AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Safety Information

Read all safety warnings, instructions, illustrations, and specifications provided with this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Always wear eye protection when working with batteries.
• Do not operate the jump starter if it is damaged.
• Keep the jump starter away from children.
• Do not expose the product to rain or wet conditions.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Store the device in a cool, dry place away from direct sunlight.

2. Package Contents

Verify that all items are present in your package:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart Jumper Cable
• 1 x USB-A to USB-C Cable
• 1 x Carrying Bag
• 1 x Pump Tube
• 3 x Air Nozzles
• 1 x User Manual

3. Product Overview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Key features include:

• 3000A Peak Current: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI Air Compressor: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Power Bank Functionality: USB-A output and USB-C input for charging electronic devices.

4. Setup

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Operating Instructions

5.1. Jump Starting a Vehicle

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Connect the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Using the Air Compressor

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Use the '+' and '-' buttons to set the target pressure.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Power Bank Functionality

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• The device will begin charging automatically.

5.4. LED Flashlight

The 400-lumen LED light offers multiple modes for different situations.

• Press the lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Hold the lamp switch button to turn off the light.

6. Maintenance

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Clean the device with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store in a cool, dry place. Avoid extreme temperatures.

7. Troubleshooting

• Device not turning on: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Vehicle not starting: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Air compressor not inflating: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Specifications

9. Official Product Videos

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX website. Keep your purchase receipt for warranty claims.