Thermaltake TH240 V2 Ultra ARGB Sync AIO Liquid Cooler Instruction Manual

Introduction

The Thermaltake TH240 V2 Ultra ARGB Sync All-in-One Liquid Cooler is designed to provide exceptional cooling performance for your CPU while offering extensive customization options. Featuring a new industrial cap with a 2.1-inch LCD display, it allows for real-time information display and personalized visuals. Equipped with two CT120 ARGB fans and a slim radiator with a thickened copper chamber, this cooler ensures efficient heat dissipation and is suitable for various PC builds.

Key Features

• 2.1" LCD Display: High-resolution 480x480 (RGB) px display for showing 16.8M color videos, photos, real-time information, local time, and weather.
• CT120 ARGB Fans: Two 120mm ARGB fans (PWM 500~1800 R.P.M) for efficient airflow and customizable lighting.
• Copper Base Plate: High-performance copper base plate for accelerated heat conductivity.
• Slim Radiator: 27mm slim radiator with a thickened 20mm copper chamber for excellent cooling performance.
• Motherboard RGB Software Sync: Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome for unified lighting control.
• Maintenance-Free Operation: Reliable pump and low evaporation tubes ensure no refill is required.

Setup and Installation

Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific fan and pump header locations.

1. Prepare Mounting Hardware: Identify the correct mounting brackets and screws for your CPU socket (Intel LGA 2066/2011-3/2011/1700/1200/1156/1155/1151/1150 or AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1).
2. Install Radiator: Mount the 240mm radiator to an available fan mount in your PC case. Ensure proper airflow direction (intake or exhaust) based on your case's design.
3. Attach Fans: Secure the two CT120 ARGB fans to the radiator using the provided screws.
4. Install Water Block: Apply thermal paste (if not pre-applied) to the CPU. Secure the water block onto the CPU using the appropriate mounting hardware.
5. Connect Cables: Connect the pump cable to the CPU_FAN or AIO_PUMP header on your motherboard. Connect the ARGB fan cables to the motherboard's 5V ARGB header or a compatible controller. Connect the LCD display's Micro USB to a USB (9PIN) header on your motherboard.

Image: Overview of the TH240 V2 Ultra ARGB Sync All-in-One Liquid Cooler components and features.

Image: The cooler installed in a PC case, demonstrating its compatibility with various CPU sockets.

Operating Instructions

The TH240 V2 Ultra ARGB cooler is designed for plug-and-play operation with advanced customization available through software.

• Automatic Operation: The pump and fan speeds are automatically controlled via PWM signals from your motherboard, adjusting based on CPU temperature to maintain optimal cooling.
• LCD Display Customization: Utilize the TT RGB Plus 2.0 software (Windows 10/11 compatible) to customize the 2.1" LCD display. You can upload JPG, GIF, PNG, MP4, MOV, and AVI files, display real-time system information, or show local time and weather.
• RGB Lighting Control: Synchronize the ARGB lighting of the fans and water block with your motherboard's RGB software (ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome) for a cohesive lighting theme.

Image: A close-up view of the customizable 2.1-inch LCD display on the water block.

Image: The TT RGB Plus 2.0 software interface, demonstrating customization options for the LCD and RGB.

Maintenance

The Thermaltake TH240 V2 Ultra ARGB Liquid Cooler is designed for maintenance-free operation. The closed-loop system and low evaporation tubes ensure that no coolant refilling is required throughout its lifespan.

• Dust Cleaning: Periodically inspect the radiator fins and fan blades for dust accumulation. Use compressed air or a soft brush to gently remove dust, ensuring optimal airflow and cooling efficiency.
• Cable Management: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components.

Troubleshooting

• No RGB Lighting/LCD Display:
  • Check all power and signal cables are securely connected to the motherboard and the cooler.
  • Ensure the TT RGB Plus 2.0 software is installed and updated to the latest version.
  • Verify that the 5V ARGB header on your motherboard is enabled in the BIOS/UEFI.
• High CPU Temperatures:
  • Confirm the water block is properly seated on the CPU with adequate thermal paste application.
  • Check that the pump is running (you may feel a slight vibration or hear a faint hum). Ensure the pump cable is connected to the correct header (CPU_FAN or AIO_PUMP) and receiving power.
  • Verify that the fans are spinning correctly and are not obstructed by cables or dust.
  • Ensure proper airflow within your PC case.
• Excessive Noise:
  • Check fan speeds in the TT RGB Plus 2.0 software or motherboard BIOS. Adjust fan curves to reduce noise if temperatures allow.
  • Ensure no cables are hitting the fan blades.
  • If a gurgling sound is heard, it might indicate air bubbles in the loop. Gently tilt your PC case to help move air bubbles to the radiator.

Technical Specifications

CPU Socket Compatibility

The Thermaltake TH240 V2 Ultra ARGB Liquid Cooler is compatible with a wide range of Intel and AMD CPU sockets, ensuring broad system compatibility.

• Intel Sockets: LGA 2066, 2011-3, 2011, 1700, 1200, 1156, 1155, 1151, 1150
• AMD Sockets: AM5, AM4, AM3+, AM3, AM2+, AM2, FM2, FM1

Image: Various radiator sizes available in the TH V2 Ultra ARGB Series, demonstrating versatility for different builds.

Warranty and Support

For warranty information, technical support, or service inquiries, please visit the official Thermaltake website or contact their customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Online Resources: www.thermaltake.com