Towallmark Commercial Ice Maker 90 LBS/24H Instruction Manual

1. Introduction

Thank you for choosing the Towallmark Commercial Ice Maker. This appliance is designed for efficient and reliable ice production, capable of producing up to 90 pounds of ice per day with a storage capacity of 33 pounds. It features a smart LCD control panel for easy operation and an automatic self-cleaning function for convenient maintenance. Please read this manual thoroughly before installation, operation, and maintenance to ensure safe and optimal performance.

Image 1.1: The Towallmark Commercial Ice Maker, highlighting its 90 lbs/24H rapid ice making capability, 33 lbs storage, 230W energy efficiency, and automatic overflow prevention.

2. Safety Instructions

To prevent injury to users or property damage, ensure all safety precautions are followed. Keep this manual for future reference.

• Always connect the ice maker to a grounded power outlet with the correct voltage (115 volts).
• Do not operate the appliance with a damaged power cord or plug.
• Keep the ice maker away from heat sources and direct sunlight.
• Ensure adequate ventilation around the unit. Do not block air vents.
• Do not immerse the appliance, cord, or plug in water or other liquids.
• Unplug the ice maker before cleaning, maintenance, or if it will not be used for an extended period.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Keep children away from the appliance.
• Use only potable water for ice production.
• Ensure the unit remains upright for at least 24 hours before initial use after transport.

3. Product Overview and Components

Familiarize yourself with the main components of your Towallmark Commercial Ice Maker.

Included Components:

• Commercial Ice Maker Unit
• Water Filter
• Water Inlet Pipe
• Water Outlet Pipe (Drain Hose)
• Ice Scoop

Image 3.1: The ice maker unit shown with its accessories: an ice scoop, water inlet pipe, and drain hose.

Control Panel:

The intuitive LCD control panel allows for easy management of ice production and cleaning functions.

Image 3.2: Top shows the multi-function LCD control panel for adjusting ice thickness. Bottom shows the simple back-end interface with drain and water filter connections.

4. Setup Instructions

4.1 Unpacking and Placement

1. Carefully remove all packaging materials.
2. Place the ice maker on a flat, stable, and level surface. Ensure there is sufficient space around the unit for proper ventilation (at least 5 inches from walls).
3. Allow the unit to stand upright for at least 24 hours before plugging it in. This allows the refrigerant to settle.

Image 4.1: The ice maker is designed to be stable and compact, fitting nicely under a counter.

4.2 Water Connection

The ice maker is equipped with a water filter and can be connected to a direct water supply for automatic water feeding.

1. Connect the water inlet pipe to a potable water source.
2. Attach the water filter in-line with the water inlet pipe to ensure clean water for ice production.
3. Connect the water outlet (drain) pipe to a suitable drain. Ensure the drain hose is sloped downwards to allow for proper drainage.
4. Ensure all connections are secure to prevent leaks.

Image 4.2: Illustration of the healthier water filter connected to the water inlet, ensuring clean water for ice making.

4.3 Power Connection

Plug the power cord into a grounded 115-volt electrical outlet. Ensure the outlet meets the appliance's power requirements.

5. Operating Instructions

5.1 Initial Start-up

1. After connecting water and power, press the Power Button on the control panel to turn on the ice maker.
2. The machine will automatically begin the ice-making cycle. The first few batches of ice may be smaller or irregular; this is normal. Discard the first 2-3 batches of ice.

5.2 Adjusting Ice Thickness

The ice maker allows you to adjust the thickness of the ice cubes, which also affects the ice-making time.

• Use the ‘+’ and ‘-’ buttons on the control panel to increase or decrease the ice-making time, thereby adjusting ice thickness.
• Thin Ice: 5-8 minutes per cycle.
• Medium Ice: 8-11 minutes per cycle.
• Thick Ice: 11-15 minutes per cycle.
• The display shows the current ice thickness level (e.g., 1-6, with 6 being the thickest).

Image 5.1: Visual representation of different ice cube thicknesses: 1/2 (Thin Ice), 3/4 (Medium Ice), and 5/6 (Thick Ice), suitable for various applications like sashimi, beverages, or chilling bottles.

5.3 De-Icing Function

If ice accumulates excessively or needs to be cleared, you can use the de-icing function.

• Press and hold the ‘+’ button for 3 seconds to activate the de-icing cycle.

5.4 Blue Light Function

The ice maker includes a blue light inside the ice storage bin for visibility.

• Long press the ‘-’ button to turn the blue light on or off.

Image 5.2: The blue light feature illuminates the ice cubes, making them clear and easy to access.

6. Maintenance

6.1 Automatic Self-Cleaning

The ice maker features a convenient one-button automatic cleaning function.

1. Ensure the drain hose is properly connected to a drain.
2. Press the Power Button for 3 seconds to initiate the self-cleaning cycle. The machine will automatically flush its internal components.
3. Once the cycle is complete, the machine will return to standby mode.
4. Perform this cleaning cycle regularly, especially if the machine is used frequently or if water quality is a concern.

6.2 Manual Cleaning

For thorough cleaning, follow these steps:

1. Unplug the ice maker from the power outlet.
2. Drain any remaining water from the reservoir and ice bin.
3. Clean the interior surfaces of the ice bin and water reservoir with a soft cloth and a mild, food-safe cleaning solution. Rinse thoroughly with clean water.
4. Clean the exterior with a damp cloth. Do not use abrasive cleaners or solvents.
5. Regularly check and clean the air filter (if applicable) located on the side or back of the unit to ensure efficient operation.
6. Replace the water filter periodically as recommended by the manufacturer or if you notice a decrease in water quality.

7. Troubleshooting

Refer to this section for common issues and their solutions. If the problem persists, contact customer support.

8. Specifications

Detailed technical specifications for the Towallmark Commercial Ice Maker.

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact the seller directly. For technical support or service inquiries, please reach out to Towallmark customer service through their official channels or the retailer from whom the product was purchased.