Arlec Remote SS3136 Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your Arlec Remote SS3136. This remote control is specifically designed to operate the Arlec Wall Fan AWDC001HA, offering convenient and effortless control over your fan's functions. Please read this manual thoroughly before first use to ensure optimal performance and longevity of your device.

2. Product Features

• Easy Control: Utilizes Infrared technology for seamless communication with your Arlec Wall Fan AWDC001HA from up to 10 meters away.
• Long-Lasting Power: Requires 3 alkaline batteries for extended use.
• Sleek Design: Finished in a sophisticated black color.
• Versatile Compatibility: Designed to control Arlec Wall Fans, specifically model AWDC001HA.
• Simple Operation: Features 3 intuitive buttons for easy fan control.

3. Package Contents

Verify that all items are present in the package:

• 1 x Arlec Remote SS3136
• 1 x Wall Mount Holder
• 2 x Mounting Screws
• 2 x Wall Plugs

Image: Arlec Remote SS3136 shown with its included wall mount holder, two mounting screws, and two wall plugs, indicating the complete package contents.

4. Setup

4.1 Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Open the battery compartment cover.
3. Insert 3 Alkaline batteries (not included) into the compartment, ensuring the correct polarity (+ and -) as indicated inside the compartment. The remote requires 3 Volts (DC).
4. Close the battery compartment cover securely.

4.2 Wall Mount Installation (Optional)

1. Choose a suitable location on a wall for the remote holder.
2. Mark the positions for the two mounting screws using the holder as a template.
3. Drill pilot holes at the marked positions. Insert the wall plugs if drilling into drywall or masonry.
4. Secure the wall mount holder to the wall using the provided screws.
5. Place the remote control into the installed holder for convenient storage.

5. Operating Instructions

The Arlec Remote SS3136 features a simple 3-button layout for controlling your Arlec Wall Fan AWDC001HA. Ensure there is a clear line of sight between the remote and the fan's infrared receiver for optimal performance.

Image: Close-up view of the Arlec Remote SS3136, highlighting its three main control buttons: ON/OFF, Speed, and Timer.

• ON/OFF Button: Press this button to turn the fan on or off.
• Speed Button: Use this button to cycle through the available fan speed settings (e.g., Low, Medium, High).
• Timer Button: Press this button to set or adjust the fan's timer function. Refer to your Arlec Wall Fan AWDC001HA manual for specific timer intervals.

The remote operates using Infrared (IR) technology. Point the remote directly towards the fan's IR receiver. The effective operating range is up to 10 meters (approximately 33 feet).

6. Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the remote's performance degrades or it stops responding. Always replace all 3 batteries at the same time with new alkaline batteries.
• Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage. Store in a cool, dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your Arlec Wall Fan AWDC001HA or contact Arlec customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the manufacturer's official website or contact their customer support line.