Bukumo home safe fireproof waterproof

Bukumo 3.9 Cubic Foot Home Safe Instruction Manual

Model: home safe fireproof waterproof

Introduction

Thank you for choosing the Bukumo 3.9 Cubic Foot Home Safe. This manual provides essential information for the proper setup, operation, and maintenance of your new safe. Please read these instructions carefully before use to ensure optimal security and functionality.

Bukumo 3.9 Cubic Foot Home Safe with open door showing interior compartments and digital keypad

Image: The Bukumo 3.9 Cubic Foot Home Safe, featuring its open door revealing internal storage, a fireproof lock box, and the digital keypad.

Safety Information

  • Keep Keys Secure: Store emergency keys in a secure location away from the safe and not inside the safe itself.
  • Battery Safety: Use only recommended battery types. Do not mix old and new batteries or different battery types. Remove batteries if the safe will not be used for an extended period.
  • Mounting: For enhanced security, it is highly recommended to securely mount the safe to a floor or wall using the provided hardware.
  • Children and Pets: Keep children and pets away from the safe, especially during operation, to prevent accidental lock-ins or access to contents.
Family with children near the safe, illustrating the importance of keeping dangerous items away from children.

Image: An illustration emphasizing the importance of keeping valuables and potentially dangerous items secured within the safe, away from children.

Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact customer support immediately.

  • Bukumo 3.9 Cubic Foot Home Safe
  • Emergency Keys (2)
  • External Battery Box
  • Mounting Hardware (bolts, washers)
  • Instruction Manual (this document)
  • Removable Shelf
  • Fireproof Lock Box (internal)

Setup

1. Initial Opening

Upon receiving your safe, it will be in a locked state. To open it for the first time:

  1. Locate the emergency keyhole cover on the digital keypad panel.
  2. Gently remove the cover.
  3. Insert one of the emergency keys into the keyhole and turn it clockwise.
  4. While the key is turned, rotate the handle clockwise to open the safe door.
  5. Remove the emergency key and store it in a safe place outside the safe.
Close-up of the safe's digital keypad showing the emergency keyhole and main keyhole.

Image: A detailed view of the safe's digital keypad, highlighting the emergency keyhole, main keyhole, and LCD screen.

2. Battery Installation

The safe requires 4 AA batteries (not included) to power the digital keypad. Install them after the initial opening:

  1. Open the safe door.
  2. Locate the battery compartment on the inside of the safe door.
  3. Open the battery compartment cover.
  4. Insert 4 new AA batteries, ensuring correct polarity (+/-).
  5. Close the battery compartment cover.

3. Setting Your Passcode

It is crucial to set your personal passcode immediately after battery installation. Keep the safe door open during this process.

  1. With the safe door open, press the red reset button located on the inside of the safe door, near the hinge. You will hear a beep.
  2. On the digital keypad, enter your desired 3-8 digit passcode.
  3. Press the "#" button to confirm. The LCD screen will display "DONE" and you will hear a confirmation beep.
  4. Test your new passcode with the door open before closing it. Enter your passcode, then press "#". The screen should display "OPEN". Rotate the handle to confirm the lock mechanism retracts.

Important: Do not close the safe door until you have successfully tested your new passcode multiple times.

4. Mounting the Safe (Optional, Recommended)

For maximum security, the safe can be mounted to a floor or wall. Mounting hardware is included.

  1. Choose a suitable location. Ensure the mounting surface (floor or wall) is structurally sound.
  2. Inside the safe, locate the pre-drilled mounting holes on the back and/or bottom.
  3. Position the safe and mark the drilling points on the mounting surface through the holes.
  4. Move the safe and drill pilot holes into the marked spots using an appropriate drill bit for your surface type.
  5. Reposition the safe, align the holes, and secure the safe using the provided expansion bolts and washers. Tighten firmly.
Diagram showing steps for wall or floor mounting the safe.

Image: A three-step diagram illustrating the process of securely mounting the safe to a wall or floor.

Operating Instructions

1. Opening with Passcode (Daily Use)

  1. Enter your 3-8 digit passcode on the digital keypad.
  2. Press the "#" button. The LCD screen will display "OPEN".
  3. Within 5 seconds, rotate the handle clockwise to open the safe door.
  4. To lock, simply close the door and rotate the handle counter-clockwise. The bolts will extend, securing the door.
Diagram showing three methods to open the safe: digital lock, emergency key, and external battery box.

