1. Introduction
The LIORQUE Wireless Weather Station is designed to provide accurate indoor and outdoor temperature and humidity readings, along with a weather forecast, barometric pressure display, and alarm clock functions. This manual will guide you through the setup, operation, and maintenance of your new weather station.
The LIORQUE Weather Station offers comprehensive monitoring of indoor and outdoor environmental conditions, including temperature, humidity, and a visual weather forecast.
2. Package Contents
Please check the package contents to ensure all items are present:
- 1 x LIORQUE Weather Station Main Unit
- 1 x Wireless Outdoor Sensor
- 5 x AAA Batteries (3 for main unit, 2 for outdoor sensor)
- 1 x User Manual
Image showing the complete package contents: the weather station, outdoor sensor, five AAA batteries, and the user manual.
3. Setup Guide
3.1 Battery Installation
The weather station and outdoor sensor are battery-powered. Ensure correct polarity when inserting batteries.
- Open the battery compartment on the back of the main unit. Insert 3 AAA batteries.
- Open the battery compartment on the back of the outdoor sensor. Insert 2 AAA batteries.
- Close both battery compartments securely.
Detailed view of the battery compartments for both the main unit and the outdoor sensor, indicating the required AAA battery count for each.
3.2 Sensor Pairing
The main unit will automatically attempt to connect with the outdoor sensor upon battery installation. If connection is not established, or if you are adding additional sensors (up to 3 supported):
- Ensure both the main unit and sensor have fresh batteries.
- Place the sensor within range of the main unit (up to 100m/328ft in open air).
- Press the 'CH' button on the main unit to cycle through channels if you have multiple sensors.
- The data will update every 30 seconds once connected.
The weather station supports up to three outdoor sensors, allowing for comprehensive monitoring across different locations within your home or property.
3.3 Outdoor Sensor Placement
For accurate readings and longevity of the outdoor sensor, consider the following:
- Avoid direct sunlight: Direct sunlight can cause inaccurate temperature readings.
- Protect from rain: While the sensor has an IPX4 waterproof rating, prolonged exposure to heavy rain should be avoided. Place it under an overhang or in a sheltered area.
- Optimal height: Approximately 2.5m (8.20ft) vertical height from the ground is recommended for best air circulation and representative readings.
Guidelines for optimal outdoor sensor placement, emphasizing protection from elements and ideal mounting height.
4. Operating Instructions
4.1 Display Overview
The 4.3-inch LCD screen displays various information clearly. Key indicators include:
- Indoor Temperature and Humidity
- Outdoor Temperature and Humidity (for selected channel)
- Weather Forecast Icons
- Barometric Pressure
- Time and Date
- Max/Min Records and Trends
The main display clearly shows indoor and outdoor temperature and humidity, along with trend arrows indicating changes.
4.2 Backlight Function
The weather station features an energy-saving backlight. To activate:
- Touch the 'Snooze/Brightness' button on the front of the unit.
- The backlight will illuminate for 10 seconds and then automatically turn off to conserve battery life.
The LCD screen features an energy-saving backlight that activates for 10 seconds with a touch, improving readability in low light.
4.3 Weather Forecast
The weather station provides a forecast based on barometric pressure changes. It displays one of six weather icons:
- Sunny
- Sunny to Cloudy
- Cloudy
- Light Rain
- Heavy Rain
- Snowy
The weather station provides a visual forecast using six distinct icons, predicting upcoming weather conditions.
4.4 Alarm Clock and Snooze
The weather station includes dual alarm clocks and three snooze reminders.
- Use the buttons on the top of the unit to set the alarm time.
- Press the 'Snooze/Brightness' button to activate the snooze function when the alarm sounds.
The weather station features an integrated alarm clock with snooze functionality, making it suitable for bedside use.
4.5 Date and Time Setting
The weather station allows for manual setting of date and time, including 12/24H format and date display format (MM/DD or DD/MM).
- Refer to the specific button functions on the top of the unit for setting the time, date, and 7-language week display.
5. Maintenance
To ensure the longevity and accurate performance of your LIORQUE Weather Station:
- Cleaning: Wipe the main unit and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at once with new ones.
- Storage: If storing the device for an extended period, remove all batteries to prevent leakage.
- Environmental Conditions: Avoid exposing the main unit to extreme temperatures, direct sunlight, or high humidity.
6. Troubleshooting
If you encounter issues with your weather station, please refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| No outdoor temperature/humidity reading | Sensor not paired or out of range; low sensor battery. | Ensure sensor batteries are fresh. Re-pair sensor by pressing the 'CH' button on the main unit. Move sensor closer to the main unit. |
| Inaccurate temperature/humidity readings | Sensor exposed to direct sunlight or heat source; poor ventilation. | Relocate outdoor sensor to a shaded, well-ventilated area. Ensure main unit is not near heat/cold sources. |
| Display is dim or blank | Low main unit battery. | Replace all 3 AAA batteries in the main unit. |
| Weather forecast seems incorrect | Weather forecast is based on barometric pressure trends, not real-time conditions. | Allow 24-48 hours for the station to calibrate to local atmospheric pressure. Forecasts are predictions and may not always match current weather. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | YGH6208 |
| Product Dimensions | 2.3 x 8.7 x 12.4 cm (Main Unit) |
| Weight | 300 g |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Power Source (Main Unit) | 3 x AAA Batteries (included) |
| Power Source (Outdoor Sensor) | 2 x AAA Batteries (included) |
| Connectivity Technology | RF (Radio Frequency) |
| Wireless Range | Up to 100m / 328ft (open air) |
| Display Type | LCD with Backlight |
| Backlight Duration | 10 seconds (auto-off) |
| Outdoor Sensor Waterproof Level | IPX4 |
| Special Features | Multi-Sensor Support (up to 3), Weather Forecast, Barometric Pressure, Alarm Clock, Date, Week, Max/Min Records, Trends |
8. Warranty and Support
LIORQUE products are manufactured to high quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LIORQUE website. Keep your purchase receipt as proof of purchase for any warranty claims.
