Fixwal Side Table Instruction Manual

1. Introduction

Thank you for choosing the Fixwal Side Table. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new side table. Please read these instructions carefully before assembly and retain them for future reference.

Image 1.1: The Fixwal Side Table, fully assembled and in use.

2. Safety Information

• Weight Capacity: Do not exceed the maximum weight recommendation of 35 pounds (16 kg) on the table. Overloading may cause damage or injury.
• Placement: Place the table on a flat, stable, and level surface to prevent tipping.
• Children and Pets: Keep small parts away from children and pets during assembly. Ensure the table is stable before allowing children near it.
• Sharp Objects: Avoid placing sharp or heavy objects on the edges of the table to prevent damage or instability.
• Heat Sources: Do not place the table near open flames, heaters, or direct sunlight for prolonged periods, as this may cause material degradation.

Image 2.1: Key features including anti-slip foot pads for stability.

Image 2.2: Detail of the table's rounded edges for safety.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Top Panel (1)
• Bottom Panel (1)
• Upper Legs (4)
• Lower Legs / Feet (4)

4. Assembly Instructions

The Fixwal Side Table features a no-tool assembly design. Simply twist the legs into the designated holes.

Image 4.1: Example of a screw-in leg for easy assembly.

Assembly Steps:

1. Attach Upper Legs to Top Panel: Carefully align the threaded end of each of the four upper legs with the corresponding holes on the underside of the top panel. Twist each leg clockwise until it is securely tightened. Do not overtighten.
2. Attach Bottom Panel: Align the holes on the bottom panel with the exposed threaded ends of the upper legs. Twist the bottom panel clockwise onto the legs until it is securely fastened.
3. Attach Lower Legs (Feet): Align the threaded end of each of the four lower legs with the corresponding holes on the underside of the bottom panel. Twist each leg clockwise until it is securely tightened. These act as the table's feet.
4. Final Check: Gently lift and shake the assembled table to ensure all connections are secure and the table is stable.

5. Operating Instructions

The Fixwal Side Table is designed for versatile use in various indoor settings.

• Placement: Position the table in your desired location, ensuring it is on a stable, level surface.
• Load Capacity: Place items on the table, ensuring the total weight does not exceed 35 pounds (16 kg). Distribute weight evenly.
• Functionality: Utilize the two-tier design for organized storage of items such as books, remote controls, small plants, or decorative pieces.

6. Maintenance and Care

Proper care will extend the life and appearance of your Fixwal Side Table.

• Cleaning: Wipe the table with a damp cloth to remove dust and spills. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: The table features a smooth, waterproof coating. Promptly wipe up any spills to prevent staining or water damage.
• Inspection: Periodically check all leg connections to ensure they remain tight. Retighten if necessary.
• Avoid Extreme Conditions: Do not expose the table to extreme temperatures or humidity fluctuations.

Image 6.1: The table's smooth surface allows for easy cleaning of spills.

7. Troubleshooting

If you encounter any issues with your Fixwal Side Table, please refer to the following common solutions:

• Table is Wobbly: Ensure all legs are fully and securely tightened. Check that the table is placed on a level surface. Adjust the position if necessary.
• Scratches on Floor: The table is equipped with non-slip rubber pads on the lower legs. Ensure these pads are intact and properly positioned to protect your floor.
• Difficulty Assembling: Verify that you are using the correct legs for each position (upper vs. lower) and that they are aligned properly before twisting. Do not force components.

8. Specifications

Image 8.1: Detailed dimensions of the Fixwal Side Table.

9. Warranty and Support

Fixwal stands behind the quality of its products. For specific warranty information or if you require assistance with your side table, please contact Fixwal customer support through the retailer where you purchased the product or visit the official Fixwal website.

Contact Information: Refer to your purchase documentation or the retailer's website for the most current customer support contact details.