Image: An infographic detailing the three methods for opening the safe: using the digital keypad, the emergency key, and the external battery box.

2. Opening with Emergency Key (Forgotten Passcode or Dead Batteries)

If you forget your passcode or the batteries are completely dead, you can use the emergency key:

  1. Remove the emergency keyhole cover.
  2. Insert an emergency key into the keyhole and turn it clockwise.
  3. Rotate the handle clockwise to open the safe door.

3. Opening with External Battery Box (Low Batteries)

If the batteries are low and the keypad is unresponsive, but not completely dead, you can use the external battery box:

  1. Insert 4 new AA batteries into the external battery box.
  2. Plug the external battery box cable into the port located on the digital keypad panel (usually below the main keyhole).
  3. Enter your passcode and press "#" as usual.
  4. Rotate the handle to open the safe.
  5. Replace the internal batteries immediately after opening.

4. Alarm System

The safe is equipped with an alarm system for added security:

  • Incorrect Entry Alarm: If an incorrect passcode is entered 3 consecutive times, the alarm will sound for a short period.
  • Vibration Alarm: The safe may also trigger an alarm if subjected to violent vibrations or tampering attempts.
  • To silence the alarm, enter the correct passcode or use an emergency key.
Illustration of the smart alarm system activating after incorrect entries.

Image: A visual representation of the safe's smart alarm system, indicating activation upon three incorrect passcode entries.

Maintenance

1. Battery Replacement

When the battery indicator on the LCD screen shows low power, or if the keypad becomes unresponsive, replace the batteries:

  1. Open the safe door.
  2. Open the battery compartment on the inside of the door.
  3. Remove the old batteries.
  4. Insert 4 new AA batteries, observing correct polarity.
  5. Close the battery compartment cover.

Note: Replacing batteries does not erase your set passcode.

2. Cleaning

To clean the exterior of your safe:

  • Use a soft, damp cloth.
  • Avoid abrasive cleaners or solvents, as these can damage the finish.
  • Do not spray cleaning solutions directly onto the keypad or lock mechanism.

Troubleshooting

Problem Possible Cause Solution
Safe does not open with passcode. Incorrect passcode entered.
Batteries are low or dead.		 Re-enter the correct passcode carefully.
Replace batteries or use the external battery box. Use emergency key if necessary.
Keypad is unresponsive. Batteries are dead or incorrectly installed. Check battery polarity. Replace batteries. Use external battery box or emergency key.
Alarm sounds unexpectedly. Incorrect passcode entered multiple times.
Safe experienced a strong vibration.		 Enter correct passcode to silence. Avoid bumping or moving the safe forcefully.
Door does not close or lock properly. Obstruction in the door frame.
Locking bolts are not aligned.		 Check for any items blocking the door. Ensure the safe is on a level surface.

Specifications

  • Brand: Bukumo
  • Model: home safe fireproof waterproof
  • Capacity: Approximately 3.9 Cubic Feet
  • Dimensions (External): 14.17 x 16.14 x 23.6 inches (Product Dimensions)
  • Weight: Approximately 65.9 pounds
  • Lock Type: Digital Keypad with Emergency Key Override
  • Mounting Type: Floor Mount (also suitable for wall mounting)
  • Material: Heavy Duty Steel
  • Power: 4 x AA Batteries (not included)
Image showing the external dimensions of the safe.

Image: The Bukumo home safe with its external dimensions clearly marked, showing height, width, and depth.

Warranty and Support

Bukumo provides a 5-year warranty for this product, covering manufacturing defects and material flaws under normal use. For warranty claims, technical assistance, or parts replacement, please contact Bukumo customer support.

Contact Information: Please refer to the contact details provided on the Bukumo official website or your purchase documentation for the most up-to-date support information.

Bukumo Care logo with icons for 5 Years Warranty, Quick Response, Faster Delivery, and Parts Replacement.

Image: Bukumo Care information, highlighting a 5-year warranty, quick response support, and parts replacement services.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.