SCS Sentinel SAL0059 Wireless Alarm System User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SCS Sentinel SAL0059 Wireless Alarm System. This system is designed to provide optimal security for your home through its Wi-Fi and 4G GSM connectivity, ensuring reliable detection and alerts.

The complete kit includes an alarm control unit with keypad, a wired indoor siren, a motion detector, an opening sensor, two remote controls, and two RFID badges. Each component is engineered for maximum reliability and effective detection of suspicious activity.

2. System Components

The SCS Sentinel SAL0059 alarm system includes the following components:

• Alarm Control Unit with Keypad: The central hub for managing your alarm system.
• Wired Indoor Siren: Provides a loud audible alert (105 dB) upon alarm activation.
• Wireless Motion Detector: Detects movement within its coverage area (110° viewing angle, up to 8 meters detection distance).
• Wireless Opening Sensor: Detects the opening of doors or windows.
• Remote Controls (x2): For convenient arming and disarming of the system.
• RFID Badges (x2): For quick and easy system disarming.

Image 2.1: All components of the SCS Sentinel SAL0059 Wireless Alarm System, including the control unit, siren, motion detector, opening sensor, remote controls, and RFID badges.

3. Setup and Installation

3.1 Unpacking and Initial Power-Up

1. Carefully unpack all components from the packaging.
2. Connect the alarm control unit to a power outlet using the provided adapter.
3. Ensure the wired indoor siren is connected to the control unit as per the wiring diagram in the separate installation guide.

3.2 Application Installation and System Pairing

The system requires the use of the iSCS application for full functionality. This application is currently available only in France, Italy, and Spain.

1. Download the iSCS application from your smartphone's app store.
2. Follow the in-app instructions to create an account and pair your alarm control unit with your Wi-Fi network.
3. Pair the wireless motion detector, opening sensor, remote controls, and RFID badges with the control unit via the iSCS app or the control unit's keypad. Refer to the specific pairing instructions for each accessory.

3.3 Component Placement

• Motion Detector: Install in corners of rooms, ensuring a clear line of sight to the area you wish to protect. Avoid direct sunlight or heat sources.
• Opening Sensor: Mount on doors and windows, ensuring the two parts are aligned and within 1 cm of each other when the door/window is closed.
• The alarm control unit has an open field range of 80 meters for accessories. Consider this when placing wireless components.

Image 3.1: The packaging of the SCS Sentinel SAL0059 Wireless Alarm System, illustrating key features and components.

4. Operating the System

4.1 Arming and Disarming

• Keypad: Enter your user code on the control unit's keypad to arm or disarm the system.
• Remote Control: Use the dedicated buttons on the remote control to arm (full or partial) or disarm the system.
• iSCS Application: Arm or disarm the system remotely via the iSCS smartphone application.
• RFID Badge: Present an authorized RFID badge to the designated reader on the control unit to disarm the system quickly.

4.2 Alarm Activation and Notifications

When a sensor is triggered while the system is armed, the following actions will occur:

• The wired indoor siren will activate, emitting a loud 105 dB sound.
• The alarm control unit will send notifications via Wi-Fi (through the iSCS app) and/or 4G GSM (SMS/calls, depending on configuration and SIM card presence).

5. Maintenance

5.1 Battery Replacement

The wireless components (motion detector, opening sensor, remote controls) are powered by Alkaline batteries. When a battery is low, the system will typically indicate this via the control unit or the iSCS app.

• To replace batteries, carefully open the casing of the respective component.
• Remove the old batteries and insert new ones of the correct type (Alkaline, as specified in the component's individual manual), observing polarity.
• Close the casing securely.

5.2 Cleaning

Clean the surfaces of the control unit and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic components.

6. Troubleshooting

If you encounter issues with your SCS Sentinel SAL0059 alarm system, consider the following general troubleshooting steps:

• System Not Responding: Check the power supply to the control unit. Ensure all cables are securely connected.
• Wireless Sensor Not Detecting: Verify that the sensor's batteries are not depleted. Check the sensor's placement and ensure it is within the effective range of the control unit (80 meters open field). Re-pair the sensor if necessary.
• No App Notifications: Ensure your control unit is properly connected to your Wi-Fi network and has a stable internet connection. Check your smartphone's notification settings for the iSCS app. If using GSM, ensure a valid SIM card with credit is installed and has network coverage.
• Siren Not Activating: Check the wired connection between the siren and the control unit. Ensure the siren is powered.

For persistent issues, refer to the detailed troubleshooting section in the full product manual or contact technical support.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

The SCS Sentinel SAL0059 Wireless Alarm System comes with a 2-year warranty, ensuring quality and durability. Please retain your proof of purchase for warranty claims.

8.2 Technical Support

Our technical support team, based in France, is available to assist you with the installation and use of your product. For personalized advice and assistance, please contact our support services. Your satisfaction is our highest priority.

Contact details for technical support can be found on the official SCS Sentinel website or in the separate warranty documentation included with your product.