Ozeino ZW1 Gaming Headset Instruction Manual

1. Introduction

Thank you for choosing the Ozeino ZW1 Gaming Headset. This manual provides essential information for setting up, operating, and maintaining your headset to ensure an optimal gaming experience. Please read these instructions carefully before use.

2. Product Overview

2.1 Package Contents

• Ozeino ZW1 Gaming Headset
• 1-to-2 3.5mm Audio Jack Splitter Cable (Red for Mic, Green for Audio)
• USB Extension Cable (for RGB LED lights)
• User Manual (this document)

2.2 Key Features

• 7.1 Surround Sound: Provides immersive audio for precise in-game sound localization.
• Noise-Cancelling Microphone: A 120° adjustable omni-directional microphone designed to capture your voice clearly while minimizing background noise.
• RGB LED Lights: Automatically cycling LED lights on the earcups and microphone for enhanced aesthetics. (Requires USB power)
• Comfortable Design: Features soft memory foam ear cushions and an adjustable headband for extended wear.
• Multi-Platform Compatibility: Connects via a 3.5mm audio jack, compatible with PC, PS4, PS5, Xbox One, Xbox Series X/S, Nintendo Switch, laptops, and mobile devices.

Figure 1: Ozeino ZW1 Gaming Headset (Red variant).

3. Setup Instructions

3.1 Connecting to Consoles (PS4, PS5, Xbox One, Xbox Series X/S, Nintendo Switch)

1. Locate the 3.5mm audio jack on your console's controller (or the console itself for Switch in handheld mode).
2. Plug the headset's 3.5mm jack directly into the controller/device.
3. Adjust audio settings on your console/device as needed to ensure proper microphone and audio output.

3.2 Connecting to PC/Laptop

1. Identify the audio and microphone ports on your PC/laptop. These are typically colored green (audio) and pink (microphone), or may be a single combined port.
2. If your PC/laptop has separate audio and microphone ports, use the included 1-to-2 3.5mm audio jack splitter cable. Connect the headset's single 3.5mm jack to the splitter, then plug the red splitter end into the microphone port and the green splitter end into the audio port.
3. If your PC/laptop has a single combined 3.5mm port, plug the headset's 3.5mm jack directly into this port.
4. For RGB LED lights, plug the headset's USB connector into an available USB port on your PC/laptop.
5. Adjust sound settings in your operating system to select the headset as the default playback and recording device.

Figure 2: Headset compatibility and connection methods.

4. Operating Instructions

4.1 Volume Control

The headset features an inline control unit on the cable. Use the scroll wheel on this unit to adjust the audio volume up or down.

4.2 Microphone Usage

• Adjusting the Microphone: The microphone is flexible and can be adjusted 120° to position it optimally for your voice.
• Muting the Microphone: Use the switch located on the inline control unit to quickly mute or unmute the microphone.

Figure 3: Noise-cancelling microphone functionality.

4.3 RGB LED Lights

The RGB LED lights on the earcups and microphone are powered via the USB connection. Ensure the USB connector is plugged into a powered USB port for the lights to function. The lights cycle automatically through various colors.

Figure 4: RGB LED lights in operation.

5. Maintenance

5.1 Cleaning

• Wipe the headset surfaces, including earcups and headband, with a soft, damp cloth.
• Do not use harsh chemicals, abrasive cleaners, or immerse the headset in water.
• Ensure all ports are dry before reconnecting.

5.2 Storage

Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headset to prevent damage.

6. Troubleshooting

6.1 No Sound or Low Volume

• Check the inline volume control wheel and ensure it is turned up.
• Verify that the 3.5mm audio jack is fully inserted into the device's audio port.
• Confirm that the headset is selected as the default audio output device in your system settings (PC) or console audio settings.
• Test the headset with another device to rule out device-specific issues.

6.2 Microphone Not Working

• Ensure the microphone mute switch on the inline control unit is in the 'unmuted' position.
• For PC, ensure the 1-to-2 splitter cable's red (microphone) jack is correctly plugged into the microphone input port.
• Confirm that the headset microphone is selected as the default input device in your system settings (PC) or console audio settings.
• Test the microphone with another application or device.

6.3 RGB Lights Not Illuminating

• Ensure the USB connector is securely plugged into a powered USB port on your device.
• The USB connection is solely for powering the RGB lights; it does not transmit audio or microphone signals.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or any inquiries regarding your Ozeino ZW1 Gaming Headset, please refer to the contact information provided on the product packaging or visit the official Ozeino website. Keep your purchase receipt for warranty claims.