CIRCOOTER R3

CIRCOOTER R3 Electric Scooter User Manual

Model: R3

1. Safety Information

Before operating the CIRCOOTER R3 Electric Scooter, please read this manual thoroughly to ensure safe usage and prevent injury or damage. Always wear a helmet and appropriate safety gear. Observe local traffic laws and regulations.

  • Do not ride in heavy rain or through puddles deeper than 2 cm.
  • Avoid riding on slippery surfaces, ice, or snow.
  • Maintain a safe distance from other vehicles and pedestrians.
  • Do not perform stunts or sudden maneuvers.
  • Ensure all components are securely fastened before each ride.
  • The maximum load capacity is 200 kg. Do not exceed this limit.

2. Product Overview

The CIRCOOTER R3 is a powerful electric scooter designed for adults, featuring a robust 800W motor, 10-inch all-terrain tires, and a dual suspension system for a comfortable ride. It includes smart app connectivity and multiple riding modes.

CIRCOOTER R3 Electric Scooter overview with two scooters and riders

Figure 2.1: Overview of the CIRCOOTER R3 Electric Scooter.

3. Setup and Assembly

3.1 Unfolding the Scooter

The CIRCOOTER R3 comes pre-assembled in a folded state. To unfold:

  1. Place the scooter on a flat surface.
  2. Locate the folding mechanism latch near the base of the handlebar stem.
  3. Release the latch and carefully lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is fully engaged.
  4. Adjust the handlebar height if applicable and secure it.
CIRCOOTER R3 Electric Scooter in folded position

Figure 3.1: The scooter in its folded configuration, ready for unfolding.

3.2 Initial Charging

Before first use, fully charge the scooter's battery. The scooter features two charging ports for faster charging.

  • Connect the charger(s) to the charging port(s) on the scooter.
  • Plug the charger(s) into a power outlet.
  • A single charger takes approximately 7-8 hours for a full charge. Using two chargers reduces the charging time to 4-5 hours.
  • The indicator light on the charger will change from red to green when charging is complete.
CIRCOOTER R3 Electric Scooter with battery and charging information

Figure 3.2: Battery specifications and charging time for the R3 scooter.

3.3 App Connection

Download the 'Circooter' app from your smartphone's app store to unlock additional features and controls.

  1. Ensure your scooter is powered on and Bluetooth is enabled on your smartphone.
  2. Open the Circooter app and follow the on-screen instructions to pair with your scooter.
  3. The app allows you to customize speed, lock/unlock the scooter, control lights, view riding records, and perform diagnostics.
CIRCOOTER R3 Electric Scooter handlebar with LCD display and smartphone app interface

Figure 3.3: The intelligent LCD display and Circooter smartphone application for scooter control.

4. Operating Instructions

4.1 Power On/Off

Press and hold the power button on the handlebar display to turn the scooter on or off.

4.2 Riding Modes

The CIRCOOTER R3 offers four distinct riding modes to suit various conditions and preferences:

  • Walk Mode: For low-speed assistance when walking alongside the scooter.
  • ECO Mode: Energy-saving mode for extended range and gentle acceleration.
  • Drive Smooth Mode: Balanced mode for comfortable daily commuting.
  • Turbo Mode: Maximum power and speed for challenging terrains or spirited riding.

Switch between modes using the dedicated button on the handlebar or via the Circooter app.

Three images showing riders in ECO Mode, Drive Smooth Mode, and Sport Mode

Figure 4.1: Illustration of the three primary ride modes: ECO, Drive Smooth, and Sport (Turbo).

4.3 Lighting System

The scooter is equipped with a 360-degree lighting system for enhanced visibility and safety, including dual headlights, side moon lights, front and rear turn signals, and brake lights.

  • Activate headlights and other lights using the controls on the handlebar or through the app.
  • Use the turn signal controls on the handlebar to indicate turns.
CIRCOOTER R3 Electric Scooter with illuminated deck lights and turn signal controls

Figure 4.2: The scooter's wide deck, special cold light system, and turn signal controls.

4.4 Braking System

The R3 features a quadruple mechanical disc brake system combined with dual electric brakes (EBS) for reliable stopping power and improved safety.

