AUTOOL ATF 705 Full Automatic Transmission Fluid Exchanger Instruction Manual

1. Product Overview

The AUTOOL ATF 705 is a full automatic transmission fluid exchanger designed for efficient and thorough replacement of old transmission fluid with new fluid. It features intelligent control for precise fluid exchange, cycle cleaning, and automatic identification of oil flow direction and power polarity.

Image 1.1: AUTOOL ATF 705 unit with various connectors and accessories.

2. Safety Information

Always read and understand all safety warnings and instructions before operating the AUTOOL ATF 705. Failure to do so may result in serious injury or equipment damage.

• Ensure the work area is well-ventilated and free from ignition sources.
• Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
• Do not operate the machine with damaged cables or hoses.
• Ensure the vehicle is securely supported and the engine is off before connecting the exchanger.
• Dispose of old transmission fluid according to local environmental regulations.

3. Setup

3.1 Unpacking and Inspection

Carefully remove all components from the packaging. Inspect the unit and accessories for any signs of damage. Report any damage to your supplier immediately.

3.2 Power Connection

Connect the power clamps to the vehicle's battery. The AUTOOL ATF 705 automatically identifies positive and negative poles, preventing damage from incorrect connections.

Image 3.1: Automatic identification of power polarity for safe connection.

3.3 Hose Connection

Connect the oil inlet and outlet pipes to the vehicle's transmission system. The unit automatically identifies the oil flow direction, eliminating the need for manual distinction.

Image 3.2: Automatic identification of oil flow direction for simplified setup.

3.4 Connector Selection

Select the appropriate special connectors from the provided kit to match your vehicle's transmission system.

Image 3.3: Assortment of special connectors for diverse vehicle compatibility.

4. Operating Instructions

4.1 Control Panel Overview

The control panel provides access to all functions and displays real-time information such as oil pressure and temperature. The new and old oil levels are visually displayed.

Image 4.1: Detailed view of the control panel, showing display, pressure gauge, and oil level indicators.

4.2 Smart Exchange Process

The Smart Exchange function automates the fluid replacement process. The unit dynamically adjusts new oil flow to balance with old oil outflow, ensuring an equivalent exchange.

• The system first drains the new and old oil tanks.
• Once pressure is generated, new and old oil are dynamically replaced.
• The oil change rate can reach nearly 100%, preventing residual liquid and sludge buildup.

Image 4.2: Smart Exchange display showing real-time progress and steps.

4.3 Cycle Cleaning Function

Before fluid exchange, the unit can perform a cycle cleaning of the transmission system. This ensures the system is clean and old oil is completely discharged, improving the effectiveness of the new fluid.

• Set the desired cleaning time on the display.
• Initiate the cleaning cycle.
• The system circulates cleaning agents or a small amount of new fluid to flush out contaminants.

Image 4.3: Cycle Cleaning display showing time setting and cleaning process.

4.4 Automatic Equal Exchange

The built-in high-precision electronic scale ensures an exact equal exchange of new and old oil. This maintains the correct fluid level and pressure within the transmission system.

• Set the desired volume for exchange on the display.
• The unit will precisely exchange the specified amount of fluid.

Image 4.4: Automatic Equal Exchange display for precise volume control.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your AUTOOL ATF 705 unit.

• Cleaning: After each use, wipe down the exterior of the machine with a clean, damp cloth. Avoid using harsh chemicals.
• Hose and Connector Inspection: Regularly inspect all hoses and connectors for wear, cracks, or leaks. Replace damaged components immediately.
• Fluid Tank Management: Ensure the new and old fluid tanks are clean and free of debris. Drain old fluid completely after each use.
• Storage: Store the unit in a dry, clean environment away from direct sunlight and extreme temperatures.

6. Troubleshooting

This section addresses common issues you might encounter during operation.

• Uneven Fluid Exchange: If the new oil flows slower or faster than the old oil, the ATF 705's automatic adjustment function should compensate. If an imbalance persists, check for blockages in hoses or incorrect connections.
• No Power: Ensure the power clamps are securely connected to the vehicle battery and the battery has sufficient charge. Check all power cables for damage.
• Display Not Working: Verify power connection. If the issue persists, contact customer support.
• Fluid Leaks: Immediately stop operation. Check all hose connections and ensure they are tight. Inspect hoses and connectors for damage.

For issues not covered here, please refer to the Warranty & Support section for contact information.

7. Specifications

Technical specifications for the AUTOOL ATF 705 unit.

Image 7.1: Visual representation of product specifications and dimensions.

8. Warranty and Support

AUTOOL provides a comprehensive warranty and dedicated customer support for the ATF 705.

8.1 Warranty Information

The AUTOOL ATF 705 comes with a Three Years Warranty. For damage caused by non-human factors, AUTOOL commits to resending parts for free within this 3-year period.

8.2 Customer Support

For any inquiries, technical assistance, or warranty claims, please contact AUTOOL customer support. We aim to respond as soon as possible, typically within 24 hours.

• Online Support: Visit the official AUTOOL website for FAQs and support resources.
• Email Support: Refer to your product packaging or the official website for the customer service email address.