ENUOSUMA Digital Alarm Clock with Wireless Charging, Model TS-3001 User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your ENUOSUMA Digital Alarm Clock with Wireless Charging, Model TS-3001. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

2. Package Contents

Please check the package contents upon unboxing:

• ENUOSUMA Digital Alarm Clock (TS-3001)
• Power Adapter (USB cable and wall adapter)
• User Manual

3. Product Overview

The ENUOSUMA TS-3001 is a versatile digital alarm clock featuring a large LED mirror display, wireless charging, a USB charging port, RGB night light, dual alarms, and adjustable brightness.

Figure 1: ENUOSUMA Digital Alarm Clock (TS-3001) with a smartphone wirelessly charging on its base. The clock displays "2:00".

Key Features:

• 15W Fast Wireless Charging
• USB Charging Port for additional devices
• Large LED Mirror Surface Display
• 10 Modes RGB Night Light with 4 adjustable brightness settings
• Dual Alarms with Snooze Function (5-60 minutes)
• 6 Levels of Display Brightness Dimmer (0%-100%)
• Memory Function (CR2032 battery backup)
• 12/24H Time Display Mode

4. Setup

4.1 Initial Power On

1. Connect the provided power adapter to the DC IN port on the back of the alarm clock.
2. Plug the power adapter into a standard wall outlet. The clock display will illuminate.

4.2 Removing Protective Films

Before first use, ensure you remove the protective film from the display surface and the plastic paper from the CR2032 battery compartment (if applicable) to ensure full functionality and clear display.

Figure 2: Illustration showing the removal of the protective film from the clock's mirror display and the plastic tab from the battery compartment.

5. Operating Instructions

5.1 Setting Time and 12/24H Mode

Refer to the specific buttons on your device (usually labeled "TIME SET" or similar) to enter time setting mode. Use the "+" and "-" buttons to adjust hours and minutes. A dedicated button (often "MODE" or "12/24H") allows switching between 12-hour and 24-hour display formats.

5.2 Setting Dual Alarms

The clock supports two independent alarms. Locate the "ALARM 1" and "ALARM 2" buttons. Press and hold an alarm button to enter its setting mode. Use the "+" and "-" buttons to set the desired wake-up time. Press the alarm button again to confirm and activate the alarm. An alarm icon will appear on the display when active.

Figure 3: Image illustrating the dual alarm feature with set times of 7:30 and 8:00, and the snooze button for 5-60 minutes of extra sleep.

5.3 Snooze Function

When an alarm sounds, press the large "SNOOZE/LIGHT" button on the top of the clock to temporarily silence the alarm. The snooze duration can typically be set between 5 to 60 minutes (refer to your device's specific settings for adjustment). The alarm will sound again after the snooze period.

5.4 Wireless Charging

The clock features a 15W fast wireless charging pad on its base. Place your Qi-enabled smartphone centrally on the charging pad. The charging indicator on your phone or the clock (if available) will confirm charging has begun. Ensure proper alignment for optimal charging efficiency.

Figure 4: Diagram illustrating the wireless charging compatibility for iPhone, Samsung Galaxy/Note, other Qi-certified smartphones, and USB charging for earbuds or watches.

5.5 USB Charging Port

A USB charging port is located on the back of the clock. Use this port to charge other electronic devices such as a second phone, tablet, or smartwatch using their respective USB cables.

5.6 RGB Night Light

The clock base features an RGB night light with 10 modes, including 7 solid colors (blue, light blue, green, yellow, red, purple, white) and 3 dynamic ambient light effects. Press the "LIGHT" button (often combined with Snooze) to cycle through the light modes and adjust brightness (4 levels).

Figure 5: Visual representation of the 10 optional RGB night light modes, including static colors and dynamic flowing effects, with 4 levels of brightness adjustment.

5.7 Display Brightness Adjustment

The LED display brightness can be adjusted to 6 levels (0%-100%). Use the dedicated dimmer button (or a combination of buttons) to cycle through the brightness settings to find a comfortable level for your environment, especially at night.

Figure 6: Graphic illustrating the 6-level brightness adjustment for the clock's LED display, ranging from OFF to 100% intensity.

5.8 Mirror Function

The large LED display surface also functions as a mirror, which can be used for daily tasks such as makeup application.

Figure 7: A woman using the ENUOSUMA alarm clock's reflective display surface as a makeup mirror on a desk.

6. Maintenance

To ensure the longevity and optimal performance of your alarm clock:

• Cleaning: Wipe the display and body with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or solvents.
• Placement: Place the clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
• Power: Use only the provided power adapter.
• Battery Backup: The built-in CR2032 battery maintains time and alarm settings during power outages. Replace it if settings are lost frequently during power interruptions.

7. Troubleshooting

8. Specifications

9. Warranty and Support

ENUOSUMA provides a 365-day warranty for this product. For any questions or support needs, please contact ENUOSUMA customer service via the platform where you purchased the product. Please have your model number (TS-3001) and purchase details ready.