  • Apply the brake levers on the handlebar to engage the mechanical disc brakes.
  • The electric braking system activates automatically upon lever engagement, providing additional stopping force.
CIRCOOTER R3 Electric Scooter showing front and rear shock absorbers and disc brakes

Figure 4.3: The scooter's dual suspension and braking system for a comfortable and safe ride.

4.5 Off-Road Riding

With 10-inch all-terrain tires and a powerful motor, the R3 is capable of handling various challenging surfaces. The scooter has a climbing ability of 25-30%.

  • Always assess terrain conditions before riding off-road.
  • Use Turbo Mode for optimal performance on inclines and rough paths.
  • Maintain a firm grip on the handlebars and be prepared for uneven surfaces.
Person riding CIRCOOTER R3 Electric Scooter off-road, demonstrating its all-terrain capability

Figure 4.4: The CIRCOOTER R3 designed for off-road riding experiences.

5. Maintenance

5.1 General Cleaning

Regularly clean your scooter with a damp cloth. Avoid using high-pressure water jets or harsh chemicals that could damage electronic components or paintwork.

5.2 Tire Care

Check tire pressure regularly. Proper tire pressure ensures optimal performance, range, and safety. Inspect tires for wear and tear, and replace them if necessary.

5.3 Battery Care

To prolong battery life:

  • Avoid fully discharging the battery frequently.
  • Charge the battery regularly, even if the scooter is not in use for extended periods (e.g., once a month).
  • Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
Diagram showing the internal battery compartment of the CIRCOOTER R3 Electric Scooter

Figure 5.1: Internal view of the scooter's battery system.

5.4 Brake Adjustment

Periodically check the brake levers and cables for proper tension and responsiveness. Adjust as needed or consult a professional for brake maintenance.

Diagram showing the scooter's suspension system with springs

Figure 5.2: The scooter's dual suspension system, which should be inspected periodically.

6. Troubleshooting

This section addresses common issues you might encounter with your CIRCOOTER R3.

ProblemPossible CauseSolution
Scooter does not power onLow battery; Loose connections; Power button malfunctionCharge the battery fully; Check all visible connections; Contact support if issue persists.
App cannot connect to scooterBluetooth off; Scooter not powered on; App errorEnsure scooter is on and Bluetooth is active on phone; Restart app and scooter; Re-pair device in app settings.
Reduced speed or rangeLow battery; Overload; Tire pressure; Riding modeCharge battery; Ensure rider weight is within limits; Check and adjust tire pressure; Switch to a higher performance riding mode (e.g., Turbo).
Brakes feel weakBrake pads worn; Cable tension; Disc damageInspect brake pads and discs; Adjust brake cable tension; Consult a professional for repair or replacement.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support.

7. Specifications

Detailed technical specifications for the CIRCOOTER R3 Electric Scooter.

FeatureSpecification
ModelR3
Motor Power800W Brushless Hub Motor
Battery48V 15Ah Lithium Battery
Max Speed25 km/h (limited)
Max RangeUp to 40 km
Charging Time4-5 hours (with 2 chargers), 7-8 hours (with 1 charger)
Max Load Capacity200 kg
Tires10-inch All-Terrain Pneumatic
SuspensionDual Front and Rear Shock Absorbers
Braking SystemQuadruple Mechanical Disc Brakes + Dual Electric Brakes (EBS)
Climbing Ability25-30%
Frame MaterialUltra-high Strength Aluminum Alloy
Product Dimensions (L x W x H)129 x 67 x 118 cm
Product Weight27 kg
Special FeaturesSmart App Control, LCD Display, 360-degree Lighting System, Foldable Design
Diagram showing the 800W motor, 25km/h max speed, and 25-30% climbing ability of the CIRCOOTER R3

Figure 7.1: Key performance specifications including motor power, speed, and climbing grade.

8. Warranty and Support

8.1 Warranty Information

The CIRCOOTER R3 Electric Scooter comes with a limited warranty. Different parts of the scooter may have varying warranty periods:

  • Main components: 1-year warranty.
  • Specific parts: 180-day warranty.

Please refer to the official warranty policy provided with your purchase for detailed terms and conditions. Keep your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact CIRCOOTER customer service. We provide 24-hour support to assist you.

You can also refer to the official user manual in PDF format for more detailed information: Download PDF Manual

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.