Introduction
This manual provides detailed instructions for assembling and caring for your 4D Build DC Comics Batman Mask 3D Puzzle Model Kit. This kit allows you to construct a detailed replica of the Batman Mask using 90 premium EPS foam pieces, designed for display without the need for glue or additional tools.
Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.
Package Contents
Before you begin, verify that all components are present in your kit:
- 8 Puzzle Sheets with 90 detailed punch-out pieces
- 1 Instruction Manual
- 1 Display Stand

Figure 1: Kit contents, including puzzle sheets and instructions. No glue or tools are required for assembly.
Setup and Assembly
Follow these steps to assemble your 4D Build Batman Mask model kit:
- Preparation: Unpack all sheets and the instruction manual. Familiarize yourself with the different puzzle sheets and the overall design.
- Punching Out Pieces: Carefully punch out each of the 90 pieces from the provided sheets. It is recommended to use a small, blunt object (like a pen cap or the provided cardboard puncher, if included) to gently push out the pieces, especially smaller ones, to prevent tearing.
- Following Instructions: Refer to the included easy-assembly instructions. The pieces are numbered, and the manual will guide you through the step-by-step process of connecting them.
- Connecting Pieces: The pieces are designed to interlock without glue. Align the tabs and slots carefully and press firmly to secure connections. Avoid forcing pieces, as this may cause damage.
- Assembling the Mask: Build the mask section by section as indicated in the instructions. Pay attention to the orientation of each piece to ensure the correct shape and detail.
- Assembling the Stand: Once the mask is complete, assemble the display stand according to the instructions. The stand is designed to securely hold the finished model.
- Final Placement: Carefully place the assembled Batman Mask onto its display stand.

Figure 2: Hands assembling the puzzle pieces. The durable pieces are designed for easy, glue-free assembly.
Operating (Display and Use)
Your 4D Build Batman Mask is designed as a collectible display item. Once assembled, it can be placed in various locations to enhance your decor.
- Placement: Position the model on a flat, stable surface such as a shelf, desk, or display cabinet.
- Environment: Keep the model in a dry environment, away from direct sunlight, excessive heat, or humidity to preserve the integrity of the EPS foam material.
- Handling: Handle the assembled model with care, especially when moving it, to prevent pieces from detaching or bending.

Figure 3: The finished Batman Mask model displayed on a desk, highlighting its dimensions.

Figure 4: The Batman Mask model designed for display, perfect for home decor.
Maintenance
To maintain the appearance and longevity of your Batman Mask model:
- Cleaning: Dust the model gently with a soft, dry cloth or a soft brush. Avoid using liquid cleaners or abrasive materials, as these can damage the EPS foam and printed details.
- Storage: If storing the model, ensure it is placed in a protective container to prevent dust accumulation and physical damage. Store in a cool, dry place.
Troubleshooting
Should you encounter any issues during assembly or with the finished model, consider the following:
- Pieces Tearing: If a piece tears during removal from the sheet or during bending, a small piece of clear adhesive tape can be used on the underside to reinforce it.
- Loose Connections: If pieces do not hold together firmly, ensure they are fully inserted into their respective slots. Gentle pressure should be applied. If a connection remains loose, a tiny drop of craft glue (not included) can be applied to the tab for a more permanent bond, though this is generally not required.
- Warped Pieces: If a piece appears warped or does not fit correctly, gently try to reshape it. Ensure you are using the correct piece for the designated slot as per the instructions.
- Missing Pieces: Double-check all puzzle sheets and packaging to ensure no pieces were overlooked. If a piece is genuinely missing, contact customer support.
Specifications
| Brand | 4D Build |
| Model Name | DC Batman Mask 3D Puzzle Model Kit |
| Model Number | 6070102 |
| Material | EPS Foam (Paper) |
| Number of Pieces | 90 |
| Assembled Dimensions (L x W x H) | 6.2 in x 5.7 in x 8.9 in (15.7 cm x 14.4 cm x 22.7 cm) |
| Recommended Age | 12+ |
| Tools Required | None (No glue or tools required) |
Warranty and Support
This product is covered by the Spin Master Care Commitment. For details regarding the commitment or for any product-related inquiries, please refer to the official Spin Master website or contact their customer support directly.
Manufacturer: Spin Master
For further assistance, please visit the 4D Build Store on Amazon or the official Spin Master support channels.