Important Safety Information
Please read and understand all instructions before using this product. Failure to follow these instructions may result in serious injury or product damage. Keep this manual for future reference.
- This air mattress is not a flotation device. Do not use in water.
- Keep away from sharp objects, heat sources, and open flames.
- Do not overinflate. Overinflation can cause the mattress to burst.
- Ensure the inflation valve is securely closed after inflation to prevent air leakage.
- Supervise children when they are near or on the air mattress.
- Do not stand or jump on the mattress.
- Maximum weight capacity: 600 lbs (272 kg). Do not exceed this limit.
Package Contents
Verify that all components are present before setup:
Image: Contents of the Intex TruAire Camping Mattress package, including the mattress, pump, cables, and carry bags.
- Intex TruAire Camping Mattress (Full Size)
- QuickFill USB Air Pump
- USB-C to USB-A Cable (8.5 feet)
- Camping Mat Carry Bag
- USB Pump Carry Pouch
- Instruction Manual (this document)
Setup and Inflation
1. Unpacking and Preparation
- Remove the air mattress from its carry bag.
- Unroll the mattress on a clean, level surface, free from sharp objects.
- Locate the inflation valve on the mattress.
2. Inflation using the QuickFill USB Air Pump
Image: The QuickFill USB Mini Pump being connected to the air mattress for inflation.
- Connect the USB-C end of the provided cable to the QuickFill USB Air Pump and the USB-A end to a compatible USB power source (e.g., power bank, wall adapter, car charger).
- Attach the appropriate nozzle from the pump to the inflation valve on the mattress. Ensure a snug fit.
- Turn on the pump. The mattress will begin to inflate.
- Inflate the mattress to your desired firmness. Avoid overinflation.
- Once inflated, turn off the pump and quickly remove the nozzle. Securely close the inflation valve cap.
Video: Demonstration of the Intex TruAire Camping Mattress setup and usage, including inflation.
Operation and Usage
The Intex TruAire Camping Mattress is designed for comfort and durability in various outdoor settings.
Image: The Intex TruAire Luxury Camping Mattress, ready for use.
Comfort Adjustment
You can adjust the firmness of the mattress by adding or releasing small amounts of air. For a softer feel, release air until comfortable. For a firmer feel, add more air.
Built-in Headrest
The mattress features a built-in headrest for added comfort, eliminating the need for an extra pillow in many situations.
Weight Capacity
The mattress is designed to support up to 600 lbs (272 kg). Distribute weight evenly across the surface.
Care and Maintenance
Cleaning
To clean the mattress, wipe the surface with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Ensure the mattress is completely dry before storing.
Storage
- Deflate the mattress completely by opening the valve and pressing out all air. You can use the pump in reverse mode if available, or manually roll the mattress to expel air.
- Fold or roll the mattress neatly.
- Place the deflated mattress and pump into their respective carry bags.
- Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Image: The Intex TruAire Camping Mattress compactly stored in its carry bag, ready for transport.
Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mattress deflates slowly | Valve not fully closed; small puncture; temperature change. | Ensure valve cap is secure. Check for punctures using soapy water. Air mattresses can lose some firmness in cooler temperatures; re-inflate if necessary. |
| Pump not working | No power; cable not connected properly. | Ensure USB cable is securely connected to both pump and power source. Try a different USB power source. |
| Mattress not firm enough | Insufficient inflation. | Add more air using the pump until desired firmness is achieved. |
Product Specifications
Image: Dimensions of the Intex TruAire Full Size Camping Mattress.
| Feature | Detail |
|---|---|
| Model Name | INTEX Camping Mattress |
| Model Number | 64012E |
| Size | Full (75"L x 54"W x 8.5"Th) |
| Material | TPU (Thermoplastic Polyurethane) |
| Construction | Fiber-Tech™ Internal Construction |
| Weight Capacity | 600 lbs (272 kg) |
| Pump Type | QuickFill USB Air Pump |
| Item Weight | 5 pounds (2.27 kg) |
| Color | Blue |
Warranty and Customer Support
The Intex TruAire Camping Mattress comes with a 2-Year Limited Warranty. This warranty covers manufacturing defects under normal use conditions.
For warranty claims, technical assistance, or any questions regarding your product, please contact Intex customer support. Refer to the packaging or the official Intex website for the most current contact information.
When contacting support, please have your product model number (64012E) and proof of purchase available.
