is securely fastened.
- Connect the fixture's wires to the household electrical wires: connect the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Secure connections with wire nuts.
- Carefully tuck all wires into the junction box.
- Align the fixture base with the mounting bracket and secure it with the provided screws.
Figure 5.1: The integrated LED design simplifies installation.
6. Operating Instructions
After successful installation, restore power at the circuit breaker. The fixture is now ready for use.
6.1 Turning On/Off
Operate the light fixture using a standard wall switch connected to the circuit.
6.2 Dimmable Functionality
This fixture is fully dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed on the wall circuit. Follow the dimmer switch manufacturer's instructions for operation.
6.3 Adjusting Light Direction
Each of the four light heads can be rotated and angled independently. Gently adjust the heads to direct light precisely where needed. Avoid excessive force when adjusting.
Figure 6.1: Directional track heads allow for customized lighting.
Figure 6.2: The fixture provides adjustable illumination for various room settings.
7. Maintenance
The GLOBE Electric Kennedy track light is designed for minimal maintenance.
- Cleaning: Ensure power is disconnected before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- LEDs: The integrated LED lights are designed for a long lifespan and do not require bulb replacement.
8. Troubleshooting
If you experience issues with your track light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection | Check circuit breaker/fuse. Ensure all wire connections are secure. |
| Light flickers or dims inconsistently | Incompatible dimmer switch Loose wiring | Ensure a compatible LED dimmer switch is used. Check all wiring connections. |
| Buzzing sound from fixture | Incompatible dimmer switch | Some dimmer switches may cause buzzing with integrated LEDs. Try a different, high-quality LED-compatible dimmer. |
If troubleshooting steps do not resolve the issue, contact customer support.
9. Warranty and Support
This product is sold without an explicit warranty. For specific details regarding returns or defects, please refer to your retailer's policy or contact GLOBE Electric customer support.
9.1 Customer Support
For further assistance or inquiries, please visit the official GLOBE Electric store or contact their customer service department. You can find more information and contact details on their website or through your purchase platform.
Online Store: Visit the GLOBE Store on Amazon
