Introduction
The 8Bitdo Bluetooth Retro Receiver allows you to connect modern Bluetooth controllers wirelessly to your classic PlayStation 1, PlayStation 2, and Windows 10/11 systems. This device enhances your retro gaming experience by providing a virtually lag-free connection and supporting controller vibration.
Image: A front view of the 8Bitdo Bluetooth Retro Receiver, showcasing its compact design and the 8Bitdo logo.
Package Contents
- 1 x 8Bitdo Bluetooth Retro Receiver
- 1 x USB-C Cable (for firmware updates)
Image: The product packaging for the 8Bitdo Bluetooth Retro Receiver, showing the device and its branding.
Setup
- Connect the Receiver: Insert the 8Bitdo Bluetooth Retro Receiver into an available controller port on your PlayStation 1 or PlayStation 2 console. For Windows, connect the receiver via the USB-C cable to your PC.
Image: The 8Bitdo Retro Receiver plugged into the controller port of a PlayStation 2 console, with a modern PS5 controller in the foreground.
- Activate Pairing Mode on Receiver: Press the small red button located on the side of the 8Bitdo Retro Receiver. The LED indicator on the receiver will begin to flash, indicating it is in pairing mode.
Image: A close-up side view of the 8Bitdo Retro Receiver, highlighting the USB-C port and the small red pairing button.
- Activate Pairing Mode on Controller: Put your desired Bluetooth controller into its pairing mode. Refer to your controller's manual for specific instructions on how to do this (e.g., holding down a dedicated pairing button).
Image: Hands holding a PS4 controller, positioned near a PlayStation 1 console with the 8Bitdo Retro Receiver plugged in, demonstrating controller pairing.
- Confirm Connection: Once the controller and receiver successfully pair, the LED indicator on the receiver will turn solid, and your controller's indicator lights will confirm a stable connection. You are now ready to play.
Operating
After successful pairing, your Bluetooth controller will function as a standard controller for your PlayStation 1, PlayStation 2, or Windows system. The receiver supports controller vibration, providing haptic feedback during gameplay where applicable.
The connection is designed to be virtually lag-free, ensuring a responsive gaming experience. Button mapping will generally align with standard PlayStation controller layouts, with modern controller buttons adapting to the classic system's inputs.
Compatibility
System Compatibility:
- PlayStation 1 (PS1)
- PlayStation 2 (PS2)
- Windows 10/11
Controller Compatibility:
- Xbox One, Xbox Series X|S, and Xbox Elite controllers
- PlayStation 4 (PS4) and PlayStation 5 (PS5) controllers (DualShock 4, DualSense, DualSense Edge)
- Wii U Pro and Nintendo Switch Pro controllers
- Partial 8BitDo Bluetooth Controllers and Arcade Stick (Note: Not compatible with 8BitDo NEOGEO Controller and Arcade Stick for Xbox)
Image: An overhead view showcasing multiple modern game controllers (Xbox, PlayStation, Switch Pro) alongside two 8Bitdo Retro Receivers, illustrating broad compatibility.
Maintenance
To ensure optimal performance and compatibility with the latest controllers, it is recommended to regularly check for and install firmware updates for your 8Bitdo Bluetooth Retro Receiver. Firmware updates can be downloaded from the official 8Bitdo website.
The USB-C port on the receiver is exclusively used for firmware updates. Connect the receiver to a computer using the provided USB-C cable to perform updates.
Troubleshooting
- Controller not pairing:
- Ensure both the receiver and controller are in pairing mode.
- Verify the controller is within the supported compatibility list.
- Try unplugging and re-plugging the receiver into the console.
- Ensure the receiver's firmware is up to date.
- Input lag or dropped connections:
- Ensure there are no significant obstructions between the controller and the receiver.
- Minimize interference from other wireless devices.
- Update the receiver's firmware to the latest version.
- Vibration not working:
- Confirm that the game you are playing supports vibration feedback.
- Ensure your controller's vibration function is enabled.
- Check for any available firmware updates for the receiver.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 6922621504467 |
| Item Weight | 1.06 ounces |
| Manufacturer | 8Bitdo |
| Connectivity | Bluetooth |
| Firmware Update Port | USB-C |
Warranty & Support
For warranty information, technical support, and the latest firmware updates, please visit the official 8Bitdo website. You can also find additional resources and FAQs there.
Official 8Bitdo Store: Visit the 8Bitdo Store on Amazon