Product Overview
The Stealth JHT100 is a 32-inch tower PTC ceramic heater designed for efficient and quiet heating in various indoor spaces. It features multiple operating modes, a programmable timer, and advanced safety protections.
Image: The Stealth JHT100 tower heater in a room setting, showcasing its sleek design.
Safety Information
Your safety is paramount. Please read and understand all safety instructions before operating this appliance.
- Tip-Over Protection: The heater is equipped with an internal switch that automatically shuts off the unit if it is accidentally tipped over.
- Overheat Protection: An integrated overheat sensor will automatically turn off the heater if it reaches an unsafe temperature.
- V0 Flame Retardant Materials: Constructed with V0 flame retardant materials for enhanced safety.
- Polarized Safety Plug: Features a polarized plug to reduce the risk of electric shock.
- Always ensure the heater is placed on a firm, level surface.
- Do not cover the heater or block its air inlets/outlets.
- Keep flammable materials at least 3 feet (0.9 meters) away from the heater.
- Do not use in wet or moist locations.
Image: Diagram illustrating the multiple safety features of the heater, including tip-over and overheat protection.
Package Contents
Upon unpacking, please ensure all items listed below are present and undamaged:
- Stealth JHT100 Tower Heater Unit
- Detachable Base (2 halves)
- Mounting Screws for Base
- Remote Control (with pre-installed battery and plastic tab)
- Instruction Manual
Setup
- Base Assembly:
Align the two halves of the detachable base and snap them together. Ensure the power cord passes through the designated slot in the base. Secure the base to the bottom of the heater unit using the provided screws. This step is crucial for stability and safety.
Image: A person demonstrating the assembly of the heater's base, showing the separate base parts and the attachment points.
- Remote Control Setup:
The remote control comes with a plastic tab separating the battery from the contacts to preserve battery life. Gently pull out this plastic tab before first use. The remote requires a CR2025 lithium cell 3V battery.
- Power Connection:
Plug the polarized power cord into a suitable 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.
Operating Instructions
The Stealth JHT100 heater can be operated using the touch control panel on top of the unit or the included remote control.
Image: Close-up of the touch control panel on top of the heater, showing the power, mode, oscillation, and timer buttons.
1. Power On/Off
- Main Power Switch: Locate the main power switch at the back of the heater, near the base. Flip it to the "ON" position. A red indicator light will appear on the front display.
- Unit Power Button: Press the Power button (
) on the control panel or remote to turn the heater on or off.
2. Heat Modes
The heater offers 4 modes: Low Heat (700W), High Heat (1500W), and Fan Only. The unit cycles through these modes with each press of the Mode button.
- Press the Mode button (
) to cycle through the available heating and fan modes. The red indicator light will adjust to reflect the selected mode (e.g., longer bar for higher heat).
Image: Diagram showing the internal PTC heating elements and the two heat settings: Low Heat (700W) and High Heat (1500W).
3. Oscillation
Activate the 70° wide oscillation feature to distribute warmth evenly across a larger area.
- Press the Oscillation button (
) to start or stop the oscillation function.
Image: Overhead view illustrating the 70-degree auto oscillation feature, showing heat distribution across a room.
4. Timer Function
Set a timer for automatic shut-off, ranging from 1 to 6 hours, in 1-hour increments.
- Press the Timer button (
) repeatedly to select the desired shut-off time (1H, 2H, 3H, 4H, 5H, 6H). - To cancel the timer, continue pressing the Timer button until no timer indicator is displayed, or press it a seventh time to cycle back to no timer.
Image: A person sleeping peacefully with the heater operating quietly in the background, highlighting the 6-hour timer feature.
5. Remote Control
The remote control duplicates all functions available on the unit's top control panel for convenient operation from a distance. Store the remote in the designated slot on the back of the heater when not in use to prevent misplacement.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning the Air Filter: The heater features a removable and washable air filter located at the back. Periodically remove the filter and clean it with mild soap and warm water to prevent dust buildup and maintain air quality. Ensure the filter is completely dry before reinserting.
- Exterior Cleaning: Wipe the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Always unplug the heater from the power outlet before performing any cleaning or maintenance.
Image: Diagram showing the removable mesh air filter at the back of the heater, indicating it can be cleaned.
Troubleshooting
If your heater is not functioning as expected, please consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. |
|
|
| Heater turns off unexpectedly. |
|
|
| Heat output is low. |
|
|
Specifications
- Brand: Stealth
- Model Number: JHT100
- Form Factor: Tower
- Heat Output: 1500 Watts
- Amperage: 12.5 Amps
- Product Dimensions: 8 x 11 x 32 inches
- Item Weight: 10.58 pounds
- Power Source: Corded Electric
- Heating Method: Convection, Forced Air
- Oscillation: 70° Wide Oscillation
- Timer: 1-6 Hours
- Safety Features: Tip-Over Protection, Overheat Protection, V0 Flame Retardant Materials, Polarized Safety Plug
Image: The 32-inch tall heater with a convenient carry handle, illustrating its portable design.
Warranty and Support
Stealth products are covered by a 24-month manufacturer and distributor warranty. This warranty covers defects in materials and workmanship of the enclosed product. It does not cover problems caused by misuse, abuse, acts of God (such as floods, hurricanes), consequential, or incidental damages.
The warranty coverage terminates if you sell or otherwise transfer the ownership of the product.
If you believe you have a defective product, please contact us first. We will assist you to solve the issues within 24 hours.
For support, please refer to the contact information provided on your warranty card or visit the official Stealth website.
